Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 25 Jan 2008 19:59:37 +0200
From:      Stefan Lambrev <stefan.lambrev@moneybookers.com>
To:        freebsd-current@freebsd.org
Subject:   FreeBSD 7, bridge, PF and syn flood = very bad performance
Message-ID:  <479A2389.2000802@moneybookers.com>

next in thread | raw e-mail | index | archive | help
Greetings,

Does anyone try to see PF with "keep state" in action when under syn 
flood attack?
I tried to get some help in freebsd-pf@, because the test firewall, that 
I build hardly can handle 2-5MB/s syn flood.
Unfortunately I do not saw useful advice.
The problem is that a quad core bridge firewall running freebsd 7 amd64 
with PF is near useless and can't handle "small" SYN ddos.

Here is the schema that I'm testing:
web server (freebsd) - freebsd (bridged interfaces) - gigabit switch - 
clients + flooders
In this configuration ~25MB/s syn flood (and I think this limit is 
because of my switch) is not a problem and the web server responds 
without a problem.
With this configuration netperf -l 610 -p 10303 -H 10.3.3.1 shows 
116MB/s stable speed , so I guess there are no problems with cables, 
hardware and etc :)

But when I start pf (see below the config file) the traffic drops to 
2-3MB/s and the web server is hardly accessible.
It seems that device polling helps a lot in this situation, and at least 
the bridge firewall is accessible. Without "polling" the firewall is so 
heavily loaded
that even commands like "date" take few seconds to finish, with 2 cores 
at ~100% idle at same time.

I have "flat profiles" from hwpmc, and I think it indicates a problem:

(bridge, pf enabled, polling enabled, sched_ule - I have profiles and 
for other combinations too if needed)
  %   cumulative   self              self     total
 time   seconds   seconds    calls  ms/call  ms/call  name
 24.0  268416.00 268416.00        0  100.00%           _mtx_lock_sleep [1]
  6.7  343572.50 75156.50        0  100.00%           
pf_state_compare_ext_gwy [2]
  6.7  418405.50 74833.00        0  100.00%           pf_src_compare [3]
  3.9  462298.50 43893.00        0  100.00%           
pf_state_compare_lan_ext [4]
  3.6  503019.50 40721.00        0  100.00%           pf_test [5]
  3.2  538671.50 35652.00        0  100.00%           pf_test_tcp [6]
  3.1  573743.50 35072.00        0  100.00%           bcopy [7]
  2.3  599406.50 25663.00        0  100.00%           bridge_pfil [8]
  2.0  622096.50 22690.00        0  100.00%           
pf_state_compare_id [9]
  2.0  644331.50 22235.00        0  100.00%           pfsync_pack_state [10]
  1.5  661563.50 17232.00        0  100.00%           uma_zalloc_arg [11]
  1.3  676296.50 14733.00        0  100.00%           bzero [12]
  1.3  690842.00 14545.50        0  100.00%           
bus_dmamap_load_mbuf_sg [13]
  1.2  704521.50 13679.50        0  100.00%           uma_zfree_arg [14]
  1.2  717554.50 13033.00        0  100.00%           
bridge_rtnode_lookup [15]
  1.2  730575.50 13021.00        0  100.00%           _rw_rlock [16]
  1.1  743076.50 12501.00        0  100.00%           rn_match [17]
  1.0  754016.50 10940.00        0  100.00%           bridge_forward [18]
  1.0  764766.00 10749.50        0  100.00%           em_encap [19]
  0.9  775400.00 10634.00        0  100.00%           _rw_runlock [20]
........

Also when running without polling top -S shows that external em0 
interface's taskq takes 100% CPU
The situation is even worse when running with SCHED_BSD.

Here is my test pf.conf
quick
#macros
ext_if="em0"
int_if="em1"
br_if="bridge0"

www="10.3.3.1"

#sets
set skip on lo0
set skip on $int_if
set skip on $br_if
set limit states 20000000
set limit src-nodes 19000000
set optimization aggressive

table <abusive_hosts> persist file "/etc/abusive_hosts"

block log quick from <abusive_hosts> to any
block log quick from any to <abusive_hosts>

pass in on $ext_if proto tcp from any to $www port { 80, 443 } flags 
S/SA keep state \
(source-track rule, max-src-conn-rate 150/10, max-src-states 500, 
max-src-nodes 4000000, overload <abusive_hosts> flush global)

-- 

Best Wishes,
Stefan Lambrev
ICQ# 24134177




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?479A2389.2000802>