Date: Thu, 24 Jun 1999 18:12:17 +0100 From: Piete Brooks <Piete.Brooks@cl.cam.ac.uk> To: aic7xxx@freebsd.org Cc: Piete.Brooks@cl.cam.ac.uk Subject: Help tuning an Adaptec 7896. Message-ID: <E10xD2y-00005h-00@chatteris.cl.cam.ac.uk>
next in thread | raw e-mail | index | archive | help
Exec Summary: How can I get more than 11MB from an Adaptec 7896 ?
Gory Details:
I have 9 GigaByte GA-6BXDU motherboards which have onboard "Adaptec 7896 Dual
Channel Ultra 2 SCSI", connected to a JBoD with 24 LVD 18GB disks, which
appear to only manage 11MB/s,
It looks as if the problem is that the period is set to 43 on the controller.
Using the same discs and cables on a AIC-7881U and a Adaptec 2940U2, I get
20MB/s and 80MB/s respectively (5 disc RAID0 manages over 60MB/s under hdparm)
so it does seem to point at the 7896.
The Adaptec BIOS has all IDs set at 80MB/s
Any ideas what is wrong ?
Any ideas how I can "over ride" the period of "43" ?
Some config data follows ...
=========================================================================
Linux neots.cl.cam.ac.uk 2.2.7 #1 SMP Thu Apr 29 06:51:35 BST 1999 i686 unknown
Red Hat Linux release 5.2 (Apollo)
=========================================================================
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
Flags: bus master, medium devsel, latency 64
Memory at e0000000 (32-bit, prefetchable)
Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03)
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: e6000000-e6ffffff
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80)
Flags: bus master, medium devsel, latency 64
I/O ports at f000
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at d000
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Flags: medium devsel
00:08.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 64)
Subsystem: Unknown device 10b7:9055
Flags: bus master, medium devsel, latency 64, IRQ 16
I/O ports at d400
Memory at eb003000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
00:09.0 SCSI storage controller: Adaptec AIC-7881U (rev 01)
Subsystem: Unknown device 9004:7881
Flags: bus master, medium devsel, latency 64, IRQ 17
I/O ports at d800
Memory at eb001000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
00:0a.0 SCSI storage controller: Adaptec 2940U2
Subsystem: Unknown device 9005:a180
Flags: bus master, medium devsel, latency 64, IRQ 18
BIST result: 00
I/O ports at dc00
Memory at eb000000 (64-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
00:0c.0 SCSI storage controller: Adaptec 7896
Subsystem: Unknown device 9005:080f
Flags: bus master, medium devsel, latency 64, IRQ 16
BIST result: 00
I/O ports at e000
Memory at eb002000 (64-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
00:0c.1 SCSI storage controller: Adaptec 7896
Subsystem: Unknown device 9005:080f
Flags: bus master, medium devsel, latency 64, IRQ 16
BIST result: 00
I/O ports at e400
Memory at eb004000 (64-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
01:00.0 VGA compatible controller: ATI Technologies Inc 215GB [Mach64 GB] (rev 5c)
Subsystem: Unknown device 1002:0080
Flags: bus master, stepping, medium devsel, latency 64, IRQ 16
Memory at e6000000 (32-bit, prefetchable)
I/O ports at c000
Memory at e5000000 (32-bit, non-prefetchable)
Capabilities: [50] AGP version 1.0
=========================================================================
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST118202LC Rev: 0006
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: SEAGATE Model: ST118202LC Rev: 0006
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: SEAGATE Model: ST118202LC Rev: 0006
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: SEAGATE Model: ST118202LC Rev: 0006
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: SEAGATE Model: ST118202LC Rev: 0006
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: SEAGATE Model: ST118202LC Rev: 0006
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 03 Lun: 00
Vendor: SEAGATE Model: ST118202LC Rev: 0006
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 03 Lun: 00
Vendor: SEAGATE Model: ST118202LC Rev: 0006
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST118202LC Rev: 0006
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi3 Channel: 00 Id: 12 Lun: 00
Vendor: TRIMM Model: GEM312V2 DR0-11 Rev: 4.1b
Type: Processor ANSI SCSI revision: 02
Host: scsi3 Channel: 00 Id: 13 Lun: 00
Vendor: TRIMM Model: GEM312V2 DR12-23 Rev: 4.1b
Type: Processor ANSI SCSI revision: 02
=========================================================================
Adaptec AIC7xxx driver version: 5.1.10/3.2.4
Compile Options:
AIC7XXX_RESET_DELAY : 5
AIC7XXX_TAGGED_QUEUEING: Adapter Support Enabled
Check below to see which
devices use tagged queueing
AIC7XXX_PAGE_ENABLE : Enabled (This is no longer an option)
AIC7XXX_PROC_STATS : Enabled
Adapter Configuration:
SCSI Adapter: Adaptec AHA-294X Ultra2 SCSI host adapter
Ultra2-LVD/SE Wide Controller
PCI MMAPed I/O Base: 0xeb000000
Adapter SEEPROM Config: SEEPROM found and used.
Adaptec SCSI BIOS: Enabled
IRQ: 18
SCBs: Active 0, Max Active 1,
Allocated 30, HW 32, Page 255
Interrupts: 2827
BIOS Control Word: 0x18a6
Adapter Control Word: 0x1c5d
Extended Translation: Enabled
Disconnect Enable Flags: 0xffff
Ultra Enable Flags: 0x0000
Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 24
Tagged Queue By Device array for aic7xxx host instance 0:
{255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
Actual queue depth per device for aic7xxx host instance 0:
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
Statistics:
(scsi0:0:0:0)
Device using Wide/Sync transfers at 80.0 MByte/sec, offset 15
Transinfo settings: current(10/15/1), goal(10/127/1), user(10/127/1)
Total transfers 13 (13 reads and 0 writes)
< 2K 2K+ 4K+ 8K+ 16K+ 32K+ 64K+ 128K+
Reads: 1 7 0 5 0 0 0 0
Writes: 0 0 0 0 0 0 0 0
(scsi0:0:1:0)
Device using Wide/Sync transfers at 80.0 MByte/sec, offset 15
Transinfo settings: current(10/15/1), goal(10/127/1), user(10/127/1)
Total transfers 1 (1 reads and 0 writes)
< 2K 2K+ 4K+ 8K+ 16K+ 32K+ 64K+ 128K+
Reads: 1 0 0 0 0 0 0 0
Writes: 0 0 0 0 0 0 0 0
(scsi0:0:2:0)
Device using Wide/Sync transfers at 80.0 MByte/sec, offset 15
Transinfo settings: current(10/15/1), goal(10/127/1), user(10/127/1)
Total transfers 18 (17 reads and 1 writes)
< 2K 2K+ 4K+ 8K+ 16K+ 32K+ 64K+ 128K+
Reads: 1 8 0 8 0 0 0 0
Writes: 0 0 0 1 0 0 0 0
(scsi0:0:3:0)
Device using Wide/Sync transfers at 80.0 MByte/sec, offset 15
Transinfo settings: current(10/15/1), goal(10/127/1), user(10/127/1)
Total transfers 1 (1 reads and 0 writes)
< 2K 2K+ 4K+ 8K+ 16K+ 32K+ 64K+ 128K+
Reads: 1 0 0 0 0 0 0 0
Writes: 0 0 0 0 0 0 0 0
(scsi0:0:4:0)
Device using Wide/Sync transfers at 80.0 MByte/sec, offset 15
Transinfo settings: current(10/15/1), goal(10/127/1), user(10/127/1)
Total transfers 1 (1 reads and 0 writes)
< 2K 2K+ 4K+ 8K+ 16K+ 32K+ 64K+ 128K+
Reads: 1 0 0 0 0 0 0 0
Writes: 0 0 0 0 0 0 0 0
(scsi0:0:5:0)
Device using Wide/Sync transfers at 80.0 MByte/sec, offset 15
Transinfo settings: current(10/15/1), goal(10/127/1), user(10/127/1)
Total transfers 5 (5 reads and 0 writes)
< 2K 2K+ 4K+ 8K+ 16K+ 32K+ 64K+ 128K+
Reads: 1 2 0 2 0 0 0 0
Writes: 0 0 0 0 0 0 0 0
=========================================================================
Adaptec AIC7xxx driver version: 5.1.10/3.2.4
Compile Options:
AIC7XXX_RESET_DELAY : 5
AIC7XXX_TAGGED_QUEUEING: Adapter Support Enabled
Check below to see which
devices use tagged queueing
AIC7XXX_PAGE_ENABLE : Enabled (This is no longer an option)
AIC7XXX_PROC_STATS : Enabled
Adapter Configuration:
SCSI Adapter: Adaptec AIC-7896/7 Ultra2 SCSI host adapter
Ultra2-LVD/SE Wide Controller Channel A
PCI MMAPed I/O Base: 0xeb002000
Adapter SEEPROM Config: SEEPROM found and used.
Adaptec SCSI BIOS: Enabled
IRQ: 16
SCBs: Active 0, Max Active 1,
Allocated 15, HW 32, Page 255
Interrupts: 74
BIOS Control Word: 0x18a6
Adapter Control Word: 0x1c5a
Extended Translation: Enabled
Disconnect Enable Flags: 0xffff
Ultra Enable Flags: 0x0000
Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 24
Tagged Queue By Device array for aic7xxx host instance 1:
{255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
Actual queue depth per device for aic7xxx host instance 1:
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
Statistics:
(scsi1:0:3:0)
Device using Wide/Sync transfers at 11.4 MByte/sec, offset 15
Transinfo settings: current(43/15/1), goal(43/127/1), user(43/127/1)
Total transfers 5 (5 reads and 0 writes)
< 2K 2K+ 4K+ 8K+ 16K+ 32K+ 64K+ 128K+
Reads: 1 3 0 1 0 0 0 0
Writes: 0 0 0 0 0 0 0 0
=========================================================================
Adaptec AIC7xxx driver version: 5.1.10/3.2.4
Compile Options:
AIC7XXX_RESET_DELAY : 5
AIC7XXX_TAGGED_QUEUEING: Adapter Support Enabled
Check below to see which
devices use tagged queueing
AIC7XXX_PAGE_ENABLE : Enabled (This is no longer an option)
AIC7XXX_PROC_STATS : Enabled
Adapter Configuration:
SCSI Adapter: Adaptec AIC-7896/7 Ultra2 SCSI host adapter
Ultra2-LVD/SE Wide Controller Channel B
PCI MMAPed I/O Base: 0xeb004000
Adapter SEEPROM Config: SEEPROM found and used.
Adaptec SCSI BIOS: Enabled
IRQ: 16
SCBs: Active 0, Max Active 1,
Allocated 15, HW 32, Page 255
Interrupts: 72
BIOS Control Word: 0x18a6
Adapter Control Word: 0x1c5e
Extended Translation: Enabled
Disconnect Enable Flags: 0xffff
Ultra Enable Flags: 0x0000
Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 24
Tagged Queue By Device array for aic7xxx host instance 2:
{255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
Actual queue depth per device for aic7xxx host instance 2:
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
Statistics:
(scsi2:0:3:0)
Device using Wide/Sync transfers at 11.4 MByte/sec, offset 15
Transinfo settings: current(43/15/1), goal(43/127/1), user(43/127/1)
Total transfers 3 (3 reads and 0 writes)
< 2K 2K+ 4K+ 8K+ 16K+ 32K+ 64K+ 128K+
Reads: 1 2 0 0 0 0 0 0
Writes: 0 0 0 0 0 0 0 0
=========================================================================
Adaptec AIC7xxx driver version: 5.1.10/3.2.4
Compile Options:
AIC7XXX_RESET_DELAY : 5
AIC7XXX_TAGGED_QUEUEING: Adapter Support Enabled
Check below to see which
devices use tagged queueing
AIC7XXX_PAGE_ENABLE : Enabled (This is no longer an option)
AIC7XXX_PROC_STATS : Enabled
Adapter Configuration:
SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter
Ultra Wide Controller
PCI MMAPed I/O Base: 0xeb001000
Adapter SEEPROM Config: SEEPROM found and used.
Adaptec SCSI BIOS: Disabled
IRQ: 17
SCBs: Active 0, Max Active 1,
Allocated 15, HW 16, Page 255
Interrupts: 101
BIOS Control Word: 0x18a2
Adapter Control Word: 0x005d
Extended Translation: Enabled
Disconnect Enable Flags: 0xffff
Ultra Enable Flags: 0x0000
Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 24
Tagged Queue By Device array for aic7xxx host instance 3:
{255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
Actual queue depth per device for aic7xxx host instance 3:
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
Statistics:
(scsi3:0:0:0)
Device using Wide/Sync transfers at 20.0 MByte/sec, offset 8
Transinfo settings: current(25/8/1), goal(25/8/1), user(25/8/1)
Total transfers 2 (2 reads and 0 writes)
< 2K 2K+ 4K+ 8K+ 16K+ 32K+ 64K+ 128K+
Reads: 1 1 0 0 0 0 0 0
Writes: 0 0 0 0 0 0 0 0
(scsi3:0:12:0)
Device using Narrow/Async transfers.
Transinfo settings: current(0/0/0), goal(0/0/0), user(25/8/1)
Total transfers 0 (0 reads and 0 writes)
< 2K 2K+ 4K+ 8K+ 16K+ 32K+ 64K+ 128K+
Reads: 0 0 0 0 0 0 0 0
Writes: 0 0 0 0 0 0 0 0
(scsi3:0:13:0)
Device using Narrow/Async transfers.
Transinfo settings: current(0/0/0), goal(0/0/0), user(25/8/1)
Total transfers 0 (0 reads and 0 writes)
< 2K 2K+ 4K+ 8K+ 16K+ 32K+ 64K+ 128K+
Reads: 0 0 0 0 0 0 0 0
Writes: 0 0 0 0 0 0 0 0
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E10xD2y-00005h-00>