Date: Sun, 24 Jan 1999 15:11:12 +0000 From: Mark Ovens <marko@uk.radan.com> To: dennis <dennisip@geocities.com> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Problem on PPP Message-ID: <36AB3810.7EA7875B@uk.radan.com> References: <199901241427.WAA21215@sn1.speednet.net>
next in thread | previous in thread | raw e-mail | index | archive | help
dennis wrote:
>
> I am running FreeBSD 2.2.6 but i have some problem on connecting to my
> ISP...
> after i login and choose the protocal(PPP),it show"Packet mode"and after a
> moment ,
> it disconnected..
>
> below is some of the content of my rc.conf,ppp.conf,ppp.log,ppp.linkup
>
> ppp.log:
> Jan 24 12:43:40 speednet ppp[266]: tun0: Command: term
> Jan 24 12:43:40 speednet ppp[266]: tun0: Phase: Connected!
> Jan 24 12:44:22 speednet ppp[266]: tun0: LCP: State change Initial-Closed
> Jan 24 12:44:22 speednet ppp[266]: tun0: LCP: LcpSendConfigReq
> Jan 24 12:44:22 speednet ppp[266]: tun0: LCP: ACFCOMP[2]
> Jan 24 12:44:22 speednet ppp[266]: tun0: LCP: PROTOCOMP[2]
> Jan 24 12:44:22 speednet ppp[266]: tun0: LCP: ACCMAP[6] 0x00000000
> Jan 24 12:44:22 speednet ppp[266]: tun0: LCP: MRU[4] 1500
> Jan 24 12:44:22 speednet ppp[266]: tun0: LCP: MAGICNUM[6] 0x43be75e6
> Jan 24 12:44:22 speednet ppp[266]: tun0: LCP: State change Closed -->
> Req-Sent
> Jan 24 12:44:22 speednet ppp[266]: tun0: LCP: Received Configure Ack (1)
> state = Req-Sent (6)
> Jan 24 12:44:22 speednet ppp[266]: tun0: LCP: State change Req-Sent -->
> Ack-Rcvd
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: Received Configure Request
> (152) state = Ack-Rcvd (7)
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: ACCMAP[6] 0x000a0000
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: MAGICNUM[6] 0x1cd35f14
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: PROTOCOMP[2]
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: ACFCOMP[2]
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: SendConfigAck(Ack-Rcvd)
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: ACCMAP[6] 0x000a0000
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: MAGICNUM[6] 0x1cd35f14
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: PROTOCOMP[2]
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: ACFCOMP[2]
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: State change Ack-Rcvd -->
> Opened
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: LcpLayerUp
> Jan 24 12:44:24 speednet ppp[266]: tun0: Phase: NewPhase: Authenticate
> Jan 24 12:44:24 speednet ppp[266]: tun0: Phase: his = PAP, mine = none
> Jan 24 12:44:24 speednet ppp[266]: tun0: Phase: PAP:
> Jan 24 12:44:24 speednet ppp[266]: tun0: Phase: PapInput: NAK
> Jan 24 12:44:24 speednet ppp[266]: tun0: Phase: Received PAP_NAK (No
> hostname received to authenticate)
> Jan 24 12:44:24 speednet ppp[266]: tun0: Phase: NewPhase: Terminate
The other end appears to be wanting PAP authentication. Try adding the
following to your ppp.conf in the ``speed:'' section instead of ``set
login .....'':
set authname <your_user_name>
set authkey <your_passwd>
also you may need to change the ``set ifaddr'' to:
set ifaddr 10.0.0.1/0 10.0.0.2/0 0.0.0.0 0.0.0.0
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: LcpLayerDown
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: SendTerminateReq.
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: State change Opened -->
> Closing
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: Received Terminate Request
> (153) state = Closing (4)
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: LcpSendTerminateAck.
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: Received Terminate Ack (2)
> state = Closing (4)
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: State change Closing -->
> Closed
> Jan 24 12:44:24 speednet ppp[266]: tun0: LCP: LcpLayerFinish
> Jan 24 12:44:25 speednet ppp[266]: tun0: Phase: Modem: Connect time: 45
> secs: 183 octets in, 151 octets out
> Jan 24 12:44:25 speednet ppp[266]: tun0: Phase: total 7 bytes/sec
> Jan 24 12:44:25 speednet ppp[266]: tun0: Phase: NewPhase: Dead
> Jan 24 12:44:30 speednet ppp[266]: tun0: Command: quit
> Jan 24 12:44:31 speednet ppp[266]: tun0: Phase: PPP Terminated (normal).
>
> rc.conf:
> ### Basic network options: ###
>
> hostname="speednet.net"
> nisdomainname="NO"
>
> firewall_enable="NO"
> firewall_type="UNKNOWN"
> firewall_quiet="NO"
> tcp_extensions="NO"
> network_interfaces="ppp0 lo0"
> ifconfig_lo0="inet 202.69.250.1"
> ifconfig_ppp0="inet netmask 255.255.255.0"
>
>
> ppp.conf:
>
> default:
>
> set log Phase Chat Connect Carrier LCP IPCP CCP tun command
>
> set device /dev/cuaa1
>
> set speed 115200
>
> deny lqr
>
> set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0
> OK
>
>
> speed:
>
> set phone 27306900
>
> set login "TIMEOUT 5 ogin:--ogin: ....... word: ......."
>
>
> set timeout 120
>
> set ifaddr 0 0
>
> delete ALL
>
> add 0 0 HISADDR
>
>
> ppp.linkup
>
> MYADDR:
> delete 0
> add 0 0 HISADDR
> !bg /usr/X11R6/bin/auplay /etc/ppp/linkup.au
>
> ThankS!
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
--
Trust the computer industry to shorten Year 2000 to Y2K. It
was this thinking that caused the problem in the first place.
FreeBSD - The Power To Serve http://www.freebsd.org
My Webpage http://www.users.globalnet.co.uk/~markov
_______________________________________________________________
Mark Ovens, CNC Apps Engineer, Radan Computational Ltd. Bath UK
CAD/CAM solutions for Sheetmetal Working Industry
mailto:marko@uk.radan.com http://www.radan.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36AB3810.7EA7875B>