From owner-freebsd-questions  Fri Feb  2 11:07:26 1996
Return-Path: owner-questions
Received: (from root@localhost)
          by freefall.freebsd.org (8.7.3/8.7.3) id JAA01918
          for questions-outgoing; Fri, 2 Feb 1996 09:08:42 -0800 (PST)
Received: from who.cdrom.com (who.cdrom.com [192.216.222.3])
          by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id JAA01861
          for <questions@freebsd.org>; Fri, 2 Feb 1996 09:08:27 -0800 (PST)
Received: from mail.zrz.TU-Berlin.DE (mail.zrz.TU-Berlin.DE [130.149.4.15])
          by who.cdrom.com (8.6.12/8.6.11) with ESMTP id BAA05282
          for <questions@freebsd.org>; Fri, 2 Feb 1996 01:35:41 -0800
Received: from itrsp2.fb10.tu-berlin.de by mail.zrz.TU-Berlin.DE with SMTP (PP);
          Fri, 2 Feb 1996 10:28:17 +0100
Date: Fri, 2 Feb 96 10:28:17 +0100
From: Goetz Fischer <gofi1033@itrsp2.fb10.tu-berlin.de>
Message-Id: <9602020928.AA04871@itrsp2.fb10.tu-berlin.de>
To: 101603.1662@compuserve.com
Subject: Re: Mach64 XF86Config file
Cc: questions@freebsd.org
Sender: owner-questions@freebsd.org
Precedence: bulk

 
> 
> I have a ATI Pro Turbo Mach64 graphics card ( 1mb ) and a svga monitor (hsync
> 31-50 vsync 50-90mhz) but I don't seem tobe able to get a decent X11 config
> using
> FreeBSD 2.05 and Xfree 3.1.1
  
Hi Adrian!
If you have a Mach64 <CT> chip on your card, you have to install XF86312
and after that install XF86312B (beta, look at www.xfree86.org).
3.12B has direct support for mach64CT and works fine.

By Goetz