From owner-freebsd-bugs Mon Sep 11 6:10:26 2000 Delivered-To: freebsd-bugs@freebsd.org Received: from hotmail.com (f5.law9.hotmail.com [64.4.9.5]) by hub.freebsd.org (Postfix) with ESMTP id 9D9F937B422 for ; Mon, 11 Sep 2000 06:10:21 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Mon, 11 Sep 2000 06:10:21 -0700 Received: from 203.148.243.57 by lw9fd.law9.hotmail.msn.com with HTTP; Mon, 11 Sep 2000 13:10:20 GMT X-Originating-IP: [203.148.243.57] From: "sakditorn sentong" To: freebsd-bugs@FreeBSD.ORG Date: Mon, 11 Sep 2000 20:10:20 ICT Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 11 Sep 2000 13:10:21.0182 (UTC) FILETIME=[A393E1E0:01C01BF1] Sender: owner-freebsd-bugs@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I've sent the e-mail about my problem of running 2 freebsd servers on the same network about a month ago. I can't figure it out yet. So, I desperately need your help. I already have one freebsd server running affectively. Since I tried to up a second freebsd server. After the installation has been done. I used the command ping to ping each other but I got the messages "ping: send to: Host is down" back from them. However, when I used the command ping on both server to ping another IPs on the network, it worked perfectly. I have enclosed the output of "ifconfig -a" and "netstat -rn" for your attention. :output of "netstat -rn" Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 10.0.2.9 UGSc 36 2590565 fxp0 10.0.2/24 link#1 UC 0 0 fxp0 10.0.2.1 0:b4:c0:91:d2:9c UHLW 2 2654 lo0 10.0.2.2 0:8:c7:33:3e:2f UHLW 0 8361 fxp0 870 10.0.2.5 8:0:2b:86:e8:1d UHLW 1 57 fxp0 1195 10.0.2.7 0:50:ba:85:2e:9d UHLW 0 76 fxp0 1039 10.0.2.9 0:b0:c2:89:41:26 UHLW 35 0 fxp0 860 10.0.2.12 8:0:37:6:4a:a UHLW 1 26 fxp0 91 10.0.2.25 0:20:af:41:ad:94 UHLW 1 219 fxp0 763 10.0.2.41 0:d0:b7:7e:aa:c0 UHLW 0 190 fxp0 1183 10.0.2.43 0:d0:b7:9f:33:86 UHLW 0 68 fxp0 1114 10.0.2.62 0:0:86:41:de:5b UHLW 0 2196 fxp0 1147 10.0.2.64 0:50:ba:83:2d:7c UHLW 1 220 fxp0 812 10.0.2.71 0:d0:b7:9f:32:c6 UHLW 1 2916 fxp0 979 10.0.2.73 0:d0:b7:9f:33:8f UHLW 1 49111 fxp0 729 10.0.2.74 0:d0:b7:9f:36:d2 UHLW 0 299 fxp0 906 10.0.2.75 0:d0:b7:9f:35:a6 UHLW 1 252 fxp0 1146 10.0.2.88 0:50:ba:84:67:cf UHLW 1 2617 fxp0 1114 10.0.2.100 0:e0:18:18:62:14 UHLW 0 17 fxp0 683 127.0.0.1 127.0.0.1 UH 0 79 lo0 :output of ifconfig -a fxp0: flags=8843 mtu 1500 inet 10.0.2.1 netmask 0xffffff00 broadcast 10.0.2.255 ether 00:b4:c0:91:d2:9c media: manual supported media: manual lp0: flags=8810 mtu 1500 tun0: flags=8010 mtu 1500 sl0: flags=c010 mtu 552 ppp0: flags=8010 mtu 1500 lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xff000000 the following is output from the second server :output of "netstat -rn" Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 10.0.2.9 UGSc 1 139 fxp0 10.0.2/24 link#1 UC 0 0 fxp0 10.0.2.1 link#1 UHRLW 0 12 fxp0 10.0.2.5 8:0:2b:86:e8:1d UHLW 0 3 fxp0 1192 10.0.2.8 0:b4:c0:91:d2:9c UHLW 0 72 lo0 10.0.2.9 0:b0:c2:89:41:26 UHLW 1 0 fxp0 1044 10.0.2.71 0:d0:b7:9f:32:c6 UHLW 0 4 fxp0 1156 10.0.2.74 0:d0:b7:9f:36:d2 UHLW 0 5 fxp0 1050 127.0.0.1 127.0.0.1 UH 1 26 lo0 :output of "ifconfig -a" ifconfig -a fxp0: flags=8843 mtu 1500 inet 10.0.2.8 netmask 0xffffff00 broadcast 10.0.2.255 ether 00:b4:c0:91:d2:9c media: manual supported media: manual lp0: flags=8810 mtu 1500 tun0: flags=8010 mtu 1500 sl0: flags=c010 mtu 552 ppp0: flags=8010 mtu 1500 lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xff000000 I also have attached the content of "rc.conf" of 2nd server for your attention. ############################################################## ### Important initial Boot-time options ##################### ############################################################## swapfile="NO" # Set to name of swapfile if aux swapfile desired. apm_enable="NO" # Set to YES if you want APM enabled. pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic scri pt dirs ############################################################## ### Network configuration sub-section ###################### ############################################################## ### Basic network options: ### hostname="gundam.popidols.net" # Set this! nisdomainname="NO" # Set to NIS domain if using NIS (or NO). firewall_enable="NO" # Set to YES to enable firewall functionality firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) firewall_quiet="NO" # Set to YES to suppress rule display natd_enable="NO" # Enable natd (if firewall_enable == YES). natd_interface="fxp0" # Public interface to use with natd. natd_flags="" # Additional flags for natd. tcp_extensions="NO" # Disallow RFC1323 extensions (or YES). firewall_quiet="NO" # Set to YES to suppress rule display natd_enable="NO" # Enable natd (if firewall_enable == YES). natd_interface="fxp0" # Public interface to use with natd. natd_flags="" # Additional flags for natd. tcp_extensions="NO" # Disallow RFC1323 extensions (or YES). pback)._interfaces="fxp0 lp0 lo0" # List of network interfaces (lo0 is loo ifconfig_lp0="inet 10.0.2.8 netmask 255.255.255.0" ifconfig_fxp0="inet 10.0.2.8 netmask 255.255.255.0" ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. ### Network daemon (miscellaneous) & NFS options: ### syslogd_enable="YES" # Run syslog daemon (or NO). syslogd_flags="" # Flags to syslogd (if enabled). inetd_enable="YES" # Run the network daemon dispatcher (or NO). inetd_flags="" # Optional flags to inetd. named_enable="NO" # Run named, the DNS server (or NO). named_program="named" # path to named, if you want a different one. kadmind_server_enable="NO" # a slave kerberos serverdo not run on kerberos_stash="" # Is the kerberos master key stashed? rwhod_enable="NO" # Run the rwho daemon (or NO). amd_enable="NO" # Run amd service with $amd_flags (or NO). amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map" amd_map_program="NO" # Can be set to "ypcat -k amd.master" nfs_client_enable="YES" # This host is an NFS client (or NO). nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). nfs_server_enable="YES" # This host is an NFS server (or NO). nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). mountd_flags="-r" # Flags to mountd (if NFS server enabled). nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). portmap_enable="YES" # Run the portmapper service (or NO). portmap_flags="" # Flags to portmap (if enabled). rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). keyserv_flags="" # Flags to keyserv (if enabled). rarpd_enable="NO" # Run rarpd (or NO). rarpd_flags="" # Flags to rarpd. xtend_enable="NO" # Run the X-10 power controller daemon. xtend_flags="" # Flags to xtend (if enabled). ### Network Time Services options: ### timed_enable="NO" # Run the time daemon (or NO). timed_flags="" # Flags to timed (if enabled). ntpdate_enable="NO" # Run the ntpdate to sync time (or NO). ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. ntpdate_flags="" # Flags to ntpdate (if enabled). xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO). xntpd_program="xntpd" # path to xntpd, if you want a different one. xntpd_flags="-p /var/run/xntpd.pid" # Flags to xntpd (if enabled). # Network Information Services (NIS) options: ### nis_client_enable="NO" # We're an NIS client (or NO). nis_client_flags="" # Flags to ypbind (if enabled). nis_ypset_enable="NO" # Run ypset at boot time (or NO). nis_ypset_flags="" # Flags to ypset (if enabled). nis_server_enable="NO" # We're an NIS server (or NO). nis_server_flags="" # Flags to ypserv (if enabled). nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). ### Network routing options: ### defaultrouter="10.0.2.9" # Set to default gateway (or NO). static_routes="" # Set to static route list (or leave empty). I'm looking forward to hearing from you. Thank you very much. sakditorn. _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message