Date: Sun, 10 Mar 2013 09:40:34 +0100 From: Mats Mellstrand <mats@exmandato.se> To: Tim Kientzle <tim@kientzle.com> Cc: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: RPi booting problem Message-ID: <0C96F8AF-4876-4FA2-8473-8A0A36422883@exmandato.se> In-Reply-To: <DD5BC4B0-CCC8-4926-9B4F-C10E61E60392@kientzle.com> References: <C0231594-5B2C-4192-84EE-9CF40C1584B6@exmandato.se> <DD5BC4B0-CCC8-4926-9B4F-C10E61E60392@kientzle.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 10 mar 2013, at 03:45, Tim Kientzle <tim@kientzle.com> wrote: >=20 > On Mar 9, 2013, at 6:29 AM, Mats Mellstrand wrote: >=20 >> Hi >>=20 >> I have checked out the latest from head and built world and kernel = (conf/RPI-B) and finally created and image that I written to a flash. >> I have used freebsd-uboot-20130201.tar.gz=20 >>=20 >> When I try to boot, the uboot goes in to a cyclic restart... >>=20 >> U-Boot 2013.01-rc1-g6709570-dirty (Nov 30 2012 - 19:09:28) >>=20 >> DRAM: 448 MiB >> WARNING: Caches not enabled >> MMC: bcm2835_sdhci: 0 >> Using default environment >>=20 >> In: serial >> Out: lcd >> Err: lcd >> bcm2835: USB power in ON >> Net: Net Initialization Skipped >> No ethernet found. >> Hit any key to stop autoboot: 0=20 >> reading uEnv.txt >> reading boot.scr >> 137 bytes read in 9023 ms (0 Bytes/s) >> Running bootscript from mmc0 ... >> ## Executing script at 00200000 >> reading ubldr >> 238023 bytes read in 60497 ms (2.9 KiB/s) >> ## Starting application at 0x02000054 ... >>=20 >>=20 >> U-Boot 2013.01-rc1-g6709570-dirty (Nov 30 2012 - 19:09:28) >>=20 >> over and over =85. >=20 > Seems like your ubldr is broken. Yes, that was the problem. Thank's! Now, what compiler flags should I use to build the ubldr? I have rebuilt ubldr many times. >=20 > Try copying ubldr from another image somewhere and > see if that fixes it. >=20 > Here's a description of the RPi boot process for FreeBSD: >=20 > = https://github.com/kientzle/freebsd-beaglebone/tree/master/board/Raspberry= Pi/boot >=20 > The directory above that has a higher-level description of > how FreeBSD works on RaspberryPi: >=20 > = https://github.com/kientzle/freebsd-beaglebone/tree/master/board/Raspberry= Pi >=20 > Tim >=20 >=20 /mm
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0C96F8AF-4876-4FA2-8473-8A0A36422883>