Date: Tue, 27 May 1997 15:28:05 +0100 (BST) From: Richard Tobin <richard@cogsci.ed.ac.uk> To: Bernie Doehner <bad@uhf.wireless.net> Cc: multimedia@FreeBSD.ORG Subject: Re: Amancio's latest mods to bt848 driver (removal of floating point) Message-ID: <199705271428.PAA18281@stevenson.cogsci.ed.ac.uk> In-Reply-To: Bernie Doehner's message of Sun, 25 May 1997 15:03:59 -0400 (EDT)
next in thread | raw e-mail | index | archive | help
> > What do you have your PCI clock set to? > I must really be in the hardware "dark ages". No PCI clock setting or PCI > wait state setting on the Acer AP43 motherboard or its Ami WinBIOS. With a 40MHz cpu clock, you almost certainly can't run the PCI bus at 33MHz; I have one that gives a choice of 20MHz and 40MHz. Is there nothing on the board or the BIOS that selects between CPUCLOCK and CPUCLOCK/2 or something like that? Most likely it would work at 40MHz even though its out of spec. I suppose you could try configuring the board for a DX4-100, which would run the CPU slower but give you a 33MHz PCI bus. -- Richard
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199705271428.PAA18281>