Date: Wed, 23 Jan 2002 22:45:53 +0100 From: "Petar Forai" <petar.forai@chello.at> To: <freebsd-stable@freebsd.org>, <freebsd-questions@freebsd.org>, <freebsd-smp@freebsd.org> Subject: 4.5/SMP clock drifting Message-ID: <000c01c1a457$54d5eae0$5700a8c0@MSHOST>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0009_01C1A45F.B6712000
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Hi!
I've a strange problem on my SMP machine running 4.5. At 8am i use ntpdate
to sync the time, at 9:37am when i ntpdate again my time offset from the
timeserver is about 0.7s!
My dmesg output is att.
regards,
#pfo
------=_NextPart_000_0009_01C1A45F.B6712000
Content-Type: application/octet-stream;
name="misc"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="misc"
Copyright (c) 1992-2002 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.5-RC #0: Sat Jan 19 11:19:30 CET 2002=0A=
root@KilKenny.vip.at:/usr/src/sys/compile/KILKENNY=0A=
Calibrating clock(s) ... TSC clock: 996708824 Hz, i8254 clock: 1193023 Hz=0A=
CLK_USE_I8254_CALIBRATION not specified - using default frequency=0A=
Timecounter "i8254" frequency 1193182 Hz=0A=
CLK_USE_TSC_CALIBRATION not specified - using old calibration method=0A=
CPU: Pentium III/Pentium III Xeon/Celeron (996.85-MHz 686-class CPU)=0A=
Origin =3D "GenuineIntel" Id =3D 0x68a Stepping =3D 10=0A=
=
Features=3D0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>=0A=
real memory =3D 1073741824 (1048576K bytes)=0A=
Physical memory chunk(s):=0A=
0x00001000 - 0x0009efff, 647168 bytes (158 pages)=0A=
0x002ed000 - 0x3fff7fff, 1070641152 bytes (261387 pages)=0A=
avail memory =3D 1042186240 (1017760K bytes)=0A=
Programming 16 pins in IOAPIC #0=0A=
IOAPIC #0 intpin 2 -> irq 0=0A=
Programming 16 pins in IOAPIC #1=0A=
SMP: CPU0 apic_initialize():=0A=
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff=0A=
FreeBSD/SMP: Multiprocessor motherboard=0A=
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000=0A=
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000=0A=
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000=0A=
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000=0A=
bios32: Found BIOS32 Service Directory header at 0xc00fdb90=0A=
bios32: Entry =3D 0xfdba0 (c00fdba0) Rev =3D 0 Len =3D 1=0A=
pcibios: PCI BIOS entry at 0xdbc1=0A=
pnpbios: Found PnP BIOS data at 0xc00f4c50=0A=
pnpbios: Entry =3D f0000:3954 Rev =3D 1.0=0A=
Other BIOS signatures found:=0A=
ACPI: 00000000=0A=
Preloaded elf kernel "kernel" at 0xc02c3000.=0A=
Preloaded elf module "accf_http.ko" at 0xc02c309c.=0A=
Pentium Pro MTRR support enabled=0A=
SMP: CPU0 bsp_apic_configure():=0A=
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff=0A=
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070=0A=
pci_open(1a): mode1res=3D0x80000000 (0x80000000)=0A=
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D80] is there =
(id=3D00091166)=0A=
Using $PIR table, 10 entries at 0xc00f51c0=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard=0A=
found-> vendor=3D0x1166, dev=3D0x0009, revid=3D0x06=0A=
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
found-> vendor=3D0x1166, dev=3D0x0009, revid=3D0x06=0A=
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
IOAPIC #1 intpin 6 -> irq 2=0A=
Freeing (NOT implemented) redirected PCI irq 11.=0A=
found-> vendor=3D0x1002, dev=3D0x4752, revid=3D0x27=0A=
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Da, irq=3D2=0A=
map[10]: type 1, range 32, base fd000000, size 24=0A=
map[14]: type 1, range 32, base 0000d800, size 8=0A=
map[18]: type 1, range 32, base feaff000, size 12=0A=
IOAPIC #1 intpin 4 -> irq 5=0A=
Freeing (NOT implemented) redirected PCI irq 9.=0A=
found-> vendor=3D0x8086, dev=3D0x1229, revid=3D0x08=0A=
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Da, irq=3D5=0A=
map[10]: type 1, range 32, base feafe000, size 12=0A=
map[14]: type 1, range 32, base 0000d400, size 6=0A=
map[18]: type 1, range 32, base fe900000, size 20=0A=
IOAPIC #1 intpin 5 -> irq 7=0A=
Freeing (NOT implemented) redirected PCI irq 5.=0A=
found-> vendor=3D0x8086, dev=3D0x1229, revid=3D0x08=0A=
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Da, irq=3D7=0A=
map[10]: type 1, range 32, base feafd000, size 12=0A=
map[14]: type 1, range 32, base 0000d000, size 6=0A=
map[18]: type 1, range 32, base fe700000, size 20=0A=
found-> vendor=3D0x1166, dev=3D0x0200, revid=3D0x50=0A=
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
found-> vendor=3D0x1166, dev=3D0x0211, revid=3D0x00=0A=
class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
map[20]: type 1, range 32, base 0000ffa0, size 4=0A=
IOAPIC #0 intpin 10 -> irq 9=0A=
Freeing (NOT implemented) redirected PCI irq 10.=0A=
found-> vendor=3D0x1166, dev=3D0x0220, revid=3D0x04=0A=
class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Da, irq=3D9=0A=
map[10]: type 1, range 32, base feafc000, size 12=0A=
pci0: <PCI bus> on pcib0=0A=
pci0: <ATI Mach64-GR graphics accelerator> (vendor=3D0x1002, =
dev=3D0x4752) at 1.0 irq 2=0A=
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem =
0xfe900000-0xfe9fffff,0xfeafe000-0xfeafefff irq 5 at device 4.0 on pci0=0A=
fxp0: using memory space register mapping=0A=
fxp0: Ethernet address 00:e0:81:04:fc:0d=0A=
fxp0: PCI IDs: 8086 1229 8086 100c 0008=0A=
fxp0: Dynamic Standby mode is disabled=0A=
inphy0: <i82555 10/100 media interface> on miibus0=0A=
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xd000-0xd03f mem =
0xfe700000-0xfe7fffff,0xfeafd000-0xfeafdfff irq 7 at device 5.0 on pci0=0A=
fxp1: using memory space register mapping=0A=
fxp1: Ethernet address 00:e0:81:04:fc:0e=0A=
fxp1: PCI IDs: 8086 1229 8086 100c 0008=0A=
fxp1: Dynamic Standby mode is disabled=0A=
inphy1: <i82555 10/100 media interface> on miibus1=0A=
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at =
device 15.1 on pci0=0A=
ata0: iobase=3D0x01f0 altiobase=3D0x03f6 bmaddr=3D0xffa0=0A=
ata0: mask=3D03 status0=3D20 status1=3D30=0A=
ata0: mask=3D03 ostat0=3D20 ostat2=3D30=0A=
ata0-master: ATAPI probe a=3D20 b=3D20=0A=
ata0-slave: ATAPI probe a=3D30 b=3D30=0A=
ata0: mask=3D03 status0=3D20 status1=3D30=0A=
ata0-master: ATA probe a=3D25 b=3D25=0A=
ata0-slave: ATA probe a=3D25 b=3D25=0A=
ata0: devices=3D00=0A=
ata0: at 0x1f0 irq 14 on atapci0=0A=
ata1: iobase=3D0x0170 altiobase=3D0x0376 bmaddr=3D0xffa8=0A=
ata1: mask=3D03 status0=3D50 status1=3D00=0A=
ata1: mask=3D03 ostat0=3D50 ostat2=3D00=0A=
ata1-master: ATAPI probe a=3D14 b=3Deb=0A=
ata1-slave: ATAPI probe a=3D7f b=3D7f=0A=
ata1: mask=3D03 status0=3D00 status1=3D00=0A=
ata1: devices=3D04=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
pci0: <OHCI USB controller> (vendor=3D0x1166, dev=3D0x0220) at 15.2 irq 9=0A=
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard=0A=
IOAPIC #1 intpin 9 -> irq 10=0A=
Freeing (NOT implemented) redirected PCI irq 7.=0A=
found-> vendor=3D0x9005, dev=3D0x00cf, revid=3D0x01=0A=
class=3D01-00-00, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Da, irq=3D10=0A=
map[10]: type 1, range 32, base 0000e400, size 8=0A=
map[14]: type 1, range 64, base febfe000, size 12=0A=
IOAPIC #1 intpin 10 -> irq 11=0A=
Freeing (NOT implemented) redirected PCI irq 10.=0A=
found-> vendor=3D0x9005, dev=3D0x00cf, revid=3D0x01=0A=
class=3D01-00-00, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Db, irq=3D11=0A=
map[10]: type 1, range 32, base 0000e800, size 8=0A=
map[14]: type 1, range 64, base febff000, size 12=0A=
pci1: <PCI bus> on pcib1=0A=
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xe400-0xe4ff mem =
0xfebfe000-0xfebfefff irq 10 at device 6.0 on pci1=0A=
ahc0: Reading SEEPROM...done.=0A=
ahc0: Manual LVD Termination=0A=
ahc0: BIOS eeprom is present=0A=
ahc0: Secondary High byte termination Enabled=0A=
ahc0: Secondary Low byte termination Enabled=0A=
ahc0: Primary Low Byte termination Enabled=0A=
ahc0: Primary High Byte termination Enabled=0A=
ahc0: Downloading Sequencer Program... 419 instructions downloaded=0A=
aic7899: Ultra160 Wide Channel A, SCSI Id=3D7, 32/255 SCBs=0A=
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xe800-0xe8ff mem =
0xfebff000-0xfebfffff irq 11 at device 6.1 on pci1=0A=
ahc1: Reading SEEPROM...done.=0A=
ahc1: Manual LVD Termination=0A=
ahc1: BIOS eeprom is present=0A=
ahc1: Secondary High byte termination Enabled=0A=
ahc1: Secondary Low byte termination Enabled=0A=
ahc1: Primary Low Byte termination Enabled=0A=
ahc1: Primary High Byte termination Enabled=0A=
ahc1: Downloading Sequencer Program... 419 instructions downloaded=0A=
aic7899: Ultra160 Wide Channel B, SCSI Id=3D7, 32/255 SCBs=0A=
ata-: ata1 exists, using next available unit number=0A=
Trying Read_Port at 203=0A=
Trying Read_Port at 243=0A=
Trying Read_Port at 283=0A=
Trying Read_Port at 2c3=0A=
Trying Read_Port at 303=0A=
Trying Read_Port at 343=0A=
Trying Read_Port at 383=0A=
Trying Read_Port at 3c3=0A=
isa_probe_children: disabling PnP devices=0A=
isa_probe_children: probing non-PnP devices=0A=
orm0: <Option ROMs> at iomem =
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcffff on isa0=0A=
ata2 failed to probe at port 0x170 irq 15 on isa0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
atkbd: the current kbd controller command byte 0065=0A=
atkbd: keyboard ID 0x41ab (2)=0A=
kbd0 at atkbd0=0A=
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000=0A=
psm0: current command byte:0065=0A=
psm0: failed to reset the aux device.=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
fb0: vga0, vga, type:VGA (5), flags:0x7007f=0A=
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000=0A=
fb0: init mode:24, bios mode:3, current mode:24=0A=
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k=0A=
VGA parameters upon power-up=0A=
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 =0A=
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 =0A=
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =0A=
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =0A=
VGA parameters in BIOS for mode 24=0A=
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 =0A=
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 =0A=
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =0A=
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =0A=
EGA/VGA parameters to be used for mode 24=0A=
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 =0A=
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 =0A=
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =0A=
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)=0A=
isa_probe_children: probing PnP devices=0A=
SMP: enabled INTs: 1, 5, 7, 10, 11, 14, 15, apic_imen: 0x00ff335d=0A=
BIOS Geometries:=0A=
0:03fefe3f 0..1022=3D1023 cylinders, 0..254=3D255 heads, 1..63=3D63 =
sectors=0A=
1:03fefe3f 0..1022=3D1023 cylinders, 0..254=3D255 heads, 1..63=3D63 =
sectors=0A=
0 accounted for=0A=
Device configuration finished.=0A=
APIC_IO: Testing 8254 interrupt delivery=0A=
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 =
intpin 2=0A=
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0=0A=
SMP: AP CPU #1 Launched!=0A=
SMP: CPU1 apic_initialize():=0A=
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff=0A=
ata1-master: piomode=3D4 dmamode=3D2 udmamode=3D2 dmaflag=3D1=0A=
ata1-master: success setting PIO4 on generic chip=0A=
acd0: <LTN526S/YS0A> CDROM drive at ata1 as master=0A=
acd0: read 8957KB/s (53034KB/s), 120KB buffer, PIO4=0A=
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet=0A=
acd0: Audio: play, 255 volume levels=0A=
acd0: Mechanism: ejectable tray=0A=
acd0: Medium: no/blank disc inside, unlocked=0A=
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc0:A:0:0): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
ahc0: target 0 using 16bit transfers=0A=
ahc0: target 0 synchronous at 80.0MHz DT, offset =3D 0x3f=0A=
(ahc1:A:2:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc1:A:2:0): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
ahc1: target 2 using 16bit transfers=0A=
ahc1: target 2 synchronous at 80.0MHz DT, offset =3D 0x3f=0A=
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc0:A:0:0): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
(ahc1:A:2:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc0:A:0:1): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc1:A:2:0): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
(ahc0:A:0:1): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
(ahc1:A:2:1): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc0:A:0:2): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc0:A:0:2): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
(ahc1:A:2:1): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
(ahc0:A:0:3): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc1:A:2:2): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc0:A:0:3): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
(ahc1:A:2:2): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
(ahc0:A:0:4): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc0:A:0:4): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
(ahc1:A:2:3): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc0:A:0:5): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc0:A:0:5): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
(ahc1:A:2:3): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
(ahc0:A:0:6): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc1:A:2:4): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc0:A:0:6): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
(ahc1:A:2:4): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
(ahc0:A:0:7): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc1:A:2:5): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc0:A:0:7): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
(ahc1:A:2:5): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
(ahc1:A:2:6): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc1:A:2:6): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
(ahc1:A:2:7): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2=0A=
(ahc1:A:2:7): Received PPR width 1, period 9, offset 3f,options 2=0A=
Filtered to width 1, period 9, offset 3f, options 2=0A=
Creating DISK da0=0A=
Creating DISK da1=0A=
pass0 at ahc0 bus 0 target 0 lun 0=0A=
pass0: <IBM DDYS-T18350N S96H> Fixed Direct Access SCSI-3 device =0A=
pass0: Serial Number DYLRQ149=0A=
pass0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged =
Queueing Enabled=0A=
pass1 at ahc1 bus 0 target 2 lun 0=0A=
pass1: <IBM DDYS-T18350N S96H> Fixed Direct Access SCSI-3 device =0A=
pass1: Serial Number DYLRQ147=0A=
pass1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged =
Queueing Enabled=0A=
da0 at ahc0 bus 0 target 0 lun 0=0A=
da0: <IBM DDYS-T18350N S96H> Fixed Direct Access SCSI-3 device =0A=
da0: Serial Number DYLRQ149=0A=
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged =
Queueing Enabled=0A=
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)=0A=
da1 at ahc1 bus 0 target 2 lun 0=0A=
da1: <IBM DDYS-T18350N S96H> Fixed Direct Access SCSI-3 device =0A=
da1: Serial Number DYLRQ147=0A=
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged =
Queueing Enabled=0A=
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)=0A=
Mounting root from ufs:/dev/da0s1a=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
start_init: trying /sbin/init=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
Linux ELF exec handler installed=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da0s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
da1s1: type 0xa5, start 63, end =3D 35841014, size 35840952 : OK=0A=
(da0:ahc0:0:0:0): tagged openings now 128=0A=
(da1:ahc1:0:2:0): tagged openings now 128=0A=
pid 4469 (yafc), uid 0 on /usr: file system full=0A=
------=_NextPart_000_0009_01C1A45F.B6712000--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000c01c1a457$54d5eae0$5700a8c0>