Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 31 Aug 2005 19:43:53 +0200 (CEST)
From:      User Pm <pm@npf.homeunix.org>
To:        freebsd-sparc64@freebsd.org
Subject:   mouse on a Ultra5
Message-ID:  <20050831194006.L67193@npf.homeunix.org>

next in thread | raw e-mail | index | archive | help
Hi all,

Does the sun mouse (attached to the keyboard) works on a ultra 5?
I do not see any mention to it in the dmesg output...
If yes how to I configure it for use with xorg?

Thanks,

Paulo

Attached dmesg output --------- 
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA3 #6: Tue Aug 30 13:50:35 CEST 2005
     root@joshua.laas.fr:/usr/obj/usr/src/sys/LOCAL
Timecounter "tick" frequency 360000000 Hz quality 1000
real memory  = 134217728 (128 MB)
avail memory = 116703232 (111 MB)
cpu0: Sun Microsystems UltraSparc-IIi Processor (360.00 MHz CPU)
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <OFW PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pci1: <OFW PCI bus> on pcib1
ebus0: <PCI-EBus2 bridge> mem 0xf0000000-0xf0ffffff,0xf1000000-0xf17fffff at device 1.0 on pci1
auxio0: <Sun Auxiliary I/O> addr 0x1400726000-0x1400726003,0x1400728000-0x1400728003,0x140072a000-0x140072a003,0x140072c000-0x140072c003,0x140072f000-0x140072f003 on ebus0
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
puc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f irq 43 on ebus0
uart0: <SAB 82532 v3.2, channel A> on puc0
uart0: CTS oflow
uart1: <SAB 82532 v3.2, channel B> on puc0
uart1: CTS oflow
uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0
uart2: keyboard (1200,n,8,1)
kbd0 at sunkbd0
uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0
ebus0: <ecpp> addr 0x14003043bc-0x14003043cb,0x140030015c-0x140030015d,0x1400700000-0x140070000f irq 34 (no driver attached)
ebus0: <fdthree> addr 0x14003023f0-0x14003023f7,0x1400706000-0x140070600f,0x1400720000-0x1400720003 irq 39 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 80d13ab5
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,CS4231> addr 0x1400200000-0x14002000ff,0x1400702000-0x140070200f,0x1400704000-0x140070400f,0x1400722000-0x1400722003 irq 35,36 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on pci1
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: 08:00:20:d1:3a:b5
machfb0: <ATI 3D Rage Pro> mem 0xe1000000-0xe1ffffff,0xe2000000-0xe2000fff at device 2.0 on pci1
machfb0: console
machfb0: 16 MB aperture at 0xca550000, 1 KB registers at 0xe17ffc00
machfb0: 4096 KB SGRAM 98.924 MHz, maximum RAMDAC clock 230 MHz, DSP
machfb0: resolution 1152x900 at 8 bpp
atapci0: <CMD 646 WDMA2 controller> port 0xc00000-0xc00007,0xc00008-0xc0000b,0xc00010-0xc00017,0xc00018-0xc0001b,0xc00020-0xc0002f at device 3.0 on pci1
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pci2: <OFW PCI bus> on pcib2
syscons0: <System console> on nexus0
syscons0: Unknown <16 virtual consoles, flags=0x300>
Timecounters tick every 1.000 msec
ad0: 8223MB <Seagate ST38410A 3.03> at ata2-master WDMA2
acd0: CDRW <CRD-8322B/1.05> at ata3-master PIO4
Trying to mount root from ufs:/dev/ad0a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <LG CD-ROM CRD-8322B 1.05> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: cd present [10710 x 2048 byte records]



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050831194006.L67193>