Date: Wed, 23 Feb 2000 10:06:47 +0100 From: mkes@ra.rockwell.com To: freebsd-questions@freebsd.org Subject: pccardd: NULL com in siounload ?? Message-ID: <OFB9A031ED.75FCFA59-ONC125688E.00306C5E@cle.ra.rockwell.com>
next in thread | raw e-mail | index | archive | help
Hi
I have a problem to make my pccard modem running with pccardd. When boo=
ting the machine pccardd says:
---
Card inserted, slot 0
Card inserted, slot 1
ep0: utp/bnc[*UTP*] address 00:60:97:cd:62:c5
NULL com in siounload
Return IRQ=3D10
---
and a message "... failed to allocate resource" follows. This is how it=
"normaly" behaves (the ep0 NIC is always OK). But (only) once the mode=
m card
got correctly configured :-(
I have atatched the output of the pccardc dumpcis command, dump of my /=
etc/pccard.conf file and a piece of the kernel build configuration file=
(/sys/i386/conf/LOCAL).
The /etc/pccard.conf file contains also configuration of my old modem c=
ard which used the same IRQ=3D10 without problems.
Any idea what's wrog is welcome.
Mira
---------------------------
pccardc dumpcis:
---------------------------
Configuration data for card in slot 0
Tuple #1, code =3D 0x1 (Common memory descriptor), length =3D 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS =3D OFF
Speed =3D No speed, Memory block size =3D reserved, 32 units
Tuple #2, code =3D 0x17 (Attribute memory descriptor), length =3D 3
000: 43 02 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS =3D OFF
Speed =3D 150nS, Memory block size =3D 8Kb, 1 units
Tuple #3, code =3D 0x20 (Manufacturer ID), length =3D 4
000: 01 01 89 05
PCMCIA ID =3D 0x101, OEM ID =3D 0x589
Tuple #4, code =3D 0x21 (Functional ID), length =3D 2
000: 06 00
Network/LAN adapter
Tuple #5, code =3D 0x15 (Version 1 info), length =3D 58
000: 04 01 33 43 6f 6d 20 43 6f 72 70 6f 72 61 74 69
010: 6f 6e 00 33 43 35 38 39 44 00 54 50 2f 42 4e 43
020: 20 4c 41 4e 20 43 61 72 64 20 56 65 72 2e 20 32
030: 61 00 30 30 30 30 30 32 00 ff
Version =3D 4.1, Manuf =3D [3Com Corporation],card vers =3D [3C589=
D]
Addit. info =3D [TP/BNC LAN Card Ver. 2a],[000002]
Tuple #6, code =3D 0x1a (Configuration map), length =3D 6
000: 02 03 00 00 01 03
Reg len =3D 3, config register addr =3D 0x10000, last config =3D 0=
x3
Registers: XX------
Tuple #7, code =3D 0x1b (Configuration entry), length =3D 15
000: c1 01 1d 71 55 35 55 54 e0 72 5d 64 30 ff ff
Config index =3D 0x1(default)
Interface byte =3D 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 3 x 10mA
Max current average over 10 ms: 5 x 10mA
Power down supply current: 5 x 1mA
Wait scale Speed =3D 7.0 x 100 ns
RDY/BSY scale Speed =3D 7.0 x 100 ns
Card decodes 18 address lines, full 8/16 Bit I/O
IRQ modes: Level, Pulse
IRQs: IOCK 1 4 5 6 8 10 11 12 14
Tuple #8, code =3D 0x1b (Configuration entry), length =3D 7
000: 03 01 71 55 26 26 54
Config index =3D 0x3
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 2 x 100mA
Max current average over 10 ms: 2 x 100mA
Power down supply current: 5 x 1mA
Tuple #9, code =3D 0x19 (JEDEC descr for attribute memory), length =3D =
3
000: 00 00 ff
Tuple #10, code =3D 0x14 (No link), length =3D 0
Tuple #11, code =3D 0x10 (Checksum), length =3D 5
000: 88 ff 81 00 00
Checksum from offset -120, length 129, value is 0x0
Tuple #12, code =3D 0xff (Terminator), length =3D 149
000: 00 03 83 00 fd ff ff ff ff ff ff ff ff ff ff ff
010: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
030: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
040: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
050: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
060: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
070: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
090: ff ff ff ff ff
Configuration data for card in slot 1
Tuple #1, code =3D 0x1 (Common memory descriptor), length =3D 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS =3D OFF
Speed =3D No speed, Memory block size =3D reserved, 32 units
Tuple #2, code =3D 0x15 (Version 1 info), length =3D 39
000: 04 01 50 43 4d 43 49 41 20 4d 41 4b 45 52 00 35
010: 36 4b 20 56 2e 39 30 20 44 61 74 61 46 61 78 20
020: 4d 6f 64 65 6d 00 ff
Version =3D 4.1, Manuf =3D [PCMCIA MAKER],card vers =3D [56K V.90 =
DataFax Modem]
Addit. info =3D [=FF],[d Ver. 2a]
Tuple #3, code =3D 0x20 (Manufacturer ID), length =3D 4
000: 00 02 01 00
PCMCIA ID =3D 0x200, OEM ID =3D 0x1
Tuple #4, code =3D 0x21 (Functional ID), length =3D 2
000: 02 00
Serial port/modem
Tuple #5, code =3D 0x22 (Functional EXT), length =3D 4
000: 00 02 0f 5c
Serial interface extension:
16550 UART, Parity - Space,Mark,Odd,Even,
Tuple #6, code =3D 0x22 (Functional EXT), length =3D 9
000: 05 1f 1f 00 04 00 00 04 00
Modem interface capabilities:
Tuple #7, code =3D 0x22 (Functional EXT), length =3D 9
000: 06 1f 1f 00 04 00 00 04 00
Modem interface capabilities:
Tuple #8, code =3D 0x22 (Functional EXT), length =3D 12
000: 02 06 00 3f 1c 03 03 0f 07 00 01 b5
Data modem services available:
Tuple #9, code =3D 0x22 (Functional EXT), length =3D 8
000: 13 06 00 1f 00 02 00 b5
Tuple #10, code =3D 0x22 (Functional EXT), length =3D 8
000: 23 06 00 1f 00 02 00 b5
Tuple #11, code =3D 0x1a (Configuration map), length =3D 5
000: 01 27 80 ff 67
Reg len =3D 2, config register addr =3D 0xff80, last config =3D 0x=
27
Registers: XXX--XX-
Tuple #12, code =3D 0x1b (Configuration entry), length =3D 19
000: cf 41 99 79 55 3d 86 46 26 4c aa 60 f8 03 07 f0
010: bc 86 28
Config index =3D 0xf(default)
Interface byte =3D 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Continuous supply current: 3.5 x 10mA
Max current average over 1 second: 1 x 100mA, ext =3D 0x46
Max current average over 10 ms: 2 x 100mA
Power down supply current: 4.5 x 1mA
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start =3D 0x3f8 block length =3D 0x8
IRQ modes: Level, Pulse, Shared
IRQs: 4 5 6 7 10 11 12 13 15
Max twin cards =3D 0
Misc attr: (Audio-BVD2) (Power down supported)
Tuple #13, code =3D 0x1b (Configuration entry), length =3D 7
000: 17 08 aa 60 f8 02 07
Config index =3D 0x17
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start =3D 0x2f8 block length =3D 0x8
Tuple #14, code =3D 0x1b (Configuration entry), length =3D 7
000: 1f 08 aa 60 e8 03 07
Config index =3D 0x1f
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start =3D 0x3e8 block length =3D 0x8
Tuple #15, code =3D 0x1b (Configuration entry), length =3D 7
000: 27 08 aa 60 e8 02 07
Config index =3D 0x27
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start =3D 0x2e8 block length =3D 0x8
Tuple #16, code =3D 0xff (Terminator), length =3D 0
2 slots found
--------------------------
/etc/pccard.conf:
--------------------------
# Sample PCCARD configuration file
#
# Removing all IRQ conflicts from this file can't be done because of so=
me
# IRQ-selfish PC-cards. So if you want to use some of these cards in
# your machine, you will be forced to modify their IRQ parameters from
# the following list.
#
# IRQ =3D=3D 0 means "allocate free IRQ from IRQ pool"
# IRQ =3D=3D 16 means "do not use IRQ (e.g. PIO mode)"
#
# $Id: pccard.conf.sample,v 1.24.2.1 1999/02/05 09:42:27 markm Exp $
# Generally available IO ports
io 0x240-0x360
# Generally available IRQs (Built-in sound-card owners remove 5)
irq 10 11 13 15
# Available memory slots
memory 0xd4000 96k
# 3Com Etherlink III 3C589D
card "3Com Corporation" "3C589D"
config 0x1 "ep0" 11
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether ep0 link0 link1
remove echo 3Com Etherlink III removed
remove /sbin/ifconfig ep0 delete
# my old modem
# NewMedia 14.4K FAX/Data Modem
#card "CIRRUS LOGIC" "FAX MODEM"
# config 0x21 "sio1" 10
# insert echo Newmedia 14.4 Modem inserted
# remove echo Newmedia 14.4 Modem removed
# NewMedia 56K NetSurfer
card "PCMCIA MAKER" "56K V.90 DataFax Modem"
config 0x17 "sio1" 10
insert echo Newmedia 56K Modem inserted
remove echo Newmedia 56K Modem removed
-------------------------------------------------------------------
/sys/i386/conf/LOCAL (kernel configuration):
-------------------------------------------------------------------
device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4
device sio1 at isa? port "IO_COM2" tty irq 10=
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?OFB9A031ED.75FCFA59-ONC125688E.00306C5E>