From owner-freebsd-questions@FreeBSD.ORG Sat May 3 16:54:16 2014 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 89392C01 for ; Sat, 3 May 2014 16:54:16 +0000 (UTC) Received: from nm37.bullet.mail.ne1.yahoo.com (nm37.bullet.mail.ne1.yahoo.com [98.138.229.30]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id BB0FF1DC8 for ; Sat, 3 May 2014 16:54:15 +0000 (UTC) Received: from [127.0.0.1] by nm37.bullet.mail.ne1.yahoo.com with NNFMP; 03 May 2014 16:54:13 -0000 Received: from [98.138.226.176] by nm37.bullet.mail.ne1.yahoo.com with NNFMP; 03 May 2014 16:51:12 -0000 Received: from [98.139.212.153] by tm11.bullet.mail.ne1.yahoo.com with NNFMP; 03 May 2014 16:51:12 -0000 Received: from [98.139.212.206] by tm10.bullet.mail.bf1.yahoo.com with NNFMP; 03 May 2014 16:51:12 -0000 Received: from [127.0.0.1] by omp1015.mail.bf1.yahoo.com with NNFMP; 03 May 2014 16:51:12 -0000 X-Yahoo-Newman-Property: ymail-4 X-Yahoo-Newman-Id: 76366.32947.bm@omp1015.mail.bf1.yahoo.com Received: (qmail 44797 invoked by uid 60001); 3 May 2014 16:51:12 -0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoo.com; s=s1024; t=1399135872; bh=5W8Sl+Girlt0QI/WhUvwJELTdsn8wokoWcjGdWB02Kw=; h=Message-ID:Date:From:Reply-To:Subject:To:MIME-Version:Content-Type; b=p6I4aYEZ2xKYvypeTKRvjhXvoPEiBA79lsMxZKl0dbsP+wvyynoNu8gOikq4DzmvotTVQoKBmieeaMT4LxQg6EK4brNIJfAr+QY0NdquoVbYSptyPRjoCIGHiGvQE2mBOHOddxldqG9t5kIPNDLqFtclrHDAtqEtiUYEREGvKmk= X-YMail-OSG: F3IL3qAVM1mNw7GmeCI94mH2BoDOUGaafQGezVnyWdTWJ8q pioFcUFANxiaN7E9uOnXL0rP48OKhGjQYRq5UDgcBdt.oV0m_wfo9jZkumlH k29OLNwNbCiH0MwUjVs0a_nfci5sTF90JqNcrI_5BsUXYvrwoW5D8MEbred3 aYP845oXtn5nTmzUo29P5yy6Ts3QwacqhC5ycnKp5rcOjCN6efFAXCLb8AVM 2b2reJJ3y2NWKxLXhnXYG9tibOtCo7MYNWnBor7z.dzJ7FlP7AUEnK97fUdE UkWekjWk4_EmrdJnYjl7DV0rRfMDTuVL1q3qPgaaQBckLPxqXnmU9EKPYWiQ gzxqPXb8Zswra7mHazu9OPGK7coWxHtS42s0xnBdkmnyOmQsCtbk_uUrGnjz jMd74yQIbb7U2WgrQkndE04ry_W1igIWzaZ0Q2043jm515UFdu6976jhW4ov OSD2zW5DLNaSeUopjlPL8MIIfK65Wi7hcg6luFIaDILOEpYPB0bORA.k8UPo 32Ztx0Bj.mVWPsvqfbhPh.5G0Fi620C9H0CU51N.tKXUkZqxKb3nsTfAxj2a kInP8 Received: from [209.195.124.206] by web163101.mail.bf1.yahoo.com via HTTP; Sat, 03 May 2014 09:51:11 PDT X-Rocket-MIMEInfo: 002.001, R29vZCBkYXkgYWxsLgoKSSBoYXZlIGFuIG9sZCBtYWNoaW5lIGFuZCBJIHdhbnQgdG8gbWFrZSBpdCBpbnRvIGEgRnJlZUJTRCB3b3Jrc3RhdGlvbi4KSXQncyBhIHRyaXBsZSBjb3JlIEFNRMKgIFBoZW5vbSBvbiBhbiBFQ1MgYm9hcmQuCldoZW4gdGhlIEZyZWVCU0QgMTAgKHg4NikgaW5zdGFsbGVyIHJlYWNoZXMgdGhlIGRpc2sgcGFydGl0aW9uaW5nIHBhcnQsIGl0IGJhaWxzLiBBcHBhcmVudGx5IGl0IGNhbid0IGRldGVjdCB0aGUgU0FUQSAyIGhhcmQgZHJpdmUuCkkgdHJpZWQgcGxheWluZyB3aXRoIEIBMAEBAQE- X-Mailer: YahooMailWebService/0.8.188.663 Message-ID: <1399135871.14503.YahooMailNeo@web163101.mail.bf1.yahoo.com> Date: Sat, 3 May 2014 09:51:11 -0700 (PDT) From: Michael S Subject: FreeBSD installer can't detect SATA disk To: FreeBSD Mailing List MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.17 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list Reply-To: Michael S List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 May 2014 16:54:16 -0000 Good day all.=0A=0AI have an old machine and I want to make it into a FreeB= SD workstation.=0AIt's a triple core AMD=A0 Phenom on an ECS board.=0AWhen = the FreeBSD 10 (x86) installer reaches the disk partitioning part, it bails= . Apparently it can't detect the SATA 2 hard drive.=0AI tried playing with = BIOS, turning off APCI, and other options, no success=0A=0AOpenBSD installe= r finds the drive without issues.=0A=0APOST reports the drive as=0ASATA 2 S= T3250620AS 3AAk =0A=0AUltra DMA Mode-6 S.M.A.R.T Capable and Status OK.=0A= =0APlease let me know if anyone had a similar issue.=0A=0AThanks in advance= =0AMichael=0A=0Admesg output=0A=0A=0ACopyright (c) 1992-2014 The FreeBSD Pr= oject.=0ACopyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993= , 1994=0A=A0=A0=A0 The Regents of the University of California. All rights = reserved.=0AFreeBSD is a registered trademark of The FreeBSD Foundation.=0A= FreeBSD 10.0-RELEASE #0 r260789: Fri Jan 17 01:46:25 UTC 2014=0A=A0=A0=A0 r= oot@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386=0AFreeBSD clang vers= ion 3.3 (tags/RELEASE_33/final 183502) 20130610=0ACPU: AMD Phenom(tm) 8450e= Triple-Core Processor (2095.50-MHz 686-class CPU)=0A=A0 Origin =3D "Authen= ticAMD"=A0 Id =3D 0x100f23=A0 Family =3D 0x10=A0 Model =3D 0x2=A0 Stepping = =3D 3=0A=A0 Features=3D0x178bfbff=0A=A0 Feature= s2=3D0x802009=0A=A0 AMD Features=3D0xee500800=0A=A0 AMD Features2=3D0x7f= f=0A=A0 TSC: P-st= ate invariant=0Areal memory=A0 =3D 2684354560 (2560 MB)=0Aavail memory =3D = 2481143808 (2366 MB)=0AEvent timer "LAPIC" quality 400=0AACPI APIC Table: <= 081610 APIC1105>=0AFreeBSD/SMP: Multiprocessor System Detected: 3 CPUs=0AFr= eeBSD/SMP: 1 package(s) x 3 core(s)=0A=A0cpu0 (BSP): APIC ID:=A0 0=0A=A0cpu= 1 (AP): APIC ID:=A0 1=0A=A0cpu2 (AP): APIC ID:=A0 2=0Aioapic0 = irqs 0-23 on motherboard=0Akbd1 at kbdmux0=0Arandom: in= itialized=0Aacpi0: <081610 RSDT1105> on motherboard=0Aacpi0: Power Button (= fixed)=0Aacpi0: reservation of fee00000, 1000 (3) failed=0Aacpi0: reservati= on of ffb80000, 80000 (3) failed=0Aacpi0: reservation of fec10000, 20 (3) f= ailed=0Aacpi0: reservation of 0, a0000 (3) failed=0Aacpi0: reservation of 1= 00000, 97f00000 (3) failed=0Acpu0: on acpi0=0Acpu1: o= n acpi0=0Acpu2: on acpi0=0Aattimer0: port 0x40-0x43 i= rq 0 on acpi0=0ATimecounter "i8254" frequency 1193182 Hz quality 0=0AEvent = timer "i8254" frequency 1193182 Hz quality 100=0Aatrtc0: port 0x70-0x71 irq 8 on acpi0=0AEvent timer "RTC" frequency 32768 Hz qual= ity 0=0Ahpet0: iomem 0xfed00000-0xfed003ff on = acpi0=0ATimecounter "HPET" frequency 14318180 Hz quality 950=0AEvent timer = "HPET" frequency 14318180 Hz quality 550=0ATimecounter "ACPI-fast" frequenc= y 3579545 Hz quality 900=0Aacpi_timer0: <32-bit timer at 3.579545MHz> port = 0x808-0x80b on acpi0=0Apcib0: port 0xcf8-0xcff on ac= pi0=0Apci0: on pcib0=0Apcib1: at devic= e 1.0 on pci0=0Apci1: on pcib1=0Avgapci0: port 0xd000-0xd0ff mem 0xf0000000-0xf7ffffff,0xfeaf0000-0xfeafffff,0= xfe900000-0xfe9fffff irq 18 at device 5.0 on pci1=0Avgapci0: Boot video dev= ice=0Apcib2: at device 5.0 on pci0=0Apci2: on pcib2=0Are0: port 0xe800-0xe8ff m= em 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device 0.0 on pci2= =0Are0: Using 1 MSI-X message=0Are0: Chip rev. 0x24800000=0Are0: MAC rev. 0= x00400000=0Amiibus0: on re0=0Arlphy0: PHY 1 on miibus0=0Arlphy0:=A0 10baseT, 10baseT-FDX, 100baseTX, 100ba= seTX-FDX, auto, auto-flow=0Are0: Ethernet address: 44:87:fc:e3:cf:54=0Aahci= 0: port 0xc000-0xc007,0xb000-0xb003,0xa00= 0-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe8ff800-0xfe8ffbff irq 22 at de= vice 17.0 on pci0=0Aahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier s= upported=0Aahcich0: at channel 0 on ahci0=0Aahcich1: at channel 1 on ahci0=0Aahcich2: at channel 2 on ahc= i0=0Aahcich3: at channel 3 on ahci0=0Aohci0: mem 0xfe8fe000-0xfe8fefff irq 16 at device 18.0 on = pci0=0Ausbus0 on ohci0=0Aohci1: mem = 0xfe8fd000-0xfe8fdfff irq 16 at device 18.1 on pci0=0Ausbus1 on ohci1=0Aehc= i0: mem 0xfe8ff000-0xfe8ff0ff ir= q 17 at device 18.2 on pci0=0Aehci0: AMD SB600/700 quirk applied=0Ausbus2: = EHCI version 1.0=0Ausbus2 on ehci0=0Aohci2: mem 0xfe8fc000-0xfe8fcfff irq 18 at device 19.0 on pci0=0Ausbus3 on= ohci2=0Aohci3: mem 0xfe8fb000-0xfe8= fbfff irq 18 at device 19.1 on pci0=0Ausbus4 on ohci3=0Aehci1: mem 0xfe8fa800-0xfe8fa8ff irq 19 at device 1= 9.2 on pci0=0Aehci1: AMD SB600/700 quirk applied=0Ausbus5: EHCI version 1.0= =0Ausbus5 on ehci1=0Apci0: at device 20.0 (no driver at= tached)=0Aatapci0: port 0x1f0-0x1f7,0x3= f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0=0Aata0: at channel 0 on atapci0=0Aata1: at channel 1 on atapci0= =0Ahdac0: mem 0xfe8f4000-0xfe8f7fff irq 16 at de= vice 20.2 on pci0=0Aisab0: at device 20.3 on pci0=0Aisa0: = on isab0=0Apcib3: at device 20.4 on pci0=0A= pci3: on pcib3=0Aohci4: mem 0xfe8f9000-0xfe8f9fff irq 18 at device 20.5 on pci0=0Ausbus6 on ohci= 4=0Aacpi_button0: on acpi0=0Aacpi_tz0: on acp= i0=0Auart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi= 0=0Appc0: port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0= =0Appc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode=0Appc0: FIFO w= ith 16/16/16 bytes threshold=0Appbus0: on ppc0=0Alpt0: = on ppbus0=0Alpt0: Interrupt-driven port=0Appi0: on= ppbus0=0Apmtimer0 on isa0=0Aorm0: at iomem 0xc0000-0xcd7f= f pnpid ORM0000 on isa0=0Asc0: at flags 0x100 on isa0=0Asc= 0: VGA <16 virtual consoles, flags=3D0x300>=0Avga0: at po= rt 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0Aatkbdc0: at port 0x60,0x64 on isa0=0Aatkbd0: irq 1 on atkbd= c0=0Akbd0 at atkbd0=0Aatkbd0: [GIANT-LOCKED]=0Aacpi_throttle0: on cpu0=0Ahwpstate0: on cpu0=0ATimecounters ti= ck every 1.000 msec=0Ahdacc0: at cad 0 on = hdac0=0Ahdaa0: at nid 1 on hdac= c0=0Apcm0: at nid 13,10 and 11,2= 1,12 on hdaa0=0Apcm1: at nid 16 on hd= aa0=0Apcm2: at nid 15 on hdaa0= =0Arandom: unblocking device.=0Ausbus0: 12Mbps Full Speed USB v1.0=0Ausbus1= : 12Mbps Full Speed USB v1.0=0Ausbus2: 480Mbps High Speed USB v2.0=0Ausbus3= : 12Mbps Full Speed USB v1.0=0Ausbus4: 12Mbps Full Speed USB v1.0=0Ausbus5:= 480Mbps High Speed USB v2.0=0Ausbus6: 12Mbps Full Speed USB v1.0=0Augen6.1= : at usbus6=0Auhub0: on usbus6=0Augen5.1: at usbus5=0Auhub1: on usbus5=0Augen4.1: at usbus4=0Auhub2= : on usbus4=0Augen3.1= : at usbus3=0Auhub3: on usbus3=0Augen2.1: at usbus2=0Auhub4: on usbus2=0Augen1.1: at usbus1=0Auhub5= : on usbus1=0Augen0.1= : at usbus0=0Auhub6: on usbus0=0A(aprobe0:ahcich1:0:15:0): NOP. ACB: 00 00 00 00 00 00 00 = 00 00 00 00 00=0A(aprobe0:ahcich1:0:15:0): CAM status: Command timeout=0A(a= probe0:ahcich1:0:15:0): Error 5, Retries exhausted=0Auhub0: 2 ports with 2 = removable, self powered=0Auhub6: 3 ports with 3 removable, self powered=0Au= hub5: 3 ports with 3 removable, self powered=0Auhub3: 3 ports with 3 remova= ble, self powered=0Auhub2: 3 ports with 3 removable, self powered=0Auhub1: = 6 ports with 6 removable, self powered=0Auhub4: 6 ports with 6 removable, s= elf powered=0Augen2.2: at usbus2=0Augen0.2: = at usbus0=0Aukbd0: on usbus0=0Akbd2 at ukbd0=0Aahcich1: Timeout on s= lot 0 port 0=0Aahcich1: is 00000002 cs 00000000 ss 00000000 rs 00000001 tfd= 50 serr 00000000 cmd 00046017=0A(aprobe0:ahcich1:0:0:0): ATA_IDENTIFY. ACB= : ec 00 00 00 00 40 00 00 00 00 00 00=0A(aprobe0:ahcich1:0:0:0): CAM status= : Command timeout=0A(aprobe0:ahcich1:0:0:0): Error 5, Retry was blocked=0Ar= un_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config=0A= ahcich1: Timeout on slot 0 port 0=0Aahcich1: is 00000002 cs 00000000 ss 000= 00000 rs 00000001 tfd 50 serr 00000000 cmd 00046017=0A(aprobe0:ahcich1:0:0:= 0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00=0A(aprobe0:ahcic= h1:0:0:0): CAM status: Command timeout=0A(aprobe0:ahcich1:0:0:0): Error 5, = Retry was blocked=0ASMP: AP CPU #1 Launched!=0ASMP: AP CPU #2 Launched!=0AT= imecounter "TSC" frequency 2095495336 Hz quality 800=0Acd0 at ata1 bus 0 sc= bus5 target 0 lun 0=0Acd0: Removable CD-RO= M SCSI-0 device =0Acd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 655= 34bytes)=0Acd0: cd present [288875 x 2048 byte records]=0ATrying to mount r= oot from cd9660:/dev/iso9660/FREEBSD_INSTALL [ro]... From owner-freebsd-questions@FreeBSD.ORG Sat May 3 21:12:30 2014 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 64468940 for ; Sat, 3 May 2014 21:12:30 +0000 (UTC) Received: from relay.mailchannels.net (ar-005-i201.relay.mailchannels.net [162.253.144.83]) by mx1.freebsd.org (Postfix) with ESMTP id A0B211697 for ; Sat, 3 May 2014 21:12:28 +0000 (UTC) X-Sender-Id: _forwarded-from|107.201.34.133 Received: from mail-24.name-services.com (ip-10-227-128-69.us-west-2.compute.internal [10.227.128.69]) by relay.mailchannels.net (Postfix) with ESMTPA id E7E09600E4 for ; Sat, 3 May 2014 21:12:26 +0000 (UTC) X-Sender-Id: _forwarded-from|107.201.34.133 Received: from mail-24.name-services.com (mail-24.name-services.com [10.248.1.153]) (using TLSv1 with cipher AES128-SHA) by 0.0.0.0:2500 (trex/5.1.2); Sat, 03 May 2014 21:12:27 GMT X-MC-Relay: Forwarding X-MailChannels-SenderId: _forwarded-from%7C107.201.34.133 X-MailChannels-Auth-Id: demandmedia Received: from [10.0.10.1] (107-201-34-133.lightspeed.bcvloh.sbcglobal.net [107.201.34.133]) by mail-24.name-services.com with SMTP; Sat, 3 May 2014 14:12:19 -0700 Message-ID: <53655BB2.6010800@a1poweruser.com> Date: Sat, 03 May 2014 17:12:18 -0400 From: Fbsd8 User-Agent: Thunderbird 2.0.0.17 (Windows/20080914) MIME-Version: 1.0 To: questions Subject: rc.conf jails not working in 10.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 May 2014 21:12:30 -0000 My 9.2 rc.conf has a single jail defined. Copied those jail statements over to 10.0 rc.conf. The "service jail start jailname" commands issues some warning and the usage of the jail command. This used to work in 9.2 but don't work in 10.0. I thought 10.0 was suppose to work using the rc.conf or jail.conf method. Has rc.conf jail support been removed in 10.0?