Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 25 May 2006 14:05:44 -0600 (MDT)
From:      "M. Warner Losh" <imp@bsdimp.com>
To:        jim@netgate.com
Cc:        phk@phk.freebsd.dk, small@freebsd.org, current@freebsd.org
Subject:   Re: FreeBSD's embedded agenda
Message-ID:  <20060525.140544.1474621433.imp@bsdimp.com>
In-Reply-To: <472414CE-94E8-4C8A-9586-DCA9E02A53C3@netgate.com>
References:  <2538.1148556253@critter.freebsd.dk> <472414CE-94E8-4C8A-9586-DCA9E02A53C3@netgate.com>

next in thread | previous in thread | raw e-mail | index | archive | help
In message: <472414CE-94E8-4C8A-9586-DCA9E02A53C3@netgate.com>
            Jim Thompson <jim@netgate.com> writes:
: 
: On May 25, 2006, at 1:24 AM, Poul-Henning Kamp wrote:
: 
: > Platforms
: > ---------
: >
: > I386 goes without saying.
: >
: > AMD64 may have an embedded future in the high end segment, keeping
: > it "unbloated" is a concern.
: >
: > ARM is going great according to Jean-Mark and Warner, and we are
: > looking for a cheap (< $200) reference platform to point people at.
: 
: These are available.  Someone else was asking (privately) for sub- 
: $100, which is (much) more difficult.

There's many sub $100 MIPS boards available that have enough
resourses, barely, for a minimal system to boot/run on.

: > NanoBSD caters only to the "run read-only from flash" area, call
: > it if you will the "soekris" area.  I need to investigate if it
: > makes sense to use the FreeSBIE framework to build nanobsd images.
: 
: All soekris boards have CF, which looks, for all the world like an  
: IDE drive.
: 
: "real" flash is quite different.   Soekris (and the PC Engines  
: boards) are a proper subset of i386, and
: should be treated as such.

Yes.  Running off a real flash is much more difficult...

: > What can you do ?
: >
: > If you work with embedded FreeBSD, I think the best you can do is to
: > chime in to small@freebsd.org, tell us what you are doing (as far as
: > company policy will allow you), and if you have any ideas, wishes,
: > problems, let us hear about them.
: 
: I'm looking for the time to get FreeBSD running on the Gateworks  
: Xscale (arm) boards.  These are interesting to me for a couple  
: reasons, but the
: most important is that most of the boards come with a CF socket,  
: which means not having to deal with smaller flash sizes, and/or  
: dealing with a FFS
: at the FreeBSD level (for now).

Those would be a good level to start from.  Subsetting is a pain
during development, but once developed, it shouldn't be too hard to
shrink things down.  Doing it generally might be an issue...

Warner



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060525.140544.1474621433.imp>