Date: Tue, 7 Mar 2000 16:37:06 -0600 (CST) From: Kevin Day <toasty@dragondata.com> To: scsi@freebsd.org Subject: DLT problems Message-ID: <200003072237.QAA93944@celery.dragondata.com>
next in thread | raw e-mail | index | archive | help
When doing a backup to my DLT occasionally, I get the following: (sa0:ahc0:0:2:0): SCB 0xc - timed out while idle, LASTPHASE == 0x1, SEQADDR == 0xa (sa0:ahc0:0:2:0): Queuing a BDR SCB (sa0:ahc0:0:2:0): Bus Device Reset Message Sent (sa0:ahc0:0:2:0): no longer in timeout, status = 34b ahc0: Bus Device Reset on A:2. 1 SCBs aborted (sa0:ahc0:0:2:0): LOAD UNLOAD. CDB: 1b 0 0 0 1 0 (sa0:ahc0:0:2:0): UNIT ATTENTION asc:28,0 (sa0:ahc0:0:2:0): Not ready to ready change, medium may have changed Am I hitting the end of the tape, or something else? Here's my config: ahc0: <Adaptec 2940A Ultra SCSI adapter> rev 0x01 int a irq 9 on pci0.9.0 ahc0: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs ahc1: <Adaptec 2940 Pro Ultra SCSI adapter> rev 0x01 int a irq 10 on pci0.10.0 ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs Waiting 15 seconds for SCSI devices to settle sa0 at ahc0 bus 0 target 2 lun 0 sa0: <DEC DLT2000 15/30 GB 840B> Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 15) da0 at ahc1 bus 0 target 0 lun 0 da0: <SEAGATE ST446452W 0001> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 44884MB (91923356 512 byte sectors: 255H 63S/T 5721C) da2 at ahc1 bus 0 target 2 lun 0 da2: <SEAGATE ST446452W 0001> Fixed Direct Access SCSI-2 device da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da2: 44884MB (91923356 512 byte sectors: 255H 63S/T 5721C) da3 at ahc1 bus 0 target 3 lun 0 da3: <SEAGATE ST446452W 0001> Fixed Direct Access SCSI-2 device da3: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da3: 44884MB (91923356 512 byte sectors: 255H 63S/T 5721C) da1 at ahc1 bus 0 target 1 lun 0 da1: <SEAGATE ST446452W 0001> Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 44884MB (91923356 512 byte sectors: 255H 63S/T 5721C) da4 at ahc1 bus 0 target 4 lun 0 da4: <SEAGATE ST446452W 0001> Fixed Direct Access SCSI-2 device da4: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da4: 44884MB (91923356 512 byte sectors: 255H 63S/T 5721C) da6 at ahc1 bus 0 target 6 lun 0 da6: <SEAGATE ST446452W 0001> Fixed Direct Access SCSI-2 device da6: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da6: 44884MB (91923356 512 byte sectors: 255H 63S/T 5721C) da5 at ahc1 bus 0 target 5 lun 0 da5: <SEAGATE ST446452W 0001> Fixed Direct Access SCSI-2 device da5: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da5: 44884MB (91923356 512 byte sectors: 255H 63S/T 5721C) Kevin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200003072237.QAA93944>