Date: Mon, 24 Sep 2001 09:41:37 -0700 From: "Ted Mittelstaedt" <tedm@toybox.placo.com> To: "Jon-Erik Lido" <jlido@goof.com>, <freebsd-questions@FreeBSD.ORG> Subject: RE: SiS 900 ethernet MAC address all zeros (me too) Message-ID: <000301c14517$c73e5580$1401a8c0@tedm.placo.com> In-Reply-To: <20010924100034.A19845@goof.com>
next in thread | previous in thread | raw e-mail | index | archive | help
>-----Original Message----- >From: owner-freebsd-questions@FreeBSD.ORG >[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Jon-Erik Lido >Sent: Monday, September 24, 2001 7:01 AM >To: freebsd-questions@FreeBSD.ORG >Subject: Re: SiS 900 ethernet MAC address all zeros (me too) > > >On Sun, Sep 23, 2001 at 03:48:31PM -0400, Rami AlZaid wrote: >> On 09/23/01 03:28PM or some time around that time, Jon-Erik Lido wrote: >> > Back in December/Januare Oliver Crow mentioned a problem with his >> > onboard SiS 900 ethernet reporting a MAC address of all zeros. >> > >> > >> > How do I get this device to work? >> > >> >> I have a Linksys LNE100TX and I sometimes face the same problem >under DOS. I'm not sure if it's the same problem or not but turning >off the machine and turning it back on always helped solve the problem. >> >No, this does not solve the problem. > >-Jon > IS it possible that you have another card attempting to share IRQ 10? I've seen FreeBSD come up with MAC addresses of all zeros when the interrupt selected cannot be toggled by the driver. It's a problem with ISA cards that are set to different interrupts that their driver is set to use. Look in your BIOS settings and see if you can move the IRQ to something else. Ted Mittelstaedt tedm@toybox.placo.com Author of: The FreeBSD Corporate Networker's Guide Book website: http://www.freebsd-corp-net-guide.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000301c14517$c73e5580$1401a8c0>