Date: Sat, 07 Apr 2007 04:52:07 +0000 From: "Rick Nekus" <solarux@hotmail.com> To: freebsd-multimedia@freebsd.org Subject: Re: FreeBSD-6.2 ; Hauppage PVR-350 ; "pvrxxx" port - not working. Message-ID: <BAY134-F14590A84AD680802691A9AA15B0@phx.gbl> In-Reply-To: <20070401220308.61598af5.torfinn.ingolfsen@broadpark.no>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi All, First,thanks Torfinn Ingolfsen for the pci TV-card info tips, and for heading me in the right direction. I tried installing the newer http://usleepless.110mb.com/pvrxxx_port-01042007.tgz from usleep, and it seemed to install some updates, sorry I didn't get the complete "make" output at that time, but the last several output lines gave me the same errors as "Anders Troback" got from his subject thread "Re: pvrxxx 0x75" -at this point I cleaned up my pvr ports; and installed the pvr250 port according to Jim Stapleton's reply to Anders's subject above. I have a newer pvr-350 too. sorry about these threads gettin' a little messy now anyway, for the first time I've been able to load the cxm drivers,.. I found a couple strange things; pv | grep pvr 0B 0:12:56 [ 0B/s ] [<=> ] the output just sits there? and, when I run "cat /dev/cxm0 > filneame.mpg" i get "cxm0: video decoder isn't locked" in /var/log/messages ? -but everything else looks sane (see below) Is there something else I can try to do. ? ------------------------------------------------------------------------- pkg_info | grep -i pvr250 pvr250-20051030 Hauppauge PVR-250/350 TV cards driver for the cxm device ------------------------------------------------------------------ [rick@tiger ~]$ sudo pciconf -lv | grep -B 4 video cxm0@pci2:10:0: class=0x040000 card=0x40000070 chip=0x08034444 rev=0x01 hdr=0x00 vendor = 'Conexant Inc (Was: Globespan, ICompression Inc)' device = 'iTVC15/CX23415 MPEG Codec' class = multimedia subclass = video [rick@tiger ~]$ sudo lspci -vs 02:0a.0 02:0a.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR-350 Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at f4000000 (32-bit, prefetchable) Capabilities: [44] Power Management version 2 --------------------------------------------------------------------------------- /var/log/messages Apr 6 22:23:25 tiger sudo: rick : TTY=ttyp1 ; PWD=/boot ; USER=root ; COMMAND=/usr/bin/vi loader.conf Apr 6 22:29:07 tiger sudo: rick : TTY=ttyp1 ; PWD=/usr/home/rick ; USER=root ; COMMAND=/sbin/kldload cxm_iic Apr 6 22:29:19 tiger sudo: rick : TTY=ttyp1 ; PWD=/usr/home/rick ; USER=root ; COMMAND=/sbin/kldload cxm Apr 6 22:32:13 tiger su: rick to root on /dev/ttyp1 Apr 6 23:34:15 tiger kernel: cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf4000000-0xf7ffffff irq 21 at device 10.0 on pci2 Apr 6 23:34:15 tiger kernel: cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 Apr 6 23:34:15 tiger kernel: iicbb0: <I2C bit-banging driver> on cxm_iic0 Apr 6 23:34:15 tiger kernel: iicbus0: <Philips I2C bus> on iicbb0 master-only Apr 6 23:34:15 tiger kernel: cxm0: LG Innotek TAPE-H001F tuner Apr 6 23:34:15 tiger kernel: cxm0: SAA7115 rev 1 video decoder Apr 6 23:34:15 tiger kernel: cxm0: MSP4448G-A2 audio decoder Apr 6 23:34:15 tiger kernel: cxm0: IR Remote Apr 6 23:34:15 tiger kernel: cxm0: [GIANT-LOCKED] Apr 6 23:34:18 tiger kernel: cxm0: encoder firmware version 0x2050032 Apr 6 23:34:18 tiger kernel: cxm0: decoder firmware version 0x2020023 ---------------------------------------------------------------------------------- cr--r--r-- 1 root wheel 0, 41 Apr 6 23:40 /dev/cxm0 ---------------------------------------------------------------------------------- dmesg: ... cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf4000000-0xf7ffffff irq 21 at device 10.0 on pci2 cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 iicbb0: <I2C bit-banging driver> on cxm_iic0 iicbus0: <Philips I2C bus> on iicbb0 master-only cxm0: LG Innotek TAPE-H001F tuner cxm0: SAA7115 rev 1 video decoder cxm0: MSP4448G-A2 audio decoder cxm0: IR Remote cxm0: [GIANT-LOCKED] cxm0: encoder firmware version 0x2050032 cxm0: decoder firmware version 0x2020023 cxm0: video decoder isn't locked cxm0: video decoder isn't locked cxm0: video decoder isn't locked cxm0: video decoder isn't locked ... ---------------------------------------------------------------------------- [rick@tiger ~]$ cat /boot/loader.conf snd_ich_load="YES" atapicam_load="YES" hw.ata.atapi_dma="1" nvidia_load="YES" linux_load="YES" #bktr_load="YES" cxm_iic_load="YES" cxm_load="YES" ------------------------------------------------------------------------------- tiger# kldstat Id Refs Address Size Name 1 19 0xc0400000 70aee8 kernel 2 2 0xc0b0b000 1adb8 linux.ko 3 1 0xc0b26000 5fa0 snd_ich.ko 4 2 0xc0b2c000 22b88 sound.ko 5 1 0xc0b4f000 4ae8 atapicam.ko 6 1 0xc0b54000 6d2a84 nvidia.ko 7 2 0xc1227000 2d80 cxm_iic.ko 8 1 0xc122a000 8fb04 cxm.ko 9 1 0xc12ba000 59f20 acpi.ko ------------------------------------------------------------------------- >From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> >To: freebsd-multimedia@freebsd.org >Subject: Re: FreeBSD-6.2 ; Hauppage PVR-350 ; "pvrxxx" port - not working. >Date: Sun, 01 Apr 2007 22:03:08 +0200 > >On Sun, 01 Apr 2007 19:08:48 +0000 >Rick Nekus <solarux@hotmail.com> wrote: > > > I did portscan fetch;portscan extract; portscan update > > that should do it right ?, or is there a special "usleepless" update > >If you mean "portsnap" here, yes, thayt should do it. > > > > available? > > umm, trying to make sense of other threads here, does this mean > > install FreeBSD 5.3 ? (is that the alternative for now?), ... > >No, by all means. I know it is April Fools' Day, but therer is no need >to go backwards. :-) >FreeBSD 6.2 will be fine. > > > uhh ok, well thats' a small letdown, should I use the pvr250 ( they > >I should rephrase that; the pvrxxx port doesn't work with the pvr-350 >in *my* machine right now. This might be caused by other things than >the port itself, which I haven't ruled out yet (a bad cable, for >example). > > > both look the same to me pvr250/xxx ?) or maybe (on a dry-humour note) > >The pvr250 and the pvrxxx port might look the same, but the last time I >checked, the pvr250 port was missing some needed ioctl's that MythTV >required. This is some months ago, so things might have changed. Or >not, I haven't checked. > >You could try the pvr250 port; if it works - good. > > > it sounds close to me ?, am I reading this wrong, but how did you get > >Yes, I guess our cards are equal, perhaps except for the tuner. > > > "yours'" working (or did you?) being you have the same cx23415 chip > >I got mine working, or actually, usleep got mine working while >testing the pvrxxx driver. Right now, the canle signal is down, so I >can only watch recordings, not test drivers. > > > (PVR-350) set I have -or is this a tuner specific fullfilment that is > > not supported? > >I don't think the tuner is shown in the pciconf / lspci output, I think >you will have to load a driver for that. Here is what the pvrxxx driver >says about my card (from dmesg): >cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf8000000-0xfbffffff irq 20 at >device 0.0 on pci2 >cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 >iicbb0: <I2C bit-banging driver> on cxm_iic0 >iicbus0: <Philips I2C bus> on iicbb0 master-only >cxm0: Philips FM1216ME MK3 tuner >cxm0: SAA7115 rev 1 video decoder >cxm0: MSP4418G-B3 audio decoder >cxm0: IR Remote >cxm0: [FAST] >cxm0: encoder firmware version 0x2060039 >cxm0: decoder firmware version 0x2020023 > >This is with driver: >root@kg-quiet# pv | grep pvr >pvrxxx-20060822 = up-to-date with port > >(possibly modified) >on a machine running: >root@kg-quiet# uname -a >FreeBSD kg-quiet.kg4.no 6.2-STABLE FreeBSD 6.2-STABLE #15: Thu Jan 25 >21:44:50 CET 2007 root@kg-quiet.kg4.no:/usr/obj/usr/src/sys/QUIET >amd64 > >HTH >PS. You don't have to CC me, I am subscribed to the freebsd-mobile list. >-- >Regards, >Torfinn Ingolfsen, >Norway >_______________________________________________ >freebsd-multimedia@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia >To unsubscribe, send any mail to >"freebsd-multimedia-unsubscribe@freebsd.org" _________________________________________________________________ Your Space. Your Friends. Your Stories. Share your world with Windows Live Spaces. http://spaces.live.com/?mkt=en-ca
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY134-F14590A84AD680802691A9AA15B0>