From owner-freebsd-hackers Tue Jan 2 10:17:11 2001 From owner-freebsd-hackers@FreeBSD.ORG Tue Jan 2 10:17:00 2001 Return-Path: Delivered-To: freebsd-hackers@freebsd.org Received: from mxbh4.isus.emc.com (mxbh4.isus.emc.com [168.159.208.52]) by hub.freebsd.org (Postfix) with ESMTP id C894237B400 for ; Tue, 2 Jan 2001 10:16:59 -0800 (PST) Received: by mxbh4.isus.emc.com with Internet Mail Service (5.5.2650.21) id ; Tue, 2 Jan 2001 13:16:54 -0500 Message-ID: <0BEC2FAE2A21D411965C00E0291E7C3340BFC2@corpmx17.isus.emc.com> From: Neff_Glen@emc.com To: hackers@freebsd.org Cc: JONESJG@dg-rtp.dg.com, stovall@dg-rtp.dg.com, davenport_ken@emc.com Subject: Problems with sf driver? Date: Tue, 2 Jan 2001 13:17:10 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-hackers@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I administer a box running v4.2-stable with a pair of the Adaptec ANA-62044 64-bit PCI, Quad port ethernet adapters. Six of the eight ethernet ports are in use. The box routes traffic between five private networks and provides NAT services out the public world on the sixth interface. I encounter an intermittant problem where one of the ports on a private network will quit functioning (usually sf2 or sf3). Nothing on that segment can reach the machine and if I try to ping something on that segment from the box in question I get: ping: sendto: No buffer space available The other five ports in use on the system continue to function normally. If I "ifconfig sfX down/up" the problem goes away. I've seen the problem as often as twice a day and sometimes gone a month without seeing it. The private segments carry very heavy SMB traffic. I have upped NMBCLUSTERS to 8192 with no success. Influenced by what I found digging though the DejaNews archives, I have also increased maxusers from 32 to 128, but do not believe the box has been up long enough to see if this has made a difference or not. Since these settings are global to the OS and I'm only encountering a problem with one port at a time, while the others continue to function normally, I have doubts they are an issue and suspect is must be a problem with the sf driver itself. I have swapped-out the NICs, the PC, and encountered the same problem with v3.x-stable. Thanks for any help you might offer. Below I'll paste some pertinate system configuration info. -G /* Glen R. J. Neff neff_glen@emc.com 919-248-6145 Dirty deeds done for a meager 20% markup. . . */ uname -a output: FreeBSD squeakyfromme.rtp.dg.com 4.2-STABLE FreeBSD 4.2-STABLE #1: Tue Jan 2 11:36:03 EST 2001 root@squeakyfromme.rtp.dg.com:/usr/src/sys/compile/squeakyfromme i386 Kernel config file: machine i386 # cpu I386_CPU # cpu I486_CPU # cpu I586_CPU cpu I686_CPU ident squeakyfromme maxusers 128 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols # options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking # options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem # options MD_ROOT #MD is a potential root device options NFS #Network Filesystem # options NFS_ROOT #NFS usable as root device, NFS required # options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem # options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] # options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # Added to to TX buffer problems with so many NICs. options NMBCLUSTERS=8192 # Required for NATd to function options IPFIREWALL options IPDIVERT # Required for port fowarding? # options IPFILTER # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa # device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 # device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives # device atapifd # ATAPI floppy drives # device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers # RAID controllers # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 # device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) # device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 # device sio2 at isa? disable port IO_COM3 irq 5 # device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer # device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. # device de # DEC/Intel DC21x4x (``Tulip'') # device fxp # Intel EtherExpress PRO/100B (82557, 82558) # device tx # SMC 9432TX (83c170 ``EPIC'') # device vx # 3Com 3c590, 3c595 (``Vortex'') # device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support # device dc # DEC/Intel 21143 and various workalikes # device pcn # AMD Am79C79x PCI 10/100 NICs # device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') # device sis # Silicon Integrated Systems SiS 900/SiS 7016 # device ste # Sundance ST201 (D-Link DFE-550TX) # device tl # Texas Instruments ThunderLAN # device vr # VIA Rhine, Rhine II # device wb # Winbond W89C840F # device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. # device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 # device ex # device ep # device fe0 at isa? port 0x300 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. # device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. # device an # Xircom Ethernet # device xe # The probe order of these is presently determined by i386/isa/isa_compat.c. # device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 # device lnc0 at isa? port 0x280 irq 10 drq 0 # device cs0 at isa? port 0x300 # device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support # pseudo-device sl 1 # Kernel SLIP # pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" # pseudo-device gif 4 # IPv6 and IPv4 tunneling # pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # pseudo-device bpf #Berkeley packet filter rc.conf: sendmail_enable="YES" saver="daemon" blanktime="180" font8x8="swiss-8x8" font8x14="NO" font8x16="swiss-8x16" keyrate="fast" sshd_enable="YES" inetd_enable="YES" network_interfaces="sf0 sf5 sf4 sf3 sf2 sf1 lo0" ifconfig_sf0="inet 128.222.25.114 netmask 255.255.255.0" ifconfig_sf5="inet 10.2.24.3 netmask 255.255.255.0" ifconfig_sf4="inet 10.2.23.4 netmask 255.255.255.0" ifconfig_sf3="inet 10.2.22.4 netmask 255.255.255.0" ifconfig_sf2="inet 10.2.21.4 netmask 255.255.255.0" ifconfig_sf1="inet 10.2.20.4 netmask 255.255.255.0" defaultrouter="128.222.25.253" hostname="squeakyfromme.rtp.dg.com" usbd_enable="NO" gateway_enable="YES" firewall_enable="YES" natd_enable="YES" natd_flags="-s -m" natd_interface="sf0" rc.firewall: /sbin/ipfw -f flush /sbin/ipfw add divert natd all from any to any via sf0 /sbin/ipfw add pass all from any to any To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message