Date: Tue, 4 Oct 2005 20:39:45 -0400 From: Parv <parv@pair.com> To: Brian John <brianjohn@fusemail.com> Cc: f-q <freebsd-questions@freebsd.org> Subject: Re: 5.4 reboots when I plug in a flash drive? Message-ID: <20051005003945.GA54805@holestein.holy.cow> In-Reply-To: <43431D86.40903@fusemail.com> References: <1468.209.87.176.132.1128439684.fusewebmail-19592@webmail.fusemail.com> <20051005000110.GA51496@holestein.holy.cow> <43431D86.40903@fusemail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
in message <43431D86.40903@fusemail.com>, wrote Brian John thusly... > > Ok, I tried booting up with the drive installed. If I leave it > installed while it is booting up, it eventually reboots. Sorry about that that did not help. :( > However, I was able to unplug it during boot and look at dmesg. > It says this over and over again: > > umass0: vendor 0x10d6 USB 2.0(FS) FLASH DISK, rev 1.10/1.00, addr 2 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <USB2.0 (FS) FLASH DISK 1.00> Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: 119MB (245473 512 byte sectors: 64H 32S/T 119C) > umass0: BBB reset failed, STALLED > umass0: BBB bulk-in clear stall failed, STALLED > umass0: BBB bulk-out clear stall failed, STALLED > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 ... > umass0: BBB reset failed, STALLED > umass0: BBB bulk-in clear stall failed, STALLED > umass0: BBB bulk-out clear stall failed, STALLED > umass0: at uhub2 port 1 (addr 2) disconnected > (da0:umass-sim0:0:0:0): lost device > (da0:umass-sim0:0:0:0): removing device entry > Opened disk da0 -> 5 > umass0: detached > > I am running FreeBSD 5.4. Does this shed some light on the problem? I personally can't say; i requested the above information so that others may be able to help you. - Parv --
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051005003945.GA54805>