Date: Thu, 09 Aug 2007 08:39:20 +0200 From: Ingeborg Hellemo <Ingeborg.Hellemo@cc.uit.no> To: freebsd-questions@freebsd.org, freebsd-scsi@freebsd.org Subject: Qlogic FC-card can't find disk on SATAbeast Message-ID: <200708090639.l796dKLJ073662@barnetv.cc.uit.no>
next in thread | raw e-mail | index | archive | help
(This SAN-stuff is one of my weak subjects, so please excuse me if I use the wrong terms. If there is a better list to ask this question, please tell me.) HW: ProLiant DL380 G4 OS: FreeBSD 6.2-RELEASE-p7 FC-card: isp0: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x5000-0x50ff mem 0xfdff0000-0xfdff0fff irq 97 at device 1.0 on pci10 ~/#kldstat Id Refs Address Size Name 1 9 0xc0400000 7261f4 kernel 2 1 0xc0b27000 93040 ispfw.ko 3 1 0xc0bbb000 59f20 acpi.ko 4 1 0xc6dea000 16000 linux.ko I am trying to access a disk-device on a SATABeast, but no success: ~/#camcontrol rescan all Re-scan of bus 0 was successful Re-scan of bus 1 was successful Re-scan of bus 2 was successful Re-scan of bus 3 was successful ~/#camcontrol devlist -v scbus0 on ciss0 bus 0: <COMPAQ RAID 1 VOLUME OK> at scbus0 target 0 lun 0 (pass0,da0) scbus1 on ciss0 bus 32: scbus2 on ciss0 bus 33: scbus3 on isp0 bus 0: < > at scbus3 target -1 lun -1 () scbus-1 on xpt0 bus 0: < > at scbus-1 target -1 lun -1 (xpt0) If we try to connect the fibre to our HP EVA SAN the disk shows up after a 'rescan all' which makes me believe that I have not done any major screw-ups in configuring the card. I can see the device and LUN-number if I enter the cards BIOS, but not from FreeBSD. We have tried changing disk-size and LUN-number on the Beast. Any ideas? -- Ingeborg Østrem Hellemo -- ingeborg@cc.uit.no (Univ. of Tromsø, Norway)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200708090639.l796dKLJ073662>