From owner-freebsd-questions Thu Oct 31 07:38:37 1996 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id HAA15368 for questions-outgoing; Thu, 31 Oct 1996 07:38:37 -0800 (PST) Received: from romulus.tcada.state.tx.us (romulus.tcada.state.tx.us [204.65.184.3]) by freefall.freebsd.org (8.7.5/8.7.3) with ESMTP id HAA15361 for ; Thu, 31 Oct 1996 07:38:33 -0800 (PST) Received: from [204.65.184.253] (253.tcada.state.tx.us [204.65.184.253]) by romulus.tcada.state.tx.us (8.7.5/8.6.4) with SMTP id JAA02020 for ; Thu, 31 Oct 1996 09:38:10 -0600 (CST) X-Sender: bill@romulus.tcada.state.tx.us Message-Id: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Thu, 31 Oct 1996 21:40:31 -0500 To: freebsd-questions@freebsd.org From: bill@tcada.state.tx.us (Bill Douglass) Subject: Integrated ethernet on Compaq Deskpro 6000 Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I am trying to install FreeBSD (either 2.1.5R or 2.2-SNAP 101496) onto a Compaq Deskpro 6000, Adaptec Ultra SCSI 2940, integrated ethernet. This is a machine I am setting up for web service, so X11 is not an issue. I cannot get the boot floppies to recognize the on-board ethernet card (Netflex-3/P, PCI). Searching through the mailing-list archive led me to think I needed the Lnce driver (lnc0) so I set that up, using the config. that Win95 gave for the device's settings . No dice. The probes recognized the device as a Compaq network device, but has no driver installed - pci0:11: Compaq, device=0xae35, class=network (misc) int a irq 11 [no driver assigned] I appreciate any tips from those who have worked with the model. Thanks greatly. -- Bill Douglass, bill@tcada.state.tx.us (512) 349-6734 Network Administrator, Texas Commission on Alcohol & Drug Abuse "I dreamed I was to take a test, in a Dairy Queen, on another planet." L. Anderson