Date: Fri, 16 May 2003 16:15:52 +0200 (CEST) From: Per@truckin.inter-sonic.com, olof@truckin.inter-sonic.com, Ljungmark@truckin.inter-sonic.com To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/52331: 4.7 to 4.8-REL upgrade: SCSI disks on sym disappears Message-ID: <20030516141552.440AAA925@truckin.inter-sonic.com> Resent-Message-ID: <200305161420.h4GEKD88096645@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 52331
>Category: kern
>Synopsis: 4.7 to 4.8-REL upgrade: SCSI disks on sym disappears
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri May 16 07:20:12 PDT 2003
>Closed-Date:
>Last-Modified:
>Originator: Per olof Ljungmark
>Release: FreeBSD 4.8-RELEASE i386
>Organization:
Intersonic AB
>Environment:
System: FreeBSD truckin.inter-sonic.com 4.8-RELEASE FreeBSD 4.8-RELEASE #0: Fri May 16 14:36:31 CEST 2003 peo@truckin.inter-sonic.com:/usr/obj/usr/src/sys/TRUCKIN i386
truckin# dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Fri May 16 14:36:31 CEST 2003
peo@truckin.inter-sonic.com:/usr/obj/usr/src/sys/TRUCKIN
Machine is Compaq ProLiant 1850R dual PII450 with attached
Storage System U2. A Compaq Smart 3200 RAID controller (working)
and the internal sym are both used, the latter with vinum.
dmesg output:
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (448.64-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 536854528 (524272K bytes)
avail memory = 517832704 (505696K bytes)
Changing APIC ID for IO APIC #0 from 0 to 8 on chip
Programming 35 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 8, version: 0x00220011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc046a000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
sym0: <875> port 0x2000-0x20ff mem 0xc6eff000-0xc6efffff,0xc6efcf00-0xc6efcfff irq 5 at device 6.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x2400-0x24ff mem 0xc6efe000-0xc6efefff,0xc6efce00-0xc6efceff irq 10 at device 6.1 on pci0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
tl0: <Compaq Netelligent 10/100 Proliant> port 0x2c00-0x2c0f mem 0xc6efccf0-0xc6efccff irq 11 at device 7.0 on pci0
tl0: Ethernet address: 00:08:c7:33:40:bf
miibus0: <MII bus> on tl0
lxtphy0: <LXT970 10/100 media interface> on miibus0
lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy0: <ThunderLAN 10baseT media interface> on miibus0
tlphy0: 10base2/BNC, 10base5/AUI
pci0: <ATI Mach64-GV graphics accelerator> at 8.0
pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 9.0
pcib1: <IBM 82351 PCI-PCI bridge> at device 16.0 on pci0
pci1: <PCI bus> on pcib1
ida0: <Compaq Smart Array 3200 controller> port 0x3000-0x30ff mem 0xc6ffff00-0xc6ffffff irq 15 at device 0.0 on pci1
ida0: drives=2 firm_rev=3.08
idad0: <Compaq Logical Drive> on ida0
idad0: 17363MB (35561280 sectors), blocksize=512
idad1: <Compaq Logical Drive> on ida0
idad1: 52095MB (106692000 sectors), blocksize=512
isab0: <Intel 82371AB PCI to ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf100-0xf10f at device 20.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 20.2 irq 0
piix0: <Intel 82371AB Power management controller> at device 20.3 on pci0
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0679 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xee000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: CGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
ata0-slave: ATAPI identify retries exceeded
SMP: AP CPU #1 Launched!
acd0: CDROM <CD-224E> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/idad0s1a
da0 at sym0 bus 0 target 0 lun 0
da0: <COMPAQ AB00931B92 3AS8> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C)
da3 at sym1 bus 0 target 4 lun 0
da3: <COMPAQ MAB3091SC 0814> Fixed Direct Access SCSI-2 device
da3: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da3: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C)
da1 at sym0 bus 0 target 1 lun 0
da1: <COMPAQ AB00931B92 3AS8> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C)
da2 at sym1 bus 0 target 3 lun 0
da2: <COMPAQ AB00931B92 3AS8> Fixed Direct Access SCSI-2 device
da2: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da2: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C)
>Description:
This was a perfectly working 4.7-REL system with 8 identical da0-7
9.1GB on sym. After upgrade, da4-7 are invisible. I have run MAKEDEV
for da4-7 after upgrade.
>How-To-Repeat:
Install 4.8 on above system (I have done it three times with identical result)
>Fix:
Don't know.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030516141552.440AAA925>