Date: Sat, 13 May 2006 14:44:26 +0000 From: "Angka H. K." <harikurniawan@gmail.com> To: "=?ISO-8859-1?Q?Dag-Erling_Sm=F8rgrav?=" <des@des.no> Cc: current@freebsd.org Subject: Re: DMA no active on HL-DT-STCD-RW/DVD Message-ID: <4c40c4e70605130744o5d0fd566n6a219ade5924561d@mail.gmail.com> In-Reply-To: <86hd3u6lbc.fsf@xps.des.no> References: <4c40c4e70605130152s52fb3188nd847a0b8b0d46972@mail.gmail.com> <861wuy8b84.fsf@xps.des.no> <4c40c4e70605130418y3208840ctb0b1c7b1f61b7a74@mail.gmail.com> <86wtcq6psi.fsf@xps.des.no> <4c40c4e70605130659q4c486a64u188177bd5eb804f5@mail.gmail.com> <86hd3u6lbc.fsf@xps.des.no>
next in thread | previous in thread | raw e-mail | index | archive | help
You are right if it master and slave it should be at the same cable. Maybe I cannot change the jumper. It's a laptop. And don't have enough braveness to open it by my self. It'll take days to check it. On 5/13/06, Dag-Erling Sm=F8rgrav <des@des.no> wrote: > "Angka H. K." <harikurniawan@gmail.com> writes: > > angka# atacontrol mode acd0 udma33 > > current mode =3D WDMA2 > > [...] > > ata0-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUNSUPPORTED cable=3D40 wire > > ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire > > First of all, your drive does not support UDMA. Second, it does > support WDMA, and that's what it's configured for. Third, there's > something weird with the cable; ata reports that ad0 is on an 80-wire > cable while acd0 is on a 40-wire cable, but since they're master and > slave on the same channel, they're on the same cable. > > I would try changing the cable, making sure that the drives are in the > correct order on the cable, and if possible moving the CD drive to the > second channel (don't forget to set the jumpers to master / single) > > DES > -- > Dag-Erling Sm=F8rgrav - des@des.no >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4c40c4e70605130744o5d0fd566n6a219ade5924561d>