Date: Thu, 23 May 2019 02:20:42 +0100 From: Balanga Bar <balanga.bar@gmail.com> To: James Shuriff <james@opentech.cc> Cc: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: GoFlexHome not booting from disk Message-ID: <CADocevArupF-K802h7Fp%2Br%2BoLr0FUFasQbVsq%2BUmTyXMaUnPhw@mail.gmail.com> In-Reply-To: <BN7PR06MB51877F76293C31662AE5F1F8AA000@BN7PR06MB5187.namprd06.prod.outlook.com> References: <CADocevCT8=tta_vPmHvcvG3JSXjCtBU=ijO=ADbmFD0JSROwYw@mail.gmail.com> <BN7PR06MB518733A348B82563D03AA280AA000@BN7PR06MB5187.namprd06.prod.outlook.com> <CADocevAospQhXfqvyY_bix2iL7WQJfZjDV=Hu1cFBV835KLS%2BQ@mail.gmail.com> <BN7PR06MB51877F76293C31662AE5F1F8AA000@BN7PR06MB5187.namprd06.prod.outlook.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I got my U-Boot from the doozan list - https://forum.doozan.com/list.php?3. It is one which includes the U-Boot API. By goflexhome_defconfig do you mean this? https://github.com/sbabic/u-boot-imx/blob/master/configs/goflexhome_defconf= ig I've never heard of it and don't know how it works. Are there any instructions? On Wed, May 22, 2019 at 11:41 PM James Shuriff <james@opentech.cc> wrote: > U-Boot supports many different boards through =E2=80=9Cdefconfigs=E2=80= =9D. The > goflexhome_defconfig sets up U-Boot to build for GoFlexHome. How did you > build/acquire U-Boot? > > > > - James Shuriff > > > > *From:* Balanga Bar <balanga.bar@gmail.com> > *Sent:* Wednesday, May 22, 2019 6:20 PM > *To:* James Shuriff <james@opentech.cc> > *Cc:* freebsd-arm@freebsd.org > *Subject:* Re: GoFlexHome not booting from disk > > > > Not sure what goflexhome_defconfig is - can't say I've ever heard of it. > > > > I'm using DOCKSTAR. > > > > On Wed, May 22, 2019 at 11:14 PM James Shuriff <james@opentech.cc> wrote: > > What kernconf are you using? I assume you built U-Boot using > goflexhome_defconfig. > > - James Shuriff > > -----Original Message----- > From: owner-freebsd-arm@freebsd.org <owner-freebsd-arm@freebsd.org> On > Behalf Of Balanga Bar > Sent: Wednesday, May 22, 2019 6:02 PM > To: freebsd-arm@freebsd.org > Subject: GoFlexHome not booting from disk > > I've managed to build FreeBSD 11.1 for armv5 so that I can boot up my > GoFlex Home from USB but when I copy the same files to a hard disk it wil= l > not boot. > > Could anyone suggest what I need to check? > > I have logs for both instances and can display them if necessary, but the > main difference is the when attempting to boot from USB I get the > following:- > > *********************************** USB > ************************************************************ > > Initializing devices... > starting USB... > USB0: USB EHCI 1.00 > scanning bus 0 for devices... 2 USB Device(s) found > scanning usb for storage devices.... > Use USB retry period from the environment: 15 second(s) > 1 Storage Device(s) found > > Reset IDE: ide_preinit failed > Loading envs from usb 0... > reading /boot/uEnv.txt > 146 bytes read in 63 ms (2 KiB/s) > ... envs loaded > importing envs ... > > reading ubldr > 295973 bytes read in 85 ms (3.3 MiB/s) > ## Starting application at 0x01000098 ... > Consoles: U-Boot console.. > Compatible U-Boot API signature found @0x7b12860 > > FreeBSD/arm U-Boot loader, Revision 1.2 > (Thu Nov 30 14:06:37 GMT 2017 root@Test) > > DRAM: 128MB > Number of U-Boot devices: 2 > U-Boot env: loaderdev not set, will probe all devices. > Found U-Boot device: disk > Probing all disk devices... > Checking unit=3D0 slice=3D<auto> partition=3D<auto>... good. > Booting from disk0s2a: > > *********************************** IDE > ************************************************************ > Initializing devices... > starting USB... > USB0: USB EHCI 1.00 > canning bus 0 for devices... 1 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found > > Reset IDE: Bus 0: .OK Bus 1: not available.. > Device 0: Model: HTS541020G9SA00 Firm: MB1OC60J Ser#: MPBAL0X1C5LD1M > Type: Hard Disk > Supports 48-bit addressing > Capacity: 19077.1 MB =3D 18.6 GB (39070080 x 512) Loading env= s > from ide 0... > reading /boot/uEnv.txt > 134 bytes read in 46 ms (2 KiB/s) > ... envs loaded > importing envs ... > > * Bad device ide 1 ** > reading ubldr > 295973 bytes read in 140 ms (2 MiB/s) > ## Starting application at 0x01000098 ... > Consoles: U-Boot console > Compatible U-Boot API signature found @0x7b12860 > > FreeBSD/arm U-Boot loader, Revision 1.2 > (Thu Nov 30 14:06:37 GMT 2017 root@Test) > > DRAM: 128MB > Number of U-Boot devices: 1 > U-Boot env: loaderdev not set, will probe all devices. > Found U-Boot device: net > Booting from net0: > > can't load 'kernel' > > > *************************************************************************= ***************************** > > Not sure why it doesn't identify the IDE disk as a U-Boot device.... > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" > ________________________________ > DISCLAIMER: This message and any attachments are intended solely for the > use of the recipient and may contain confidential information. If you hav= e > received this message in error please delete it and promptly notify the > sender, James Shuriff (james@opentech.cc<mailto:james@opentech.cc>). > > ------------------------------ > DISCLAIMER: This message and any attachments are intended solely for the > use of the recipient and may contain confidential information. If you hav= e > received this message in error please delete it and promptly notify the > sender, James Shuriff (james@opentech.cc). >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CADocevArupF-K802h7Fp%2Br%2BoLr0FUFasQbVsq%2BUmTyXMaUnPhw>