Date: Sun, 13 Apr 1997 22:25:35 -0400 From: Rajesh Acharya <rajesha@ct-yardley.com> To: questions@FreeBSD.org Subject: Configuring kernel for Intel EtherExpress PRO/100 Message-ID: <3351959F.348B@ct-yardley.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------1FD31B94499E
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
I am trouble to get the kernel to recognize the Intel EtherExpress
PRO/100.
Here is the system setup:
Using: FreeBSD 4.4 Lite (release: 2.1.7)
Distrib: Walnut Creek Cdrom (www.cdrom.com)
System:
Intel Pentium 100MHz CPU
PCI/ISA Motherboard
32MB Ram
Intel EtherExpress PRO/100 (ISA)
Port I/O: 300 IRQ: 10
Cirrus Logic PCI VGA card
HD:- Conner CFS1275A 1.2GB
CD:- Mitsumi IDE CD-ROM (CRMC-FX400D1)
recognized as "wcd0"
Steps took to customize the kernel:
1) copied the GENERIC kernel template (/usr/sys/src/i386/conf/GENERIC)
as POSTOFFICE
2) used 'vi' and commented out any net devices that used I/O:300,
IRQ:10
3) executed: '/usr/sbin/config POSTOFFICE'
4) change directory to '../../compile/POSTOFFICE'
5) issue a 'make' to build a new kernel
6) after build, issue a 'make install'.
7) issue 'shutdown -r now' to restart the system
after system started, the kernel could still not recognize the ethernet
card
reports:
:{other stuff}
ix0 not found at 0x300
:{other stuff}
I checked in the /dev directory for ix0 but there was none.
Attached is the config file 'POSTOFFICE'. I would appreciate if you
could get me an answer for this problem immediately.
Rajesh Acharya
Cybertech Intl, Inc
rajesha@ct-yardley.com
--------------1FD31B94499E
Content-Type: text/plain; charset=us-ascii; name="POSTOFFICE"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="POSTOFFICE"
#
# POSTOFFICE
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# $Id: GENERIC,v 1.46.2.19 1996/10/16 02:20:56 jkh Exp $
#
machine "i386"
cpu "I386_CPU"
cpu "I486_CPU"
cpu "I586_CPU"
ident POSTOFFICE
maxusers 10
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3
options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device
options BOUNCE_BUFFERS #include support for DMA bounce buffers
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options SYSVSHM
options SYSVSEM
options SYSVMSG
config kernel root on wd0
controller isa0
controller eisa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
tape ft0 at fdc0 drive 2
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
options ATAPI #Enable ATAPI support for IDE bus
device wcd0 #IDE CD-ROM
controller ncr0
controller ahb0
controller ahc0
controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr
controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
#controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr
controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr
controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr
controller scbus0
device sd0
device st0
device cd0 #Only need one of these, the code dynamically grows
#device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
# device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
controller matcd0 at isa? port 0x230 bio
device scd0 at isa? port 0x230 bio
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
#options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1
#options XSERVER # include code for XFree86
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Mandatory, don't remove
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
#
# Laptop support (see LINT for more options)
#
#device apm0 at isa? # Advanced Power Management
#options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr
device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
device lpt1 at isa? port? tty
device mse0 at isa? port 0x23c tty irq 5 vector mseintr
device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device de0
device fxp0
device vx0
#device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
#device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
# device ep0 at isa? port 0x300 net irq 10 vector epintr
device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
# device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
pseudo-device loop
pseudo-device ether
pseudo-device log
pseudo-device sl 1
# ijppp uses tun instead of ppp device
#pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
--------------1FD31B94499E--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3351959F.348B>