Date: Thu, 06 Nov 2008 16:37:29 +0100 From: Lars Engels <lars.engels@0x20.net> To: Alexander Motin <mav@FreeBSD.org> Cc: freebsd-arm@FreeBSD.org, freebsd-current@freebsd.org, imp@FreeBSD.org, freebsd-mobile@FreeBSD.org Subject: Re: RFC: PCI SD host controller driver & mmc/mmcsd modules improvements Message-ID: <20081106163729.clcw2eulgk0k4w0c@0x20.net> In-Reply-To: <49130918.5030904@FreeBSD.org> References: <48DEA8E7.2080503@FreeBSD.org> <20081106153059.1sf731434swc84so@0x20.net> <49130918.5030904@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Quoting Alexander Motin <mav@FreeBSD.org>: > Lars Engels wrote: >> I just tried your latest version of mmc + sdhci but it does not detect >> any SD Card inserted: >> >> sdhci0: <RICOH R5C822 SD> mem 0xe4003000-0xe40030ff irq 19 at device 6.3 >> on pci2 >> >> Nothing happens when I insert a card. >> >> The hardware is: >> sdhci0@pci0:2:6:3: class=0x080500 card=0x30c3103c chip=0x08221180 >> rev=0x20 hdr=0x00 >> vendor = 'Ricoh Company, Ltd.' >> device = 'R5C832, R5C843 SDA Standard Compliant SD Host Controller' >> class = base peripheral >> none2@pci0:2:6:4: class=0x088000 card=0x30c3103c chip=0x08431180 >> rev=0x10 hdr=0x00 >> vendor = 'Ricoh Company, Ltd.' >> device = 'unknown Ricoh MMC Host Controller' >> class = base peripheral >> none3@pci0:2:6:5: class=0x088000 card=0x30c3103c chip=0x05921180 >> rev=0x10 hdr=0x00 >> vendor = 'Ricoh Company, Ltd.' >> device = '13871043 Ricoh Memory Stick Host Controller' >> class = base peripheral >> none4@pci0:2:6:6: class=0x088000 card=0x30c3103c chip=0x08521180 >> rev=0x10 hdr=0x00 >> vendor = 'Ricoh Company, Ltd.' >> device = 'unknown Ricoh xD-Picture Card Host Controller' >> class = base peripheral > > Looks like there is two MMC/SD controllers (first two devices) in your > chip while only one is detected as SD host controller. This thread looks > related to your problem: > http://list.drzeus.cx/pipermail/sdhci-devel/2007-September/002023.html > > 1. You may try to tune PCI configuration registers referred in that post. > 2. Or (just an idea) you may try to power down unsupported devices with > setting hw.pci.do_power_nodriver=3 into the device.hints. > 3. Or (it works fine for my ENE CB714 chip) you may try to add > 0x08431180 chip ID into the list of supported SD controllers like it is > done for 0x08221180. They may be compatible enough. > > If you try it, report please about results. Alexander, thanks for the quick response! 1. How can I tune the PCI configuration? With pciconf -w or so? 2. Unfortunately the sysctl did not change a thing with regard to the Card reader. 3. I added the chip ID and the second device is now recognized as a sdhci device but still does not see any card inserted: Nov 6 16:32:20 NB0117232 kernel: sdhci0: <RICOH R5C822 SD> mem 0xe4003000-0xe40030ff irq 19 at device 6.3 on pci2 Nov 6 16:32:20 NB0117232 kernel: sdhci0: 1 slot(s) allocated Nov 6 16:32:20 NB0117232 kernel: sdhci0: [ITHREAD] Nov 6 16:32:20 NB0117232 kernel: sdhci1: <RICOH R5C843 SD> mem 0xe4004000-0xe40040ff irq 19 at device 6.4 on pci2 Nov 6 16:32:20 NB0117232 kernel: sdhci1: Hardware doesn't specify base clock frequency. Nov 6 16:32:20 NB0117232 kernel: sdhci1: Hardware doesn't specify timeout clock frequency. Nov 6 16:32:20 NB0117232 kernel: sdhci1: Hardware doesn't report any support voltages. Nov 6 16:32:20 NB0117232 kernel: sdhci1: 1 slot(s) allocated Nov 6 16:32:20 NB0117232 kernel: sdhci1: [ITHREAD] Nov 6 16:32:31 NB0117232 kernel: mmc0: <MMC/SD bus> on sdhci1 sdhci1@pci0:2:6:4: class=0x088000 card=0x30c3103c chip=0x08431180 rev=0x10 hdr=0x00 vendor = 'Ricoh Company, Ltd.' device = 'unknown Ricoh MMC Host Controller' class = base peripheral [-- Attachment #2 --] -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (FreeBSD) iEYEABECAAYFAkkTDzkACgkQKc512sD3afg4PwCgycgCK5dhPLarn5tYE+XG//8w 8YAAn3F1LurybzALvpvICJS3/356PN2c =V1Yz -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081106163729.clcw2eulgk0k4w0c>