Date: Sat, 19 Feb 2000 15:33:00 +0100 (CET) From: sebster@sebster.com (Sebastiaan van Erk) To: freebsd-questions@freebsd.org Subject: 4.0 kernel configuration Message-ID: <20000223084113.37A711931F@eeyore.sebster.com>
next in thread | raw e-mail | index | archive | help
--ELM950970780-447-0_
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Hi all,
I'm running 4.0-20000208-CURRENT at the moment and I have some problems
when the kernel boots. The first problem is as follows, whenever I get
to the line:
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX4 ATA-33 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0 at 0x01f0 irq 14 on ata-pci0
it waites for about 10 to 20 seconds before continuing here:
pci0: Intel 82371AB/EB (PIIX4) USB controller (vendor=0x8086, dev=0x7112) at 4.2 irq 9
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
I don't know whether it's the USB controller or the ata0 controller which is
causing the delay, but I'd like to get rid of it :-)
Secondly, I get the following warnings:
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1200-KB 5.25" drive> on fdc0 drive 1
WARNING: "fd" is usurping "fd"'s cdevsw[]
WARNING: "fd" is usurping "fd"'s bmaj
Why do I get these, and how do I get rid of them?
Finally, I get a message saying:
unknown0: <Rockwell 56K ACF II Fax+Data+Voice Modem> at port 0x3e8-0x3ef irq 10 on isa0
But I want this to be detected as a sio3 so that I can use it like I used to.
Lastly, I've been getting kernel warnings of the form: stray irq 7.
Anybody have any suggestions on how to tackle any of these problems?
Any help would be greatly appreciated. I attached the dmesg and the kernel
config file.
Greetings
Sebastiaan van Erk
--ELM950970780-447-0_
Content-Type: text/plain; charset=ISO-8859-1
Content-Disposition: attachment; filename=EEYORE
Content-Description: EEYORE
Content-Transfer-Encoding: 7bit
###############################################################################
# GENERAL OPTIONS
ident EEYORE # Kernel identification
machine i386 # IBM-PC compatible architecture
cpu I686_CPU # Intel Pentium II Processor
options INCLUDE_CONFIG_FILE # Include config file in kernel
###############################################################################
# BOOT OPTIONS
options USERCONFIG # Enable boot -c editor
###############################################################################
# STATIC SIZING OPTIONS
maxusers 32 # Static sizing of tables in param.c
###############################################################################
# SMP OPTIONS
options SMP # Enable Symmetric MultiProcessing
options APIC_IO # Symmetric I/O
options NCPU=2 # Two processors
###############################################################################
# COMPATIBILITY OPTIONS
options COMPAT_43 # Compatibility with BSD4.3
options SYSVSHM # System V shared memory support
options SYSVSEM # System V semaphore support
options SYSVMSG # System V message support
options MD5 # MD5 routine in kernel
options P1003_1B # Posix realtime scheduling
options _KPOSIX_PRIORITY_SCHEDULING # Posix priority scheduling
###############################################################################
# DEBUGGING OPTIONS
options KTRACE # Enable kernel tracing
###############################################################################
# FILE SYSTEM OPTIONS
options FFS # Berkeley fast filesystem
options MFS # Memory filesystem
options NFS # Network filesystem
options CD9660 # ISO 9660 filesystem
options MSDOSFS # MS-DOS filesystem
options NTFS # NT filesystem
options FFS_ROOT # FFS usable as root device
options QUOTA # Enable disk quotas
options PROCFS # Process filesystem
options KERNFS # Kernel filesystem
options FDESC # File descriptor filesystem
###############################################################################
# NETWORKING OPTIONS
options INET # Internet networking enabled
pseudo-device loop # Network loopback support
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Serial Line IP (SLIP) device
pseudo-device ppp 1 # Point-to-Point Protocol (PPP) device
pseudo-device tun 2 # IP tunneling devices
pseudo-device disc # Discard device
pseudo-device pty # Pseudo ttys
pseudo-device bpf 4 # Berkeley Packet Filter devices
pseudo-device snp 2 # Snoop devices
options PPP_BSDCOMP # PPP BSD-compress support
options PPP_DEFLATE # PPP zlib/deflate/gzip support
options PPP_FILTER # PPP bpfilter support
options IPFIREWALL # Enable firewall
options IPFIREWALL_VERBOSE # Log information on dropped packets
options IPDIVERT # Divert sockets
options IPFILTER # Enable packet filtering
options IPFILTER_LOG # Log filtered packets
options TCP_RESTRICT_RST # Restrict emmission of TCP RST
options ICMP_BANDLIM # Rate limit bad replies
###############################################################################
# HARDWARE DEVICE CONFIGURATION
device isa # ISA device
device pci # PCI device
device ahc # Adaptec 2940 U2W
options AHC_ALLOW_MEMIO # Allow memory mapped I/O
device scbus0 # SCSI-device
options SCSI_DELAY=12000 # Delay (ms) before SCSI bus is probed
device da # Direct Access (disk)
device sa # Sequential Access (tape)
device cd # CD-ROM
device pass # Passthrough (direct SCSI access)
device fdc0 at isa? port "IO_FD1" irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
device ata # ATA/ATAPI devices
device atadisk # ATA disks
device atapicd # ATAPI CD-ROM drives
device atapifd # ATAPI floppy drives
options ATA_STATIC_ID # Static device numbering
options ATA_ENABLE_ATAPI_DMA # Enable DMA on ATAPI devices
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa?
options VESA
device sc0 at isa? # System Console driver
options SC_DISABLE_REBOOT # Disable Ctrl-Alt-Del sequence
options SC_DISABLE_DDBKEY # Disable Alt-Esc kernel debugging
pseudo-device splash # Splash screen saver
options XSERVER # Support for X server
options UCONSOLE # Allow users to grab the console
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio3 at isa? port IO_COM4 irq 11
device ppc0 at isa? irq 7
device ppbus # Parallel Port bus
device lpt # Printer
device plip # Parallel Line IP
device ppi # Parallel Port Interface device
device npx0 at nexus? port IO_NPX irq 13
device miibus
device ed
device xl
device pcm0
###############################################################################
# MISCELLANEOUS DEVICES
pseudo-device speaker # PC speaker
pseudo-device vn 4 # Vnode drivers (file to device)
###############################################################################
--ELM950970780-447-0_
Content-Type: text/plain; charset=ISO-8859-1
Content-Disposition: attachment; filename=dmesg
Content-Description: dmesg
Content-Transfer-Encoding: 7bit
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-20000208-CURRENT #5: Mon Feb 14 16:31:10 CET 2000
root@eeyore.sebster.com:/usr/src/sys/compile/EEYORE
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268423168 (262132K bytes)
avail memory = 256942080 (250920K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 5
IOAPIC #0 intpin 19 -> irq 9
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc035a000.
VESA: v2.0, 8192k memory, flags:0x1, mode table:0xc02fbb62 (1000022)
VESA: Matrox Graphics Inc.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <Matrox MGA G200 AGP graphics accelerator> mem 0xe1800000-0xe1ffffff,0xe2000000-0xe2003fff,0xe3000000-0xe3ffffff irq 5 at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX4 ATA-33 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0 at 0x01f0 irq 14 on ata-pci0
pci0: Intel 82371AB/EB (PIIX4) USB controller (vendor=0x8086, dev=0x7112) at 4.2 irq 9
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xd000-0xd0ff mem 0xe1000000-0xe1000fff irq 9 at device 6.0 on pci0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
pcm0: <AudioPCI ES1370> port 0xb800-0xb83f irq 9 at device 9.0 on pci0
xl0: <3Com 3c900B-TPO Etherlink XL> port 0xb400-0xb47f mem 0xe0800000-0xe080007f irq 5 at device 12.0 on pci0
xl0: Ethernet address: 00:50:04:48:17:dc
xl0: selecting 10baseT transceiver, half duplex
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1200-KB 5.25" drive> on fdc0 drive 1
WARNING: "fd" is usurping "fd"'s cdevsw[]
WARNING: "fd" is usurping "fd"'s bmaj
ata-isa0: already registered as ata0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio3: configured irq 11 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
unknown0: <Rockwell 56K ACF II Fax+Data+Voice Modem> at port 0x3e8-0x3ef irq 10 on isa0
ed0: <PLUG & PLAY ETHERNET CARD> at port 0x240-0x25f iomem 0xc0000-0xc003f irq 11 on isa0
ed0: address 00:00:b4:82:fa:1a, type NE2000 (16 bit)
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, unlimited logging
IP Filter: initialized. Default = pass all, Logging = enabled
IP Filter: v3.3.6
Waiting 12 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
ad0: 14664MB <IBM-DJNA-351520> [29795/16/63] at ata0-master using UDMA33
Mounting root from ufs:/dev/da0s1a
cd0 at ahc0 bus 0 target 0 lun 0
cd0: <PHILIPS CDD3600 CD-R/RW 2.00> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: cd present [1 x 2048 byte records]
da0 at ahc0 bus 0 target 4 lun 0
da0: <IBM DDRS-39130D DC1B> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
--ELM950970780-447-0_--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000223084113.37A711931F>