Date: Tue, 6 May 2003 23:20:10 +0200 From: hans@lambermont.dyndns.org (Hans Lambermont) To: current@FreeBSD.org Subject: IBM T30 problems with fxp0, sound and acpi/mouse. Message-ID: <20030506212010.GB79054@moya.lambermont.dyndns.org>
next in thread | raw e-mail | index | archive | help
--ew6BAiZeqk4r7MaW Content-Type: text/plain; charset=us-ascii Content-Disposition: inline IBM T30 problems with fxp0, sound and acpi/mouse. I upgraded to 5.0 from -stable and am now trying to upgrade to -head. I'm testing with the GENERIC kernel and stumble into the following problems: Using fxp0 causes timeouts on -head (works fine on 5.0-RELEASE-p7). fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f mem 0xd0200000-0xd0200fff irq 11 at device 8.0 on pci2 fxp0: Ethernet address 00:09:6b:30:a2:45 miibus0: <MII bus> on fxp0 ... fxp0: device timeout These device timeouts render fxp0 useless. On 5.0-RELEASE-p7 fxp0 works fine, but there are some complaints in dmesg : module_register: module pci/if_fxp already exists! Module pci/if_fxp failed to register: 17 module_register: module cardbus/if_fxp already exists! Module cardbus/if_fxp failed to register: 17 module_register: module fxp/miibus already exists! Module fxp/miibus failed to register: 17 can't re-use a leaf (fxp_rnr)! Sound is not working anymore on both 5.0-RELEASE-p7 and -head (worked fine on 4.7-STABLE) Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc06c00a8. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc06c015c. ... pci0: <multimedia, audio> at device 31.5 (no driver attached) Enabling ACPI disables the mouse. Without ACPI the mouse works fine: psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 dmesg of 5.0-RELEASE-p7, -head as of now and 4.7-STABLE are attached. Any hints or suggestions are welcome. Hans Lambermont -- http://lambermont.webhop.org/ () ascii ribbon campaign - against HTML mail, /\ vCards and proprietary formats --ew6BAiZeqk4r7MaW Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.50" Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-RELEASE-p7 #0: Sat Apr 26 00:38:24 CEST 2003 root@gagh.intra.aramiska.net:/usr/obj/usr/src/sys/GAGH Preloaded elf kernel "/boot/kernel.50/kernel" at 0xc048b000. Preloaded elf module "/boot/kernel.50/snd_maestro3.ko" at 0xc048b0ac. Preloaded elf module "/boot/kernel.50/snd_pcm.ko" at 0xc048b160. Timecounter "i8254" frequency 1193182 Hz CPU: Pentium 4 (1794.19-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xffffffffbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,<b31>> real memory = 267780096 (255 MB) avail memory = 255197184 (243 MB) Initializing GEOMetry subsystem Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface Using $PIR table, 14 entries at 0xc00fdeb0 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 drm0: <ATI Radeon LW Mobility 7 (AGP)> port 0x3000-0x30ff mem 0xd0100000-0xd010ffff,0xe8000000-0xefffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xe0000000 64MB info: [drm] Initialized radeon 1.1.1 20010405 on minor 0 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 cbb0: <TI1520 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2 cbb0: Could not map register memory device_probe_and_attach: cbb0 attach returned 12 cbb0: <TI1520 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 11 at device 0.1 on pci2 cbb0: Could not map register memory device_probe_and_attach: cbb0 attach returned 12 fxp0: <Intel Pro/100 Ethernet> port 0x8000-0x803f mem 0xd0200000-0xd0200fff irq 11 at device 8.0 on pci2 fxp0: Ethernet address 00:09:6b:30:a2:45 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) pci0: <simple comms> at device 31.6 (no driver attached) orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0680> can't assign resources (port) unknown: <PNP0680> can't assign resources (port) unknown: <IBM0057> can't assign resources (irq) unknown: <PNP0501> can't assign resources (port) unknown: <IBM0071> can't assign resources (port) unknown: <PNP0400> can't assign resources (port) Timecounters tick every 10.000 msec ata1-slave: timeout waiting for interrupt ata1-slave: ATAPI identify failed ad0: 19077MB <IC25N020ATCS04-0> [41344/15/63] at ata0-master UDMA100 acd0: CD-RW <UJDA730 DVD/CDRW> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s3a module_register: module pci/if_fxp already exists! Module pci/if_fxp failed to register: 17 module_register: module cardbus/if_fxp already exists! Module cardbus/if_fxp failed to register: 17 module_register: module fxp/miibus already exists! Module fxp/miibus failed to register: 17 can't re-use a leaf (fxp_rnr)! cbb0: <TI1520 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2 cbb0: Could not map register memory device_probe_and_attach: cbb0 attach returned 12 cbb0: <TI1520 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 11 at device 0.1 on pci2 cbb0: Could not map register memory device_probe_and_attach: cbb0 attach returned 12 fire_saver: the console does not support M_VGA_CG320 module_register_init: MOD_LOAD (fire_saver, 0xc2676d20, 0) error 19 --ew6BAiZeqk4r7MaW Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.head" Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-BETA #4: Tue May 6 22:03:04 CEST 2003 hans@gagh.intra.aramiska.net:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc06c0000. Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc06c00a8. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc06c015c. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1794187804 Hz CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz (1794.19-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 267780096 (255 MB) avail memory = 252801024 (241 MB) Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 14 entries at 0xc00fdeb0 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 cbb0: <TI1520 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <TI1520 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 11 at device 0.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f mem 0xd0200000-0xd0200fff irq 11 at device 8.0 on pci2 fxp0: Ethernet address 00:09:6b:30:a2:45 miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) pci0: <simple comms> at device 31.6 (no driver attached) eisa0: <EISA bus> on motherboard eisa0: unknown card @@@0000 (0x00000000) at slot 1 orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0680> can't assign resources (port) unknown: <PNP0680> can't assign resources (port) unknown: <IBM0057> can't assign resources (irq) unknown: <PNP0501> can't assign resources (port) unknown: <IBM0071> can't assign resources (port) unknown: <PNP0400> can't assign resources (port) Timecounters tick every 10.000 msec cbb0: Unsupported card type detected ata1-slave: timeout waiting for interrupt ata1-slave: ATAPI identify failed ad0: 19077MB <IC25N020ATCS04-0> [41344/15/63] at ata0-master UDMA100 acd0: CD-RW <UJDA730 DVD/CDRW> at ata1-master PIO4 WARNING: Expected rawoffset 604800, found 0 WARNING: Expected rawoffset 17372880, found 0 WARNING: Expected rawoffset 34140960, found 0 Mounting root from ufs:/dev/ad0s3a fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fire_saver: the console does not support M_VGA_CG320 module_register_init: MOD_LOAD (fire_saver, 0xc26ccdd0, 0) error 19 fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout fxp0: device timeout --ew6BAiZeqk4r7MaW Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.47-STABLE" Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-STABLE #1: Thu Jan 9 13:37:20 CET 2003 hans@gagh.intra.aramiska.net:/usr/obj/usr/src/sys/GAGH Timecounter "i8254" frequency 1193182 Hz CPU: Pentium 4 (1794.19-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC,<b31>> real memory = 267780096 (261504K bytes) avail memory = 256573440 (250560K bytes) Preloaded elf kernel "kernel" at 0xc03ec000. Preloaded elf module "snd_maestro3.ko" at 0xc03ec09c. Preloaded elf module "snd_pcm.ko" at 0xc03ec140. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 14 entries at 0xc00fdeb0 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82845 Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI model 4c57 graphics accelerator> at 0.0 irq 11 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 pcic0: <TI PCI-1520 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2 pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq] pccard0: <PC Card 16-bit bus (classic)> on pcic0 pcic1: <TI PCI-1520 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 11 at device 0.1 on pci2 pcic1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq] pccard1: <PC Card 16-bit bus (classic)> on pcic1 fxp0: <Intel Pro/100 Ethernet> port 0x8000-0x803f mem 0xd0200000-0xd0200fff irq 11 at device 8.0 on pci2 fxp0: Ethernet address 00:09:6b:30:a2:45 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f irq 11 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus general purpose I/O> on smbus0 pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 11 at device 31.5 on pci0 pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11 orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe0000-0xeffff on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: cannot reserve I/O port range IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default ata1-slave: ATAPI identify retries exceeded ad0: 19077MB <IC25N020ATCS04-0> [41344/15/63] at ata0-master UDMA100 acd0: CD-RW <UJDA730 DVD/CDRW> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s3a --ew6BAiZeqk4r7MaW--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030506212010.GB79054>