Date: Tue, 17 Jun 2008 08:50:03 GMT From: "Maxim Frolov" <maxim.frolov.07@gmail.com> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/124128: puc driver doesn't support VScom PCIex-800H 8-port serial cards Message-ID: <200806170850.m5H8o3Ic085394@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/124128; it has been noted by GNATS.
From: "Maxim Frolov" <maxim.frolov.07@gmail.com>
To: "Remko Lodder" <remko@freebsd.org>
Cc: freebsd-gnats-submit@freebsd.org
Subject: Re: kern/124128: puc driver doesn't support VScom PCIex-800H 8-port serial cards
Date: Tue, 17 Jun 2008 12:49:50 +0400
Hello,
Here is pciconf -vl with the original pucdata.c compiled -
hostb0@pci0:0:0:0: class=0x060000 card=0x820b1043 chip=0x29a08086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '?(82P965) Intel P965/G965 Processor to I/O Controller'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x00008086 chip=0x29a18086
rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '?(82Q965, 82G965, 82P965) Intel P965/G965 PCI
Express Root Port'
class = bridge
subclass = PCI-PCI
vgapci0@pci0:0:2:0: class=0x030000 card=0x820b1043 chip=0x29a28086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'G965 Integrated Graphics Controller'
class = display
subclass = VGA
none0@pci0:0:3:0: class=0x078000 card=0x820b1043 chip=0x29a48086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'P965/G965 HECI Controller'
class = simple comms
uhci0@pci0:0:26:0: class=0x0c0300 card=0x81ec1043 chip=0x28348086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
uhci1@pci0:0:26:1: class=0x0c0300 card=0x81ec1043 chip=0x28358086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
ehci0@pci0:0:26:7: class=0x0c0320 card=0x81ec1043 chip=0x283a8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '81EC1043 (?) ICH8 Enhanced USB2 Enhanced Host Controller'
class = serial bus
subclass = USB
none1@pci0:0:27:0: class=0x040300 card=0x821a1043 chip=0x284b8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H &SUBSYS_81EC1043&REV_02\3&11583659&0&D8'
class = multimedia
pcib2@pci0:0:28:0: class=0x060400 card=0x821a1043 chip=0x283f8086
rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 1'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:28:3: class=0x060400 card=0x821a1043 chip=0x28458086
rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 4'
class = bridge
subclass = PCI-PCI
pcib5@pci0:0:28:4: class=0x060400 card=0x821a1043 chip=0x28478086
rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 5'
class = bridge
subclass = PCI-PCI
pcib6@pci0:0:28:5: class=0x060400 card=0x821a1043 chip=0x28498086
rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 6'
class = bridge
subclass = PCI-PCI
uhci2@pci0:0:29:0: class=0x0c0300 card=0x81ec1043 chip=0x28308086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
uhci3@pci0:0:29:1: class=0x0c0300 card=0x81ec1043 chip=0x28318086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
uhci4@pci0:0:29:2: class=0x0c0300 card=0x81ec1043 chip=0x28328086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
ehci1@pci0:0:29:7: class=0x0c0320 card=0x81ec1043 chip=0x28368086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB2 EHCI'
class = serial bus
subclass = USB
pcib8@pci0:0:30:0: class=0x060401 card=0x821a1043 chip=0x244e8086
rev=0xf2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub
Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x821a1043 chip=0x28108086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801HB/HR (ICH8/R) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci1@pci0:0:31:2: class=0x01018f card=0x821a1043 chip=0x28208086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'ICH8 4 port Serial ATA Storage Controller ?'
class = mass storage
subclass = ATA
none2@pci0:0:31:3: class=0x0c0500 card=0x821a1043 chip=0x283e8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) SMBus Controller'
class = serial bus
subclass = SMBus
atapci2@pci0:0:31:5: class=0x010185 card=0x821a1043 chip=0x28258086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '? ICH8 2 port Serial ATA Storage Controller'
class = mass storage
subclass = ATA
pcib4@pci0:5:0:0: class=0x060400 card=0x00000000 chip=0x8231104c
rev=0x03 hdr=0x01
vendor = 'Texas Instruments (TI)'
device = 'PCIe to PCI Bridge'
class = bridge
subclass = PCI-PCI
none3@pci0:6:0:0: class=0x070006 card=0x00001415 chip=0xa00714d2
rev=0x00 hdr=0x00
vendor = 'Titan Electronics Inc'
class = simple comms
subclass = UART
none4@pci0:6:0:1: class=0x070006 card=0x00001415 chip=0xa00814d2
rev=0x00 hdr=0x00
vendor = 'Titan Electronics Inc'
class = simple comms
subclass = UART
atapci0@pci0:4:0:0: class=0x010185 card=0x81e41043 chip=0x2363197b
rev=0x03 hdr=0x00
vendor = 'JMicron Technology Corp'
device = 'JMB36X PCIe-to-SATA-300/IDE RAID Controller'
class = mass storage
subclass = ATA
pcib7@pci0:2:0:0: class=0x060400 card=0x00000000 chip=0x8231104c
rev=0x03 hdr=0x01
vendor = 'Texas Instruments (TI)'
device = 'PCIe to PCI Bridge'
class = bridge
subclass = PCI-PCI
none5@pci0:3:0:0: class=0x070006 card=0x00001415 chip=0xa00714d2
rev=0x00 hdr=0x00
vendor = 'Titan Electronics Inc'
class = simple comms
subclass = UART
none6@pci0:3:0:1: class=0x070006 card=0x00001415 chip=0xa00814d2
rev=0x00 hdr=0x00
vendor = 'Titan Electronics Inc'
class = simple comms
subclass = UART
puc0@pci0:8:0:0: class=0x070002 card=0x808014d2 chip=0x808014d2
rev=0x00 hdr=0x00
vendor = 'Titan Electronics Inc'
device = 'VScom PCI-800L 8 x RS-232 Controller'
class = simple comms
subclass = UART
xl0@pci0:8:1:0: class=0x020000 card=0x100010b7 chip=0x920010b7 rev=0x74 hdr=0x00
vendor = '3COM Corp, Networking Division'
device = '3C905 CX-TX-M Fast EtherLink for PC Management NIC'
class = network
subclass = ethernet
fwohci0@pci0:8:3:0: class=0x0c0010 card=0x81fe1043 chip=0x30441106
rev=0xc0 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6306 VIA Fire II IEEE-1394 OHCI Link Layer Controller'
class = serial bus
subclass = FireWire
skc0@pci0:8:4:0: class=0x020000 card=0x811a1043 chip=0x432011ab
rev=0x14 hdr=0x00
vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
device = 'Yukon 88E8001/8003/8010 PCI Gigabit Ethernet
Controller (Copper)'
class = network
subclass = ethernet
Here is dmesg after boot -v with the original pucdata.c compiled -
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #5: Fri May 30 15:46:20 MSD 2008
mfrolov@blackbox.dionalab.int:/usr/obj/usr/src/sys/SERIAL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0910000.
Calibrating clock(s) ... i8254 clock: 1193193 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1605008120 Hz
CPU: Intel(R) Celeron(R) CPU E1200 @ 1.60GHz (1605.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
2nd-level cache: 512-KB, 2-way set associative, 64-byte line size
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 512 kbytes, 2-way associative, 64 bytes/line
real memory = 1048117248 (999 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000003d5b5fff, 1016651776 bytes (248206 pages)
avail memory = 1016279040 (969 MB)
MP Configuration Table version 1.4 found at 0xc00f14e0
APIC: Using the MPTable enumerator.
SMP: Added CPU 0 (BSP)
SMP: Added CPU 1 (AP)
MPTable: <P5B >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f6bd0
pnpbios: Entry = f0000:7b7a Rev = 1.0
Other BIOS signatures found:
ioapic0: Assuming intbase of 0
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: Routing IRQ 0 -> intpin 2
lapic: Routing ExtINT -> LINT0
lapic: Routing NMI -> LINT1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
null: <null device, zero device>
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
kbd: new array size 4
kbd1 at kbdmux0
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: INT 16 interface
cpu0 on motherboard
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 828082806000828
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1 on motherboard
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 828082806000828
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pci_open(1): mode 1 addr port (0x0cf8) is 0x80001020
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=29a08086)
pcibios: BIOS version 3.00
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x29a0, revid=0x02
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x29a1, revid=0x02
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: slot 1 INTA routed to irq 16
found-> vendor=0x8086, dev=0x29a2, revid=0x02
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 32, base 0xffa00000, size 20, enabled
map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
map[20]: type I/O Port, range 32, base 0xec00, size 3, enabled
pcib0: slot 2 INTA routed to irq 16
found-> vendor=0x8086, dev=0x29a4, revid=0x02
domain=0, bus=0, slot=3, func=0
class=07-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xff9fbc00, size 4, enabled
pcib0: slot 3 INTA routed to irq 16
found-> vendor=0x8086, dev=0x2834, revid=0x02
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0xd880, size 5, enabled
pcib0: slot 26 INTA routed to irq 16
found-> vendor=0x8086, dev=0x2835, revid=0x02
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0xdc00, size 5, enabled
pcib0: slot 26 INTB routed to irq 17
found-> vendor=0x8086, dev=0x283a, revid=0x02
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xff9fb800, size 10, enabled
pcib0: slot 26 INTC routed to irq 18
found-> vendor=0x8086, dev=0x284b, revid=0x02
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xff9f4000, size 14, enabled
pcib0: slot 27 INTA routed to irq 22
found-> vendor=0x8086, dev=0x283f, revid=0x02
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0106, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: slot 28 INTA routed to irq 17
found-> vendor=0x8086, dev=0x2845, revid=0x02
domain=0, bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=d, irq=15
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: slot 28 INTD routed to irq 19
found-> vendor=0x8086, dev=0x2847, revid=0x02
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: slot 28 INTA routed to irq 17
found-> vendor=0x8086, dev=0x2849, revid=0x02
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: slot 28 INTB routed to irq 16
found-> vendor=0x8086, dev=0x2830, revid=0x02
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
map[20]: type I/O Port, range 32, base 0xd400, size 5, enabled
pcib0: slot 29 INTA routed to irq 23
found-> vendor=0x8086, dev=0x2831, revid=0x02
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=15
map[20]: type I/O Port, range 32, base 0xd480, size 5, enabled
pcib0: slot 29 INTB routed to irq 19
found-> vendor=0x8086, dev=0x2832, revid=0x02
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
map[20]: type I/O Port, range 32, base 0xd800, size 5, enabled
pcib0: slot 29 INTC routed to irq 18
found-> vendor=0x8086, dev=0x2836, revid=0x02
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xff9fb400, size 10, enabled
pcib0: slot 29 INTA routed to irq 23
found-> vendor=0x8086, dev=0x244e, revid=0xf2
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2810, revid=0x02
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2820, revid=0x02
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=15
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xe880, size 3, enabled
map[14]: type I/O Port, range 32, base 0xe800, size 2, enabled
map[18]: type I/O Port, range 32, base 0xe480, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xe400, size 2, enabled
map[20]: type I/O Port, range 32, base 0xe080, size 4, enabled
map[24]: type I/O Port, range 32, base 0xe000, size 4, enabled
pcib0: slot 31 INTB routed to irq 19
found-> vendor=0x8086, dev=0x283e, revid=0x02
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
map[10]: type Memory, range 32, base 0, size 8, memory disabled
map[20]: type I/O Port, range 32, base 0x400, size 5, enabled
pcib0: slot 31 INTC routed to irq 18
found-> vendor=0x8086, dev=0x2825, revid=0x02
domain=0, bus=0, slot=31, func=5
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=15
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xd080, size 3, enabled
map[14]: type I/O Port, range 32, base 0xd000, size 2, enabled
map[18]: type I/O Port, range 32, base 0xcc00, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xc880, size 2, enabled
map[20]: type I/O Port, range 32, base 0xc800, size 4, enabled
map[24]: type I/O Port, range 32, base 0xc480, size 4, enabled
pcib0: slot 31 INTB routed to irq 19
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: prefetched decode 0xbfd00000-0xbfdfffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
vgapci0: <VGA-compatible display> port 0xec00-0xec07 mem
0xffa00000-0xffafffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on
pci0
agp0: <Intel G965 SVGA controller> on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000
vgapci0: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xffa00000
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
pci0: <simple comms> at device 3.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 16 at
device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd880
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 48
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 17 at
device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc00
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 49
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xff9fb800-0xff9fbbff
irq 18 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xff9fb800
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 50
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: waiting for BIOS to give up control
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib2: domain 0
pcib2: secondary bus 7
pcib2: subordinate bus 7
pcib2: I/O decode 0x0-0x0
pcib2: prefetched decode 0xbfe00000-0xbfefffff
pci7: <PCI bus> on pcib2
pci7: domain=0, physical bus=7
pcib3: <PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib3: domain 0
pcib3: secondary bus 5
pcib3: subordinate bus 6
pcib3: I/O decode 0x9000-0x9fff
pcib3: memory decode 0xff600000-0xff6fffff
pcib3: no prefetched decode
pci5: <PCI bus> on pcib3
pci5: domain=0, physical bus=5
found-> vendor=0x104c, dev=0x8231, revid=0x03
domain=0, bus=5, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0117, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 16 messages, 64 bit
pcib4: <MPTable PCI-PCI bridge> at device 0.0 on pci5
pcib4: domain 0
pcib4: secondary bus 6
pcib4: subordinate bus 6
pcib4: I/O decode 0x9000-0x9fff
pcib4: memory decode 0xff600000-0xff6fffff
pcib4: no prefetched decode
pci6: <PCI bus> on pcib4
pci6: domain=0, physical bus=6
found-> vendor=0x14d2, dev=0xa007, revid=0x00
domain=0, bus=6, slot=0, func=0
class=07-00-06, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=15
powerspec 1 supports D0 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0x9800, size 5, enabled
pcib4: requested I/O range 0x9800-0x981f: in range
pcib3: requested I/O range 0x9800-0x981f: in range
map[14]: type Memory, range 32, base 0xff6fd000, size 12, enabled
pcib4: requested memory range 0xff6fd000-0xff6fdfff: good
pcib3: requested memory range 0xff6fd000-0xff6fdfff: good
map[18]: type I/O Port, range 32, base 0x9480, size 5, enabled
pcib4: requested I/O range 0x9480-0x949f: in range
pcib3: requested I/O range 0x9480-0x949f: in range
map[1c]: type Memory, range 32, base 0xff6fc000, size 12, enabled
pcib4: requested memory range 0xff6fc000-0xff6fcfff: good
pcib3: requested memory range 0xff6fc000-0xff6fcfff: good
pcib4: slot 0 INTA routed to irq 19
found-> vendor=0x14d2, dev=0xa008, revid=0x00
domain=0, bus=6, slot=0, func=1
class=07-00-06, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=15
powerspec 1 supports D0 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0x9c00, size 5, enabled
pcib4: requested I/O range 0x9c00-0x9c1f: in range
pcib3: requested I/O range 0x9c00-0x9c1f: in range
map[14]: type Memory, range 32, base 0xff6ff000, size 12, enabled
pcib4: requested memory range 0xff6ff000-0xff6fffff: good
pcib3: requested memory range 0xff6ff000-0xff6fffff: good
map[18]: type I/O Port, range 32, base 0x9880, size 5, enabled
pcib4: requested I/O range 0x9880-0x989f: in range
pcib3: requested I/O range 0x9880-0x989f: in range
map[1c]: type Memory, range 32, base 0xff6fe000, size 12, enabled
pcib4: requested memory range 0xff6fe000-0xff6fefff: good
pcib3: requested memory range 0xff6fe000-0xff6fefff: good
pcib4: slot 0 INTA routed to irq 19
pci6: <simple comms, UART> at device 0.0 (no driver attached)
pci6: <simple comms, UART> at device 0.1 (no driver attached)
pcib5: <MPTable PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib5: domain 0
pcib5: secondary bus 4
pcib5: subordinate bus 4
pcib5: I/O decode 0x8000-0x8fff
pcib5: memory decode 0xff500000-0xff5fffff
pcib5: no prefetched decode
pci4: <PCI bus> on pcib5
pci4: domain=0, physical bus=4
found-> vendor=0x197b, dev=0x2363, revid=0x03
domain=0, bus=4, slot=0, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x8c00, size 3, enabled
pcib5: requested I/O range 0x8c00-0x8c07: in range
map[14]: type I/O Port, range 32, base 0x8880, size 2, enabled
pcib5: requested I/O range 0x8880-0x8883: in range
map[18]: type I/O Port, range 32, base 0x8800, size 3, enabled
pcib5: requested I/O range 0x8800-0x8807: in range
map[1c]: type I/O Port, range 32, base 0x8480, size 2, enabled
pcib5: requested I/O range 0x8480-0x8483: in range
map[20]: type I/O Port, range 32, base 0x8400, size 4, enabled
pcib5: requested I/O range 0x8400-0x840f: in range
map[24]: type Memory, range 32, base 0xff5fe000, size 13, enabled
pcib5: requested memory range 0xff5fe000-0xff5fffff: good
pcib5: slot 0 INTA routed to irq 16
atapci0: <JMicron JMB363 SATA300 controller> port
0x8c00-0x8c07,0x8880-0x8883,0x8800-0x8807,0x8480-0x8483,0x8400-0x840f
mem 0xff5fe000-0xff5fffff irq 16 at device 0.0 on pci4
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8400
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xff5fe000
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect status=00000000
ata2: ahci_reset devices=0x0
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect status=00000000
ata3: ahci_reset devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x8c00
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x8880
ata4: reset tp1 mask=03 ostat0=60 ostat1=70
ata4: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata4: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata4: reset tp2 stat0=20 stat1=30 devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
pcib6: <PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib6: domain 0
pcib6: secondary bus 2
pcib6: subordinate bus 3
pcib6: I/O decode 0x7000-0x7fff
pcib6: memory decode 0xff400000-0xff4fffff
pcib6: no prefetched decode
pci2: <PCI bus> on pcib6
pci2: domain=0, physical bus=2
found-> vendor=0x104c, dev=0x8231, revid=0x03
domain=0, bus=2, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0117, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 16 messages, 64 bit
pcib7: <MPTable PCI-PCI bridge> at device 0.0 on pci2
pcib7: domain 0
pcib7: secondary bus 3
pcib7: subordinate bus 3
pcib7: I/O decode 0x7000-0x7fff
pcib7: memory decode 0xff400000-0xff4fffff
pcib7: no prefetched decode
pci3: <PCI bus> on pcib7
pci3: domain=0, physical bus=3
found-> vendor=0x14d2, dev=0xa007, revid=0x00
domain=0, bus=3, slot=0, func=0
class=07-00-06, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 1 supports D0 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0x7800, size 5, enabled
pcib7: requested I/O range 0x7800-0x781f: in range
pcib6: requested I/O range 0x7800-0x781f: in range
map[14]: type Memory, range 32, base 0xff4fd000, size 12, enabled
pcib7: requested memory range 0xff4fd000-0xff4fdfff: good
pcib6: requested memory range 0xff4fd000-0xff4fdfff: good
map[18]: type I/O Port, range 32, base 0x7480, size 5, enabled
pcib7: requested I/O range 0x7480-0x749f: in range
pcib6: requested I/O range 0x7480-0x749f: in range
map[1c]: type Memory, range 32, base 0xff4fc000, size 12, enabled
pcib7: requested memory range 0xff4fc000-0xff4fcfff: good
pcib6: requested memory range 0xff4fc000-0xff4fcfff: good
pcib7: slot 0 INTA routed to irq 17
found-> vendor=0x14d2, dev=0xa008, revid=0x00
domain=0, bus=3, slot=0, func=1
class=07-00-06, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 1 supports D0 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0x7c00, size 5, enabled
pcib7: requested I/O range 0x7c00-0x7c1f: in range
pcib6: requested I/O range 0x7c00-0x7c1f: in range
map[14]: type Memory, range 32, base 0xff4ff000, size 12, enabled
pcib7: requested memory range 0xff4ff000-0xff4fffff: good
pcib6: requested memory range 0xff4ff000-0xff4fffff: good
map[18]: type I/O Port, range 32, base 0x7880, size 5, enabled
pcib7: requested I/O range 0x7880-0x789f: in range
pcib6: requested I/O range 0x7880-0x789f: in range
map[1c]: type Memory, range 32, base 0xff4fe000, size 12, enabled
pcib7: requested memory range 0xff4fe000-0xff4fefff: good
pcib6: requested memory range 0xff4fe000-0xff4fefff: good
pcib7: slot 0 INTA routed to irq 17
pci3: <simple comms, UART> at device 0.0 (no driver attached)
pci3: <simple comms, UART> at device 0.1 (no driver attached)
uhci2: <UHCI (generic) USB controller> port 0xd400-0xd41f irq 23 at
device 29.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 51
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xd480-0xd49f irq 19 at
device 29.1 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd480
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 52
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 18 at
device 29.2 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xff9fb400-0xff9fb7ff
irq 23 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xff9fb400
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: waiting for BIOS to give up control
usb6: timed out waiting for BIOS
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib8: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pcib8: domain 0
pcib8: secondary bus 8
pcib8: subordinate bus 8
pcib8: I/O decode 0xa000-0xbfff
pcib8: memory decode 0xff700000-0xff7fffff
pcib8: no prefetched decode
pcib8: Subtractively decoded bridge.
pci8: <PCI bus> on pcib8
pci8: domain=0, physical bus=8
found-> vendor=0x14d2, dev=0x8080, revid=0x00
domain=0, bus=8, slot=0, func=0
class=07-00-02, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=14
map[10]: type I/O Port, range 32, base 0xbc00, size 3, enabled
pcib8: requested I/O range 0xbc00-0xbc07: in range
map[14]: type I/O Port, range 32, base 0xb880, size 3, enabled
pcib8: requested I/O range 0xb880-0xb887: in range
map[18]: type I/O Port, range 32, base 0xb800, size 3, enabled
pcib8: requested I/O range 0xb800-0xb807: in range
map[1c]: type I/O Port, range 32, base 0xb480, size 3, enabled
pcib8: requested I/O range 0xb480-0xb487: in range
map[20]: type I/O Port, range 32, base 0xb400, size 6, enabled
pcib8: requested I/O range 0xb400-0xb43f: in range
pcib8: slot 0 INTA routed to irq 21
found-> vendor=0x10b7, dev=0x9200, revid=0x74
domain=0, bus=8, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xb080, size 7, enabled
pcib8: requested I/O range 0xb080-0xb0ff: in range
map[14]: type Memory, range 32, base 0xff7ffc00, size 7, enabled
pcib8: requested memory range 0xff7ffc00-0xff7ffc7f: good
pcib8: slot 1 INTA routed to irq 22
found-> vendor=0x1106, dev=0x3044, revid=0xc0
domain=0, bus=8, slot=3, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=14
powerspec 2 supports D0 D2 D3 current D0
map[10]: type Memory, range 32, base 0xff7ff000, size 11, enabled
pcib8: requested memory range 0xff7ff000-0xff7ff7ff: good
map[14]: type I/O Port, range 32, base 0xb000, size 7, enabled
pcib8: requested I/O range 0xb000-0xb07f: in range
pcib8: slot 3 INTA routed to irq 21
found-> vendor=0x11ab, dev=0x4320, revid=0x14
domain=0, bus=8, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns)
intpin=a, irq=15
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xff7f8000, size 14, enabled
pcib8: requested memory range 0xff7f8000-0xff7fbfff: good
map[14]: type I/O Port, range 32, base 0xa800, size 8, enabled
pcib8: requested I/O range 0xa800-0xa8ff: in range
pcib8: slot 4 INTA routed to irq 19
puc0: <Titan VScom PCI-800L> port
0xbc00-0xbc07,0xb880-0xb887,0xb800-0xb807,0xb480-0xb487,0xb400-0xb43f
irq 21 at device 0.0 on pci8
puc0: Reserved 0x8 bytes for rid 0x14 type 4 at 0xb880
puc0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xb800
puc0: Reserved 0x40 bytes for rid 0x20 type 4 at 0xb400
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 53
puc0: [FILTER]
uart0: <16550 or compatible> on puc0
uart0: [FILTER]
uart0: fast interrupt
uart1: <16550 or compatible> on puc0
uart1: [FILTER]
uart1: fast interrupt
uart2: <16550 or compatible> on puc0
uart2: [FILTER]
uart2: fast interrupt
uart3: <16550 or compatible> on puc0
uart3: [FILTER]
uart3: fast interrupt
uart4: <16550 or compatible> on puc0
uart4: [FILTER]
uart4: fast interrupt
uart5: <16550 or compatible> on puc0
uart5: [FILTER]
uart5: fast interrupt
uart6: <16550 or compatible> on puc0
uart6: [FILTER]
uart6: fast interrupt
uart7: <16550 or compatible> on puc0
uart7: [FILTER]
uart7: fast interrupt
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xb080-0xb0ff mem
0xff7ffc00-0xff7ffc7f irq 22 at device 1.0 on pci8
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xff7ffc00
xl0: using memory mapped I/O
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> PHY 24 on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:01:02:0b:19:c4
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
xl0: [MPSAFE]
xl0: [ITHREAD]
fwohci0: <VIA Fire II (VT6306)> port 0xb000-0xb07f mem
0xff7ff000-0xff7ff7ff irq 21 at device 3.0 on pci8
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xff7ff000
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:01:6f:84:48
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x12fc000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
skc0: <Marvell Gigabit Ethernet> port 0xa800-0xa8ff mem
0xff7f8000-0xff7fbfff irq 19 at device 4.0 on pci8
skc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xff7f8000
skc0: interrupt moderation is 100 us
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
skc0: chip ver = 0xb1
skc0: chip rev = 0x09
skc0: SK_EPROM0 = 0x10
skc0: SRAM size = 0x010000
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: bpf attached
sk0: Ethernet address: 00:1d:60:48:c2:80
miibus1: <MII bus> on sk0
e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
skc0: [MPSAFE]
skc0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH8 SATA300 controller> port
0xe880-0xe887,0xe800-0xe803,0xe480-0xe487,0xe400-0xe403,0xe080-0xe08f,0xe000-0xe00f
irq 19 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe080
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xe000
ata5: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xe880
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xe800
ata5: reset tp1 mask=03 ostat0=50 ostat1=00
ata5: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata5: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata5: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata5: [MPSAFE]
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xe480
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xe400
ata6: reset tp1 mask=03 ostat0=00 ostat1=00
ata6: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata6: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata6: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata6: [MPSAFE]
ata6: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH8 SATA300 controller> port
0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc80f,0xc480-0xc48f
irq 19 at device 31.5 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc800
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x10 bytes for rid 0x24 type 4 at 0xc480
ata7: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd080
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd000
ata7: reset tp1 mask=03 ostat0=7f ostat1=7f
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata7: reset tp2 stat0=ff stat1=ff devices=0x0
ata7: [MPSAFE]
ata7: [ITHREAD]
ata8: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xcc00
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc880
ata8: reset tp1 mask=03 ostat0=7f ostat1=7f
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata8: reset tp2 stat0=ff stat1=ff devices=0x0
ata8: [MPSAFE]
ata8: [ITHREAD]
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pnpbios: 16 devices, largest 238 bytes
PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00
PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400
PNP0c01: adding fixed memory32 range 0xe4000-0xfffff, size=0x1c000
PNP0c01: adding fixed memory32 range 0x100000-0x3e78ffff, size=0x3e690000
PNP0c01: adding fixed memory32 range 0x3e790000-0x3e79dfff, size=0xe000
PNP0c01: adding fixed memory32 range 0x3e79e000-0x3e7dffff, size=0x42000
PNP0c01: adding fixed memory32 range 0x3e7e0000-0x3e7fffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000
PNP0c01: adding fixed memory32 range 0xffb00000-0xffffffff, size=0x500000
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x80-0x90, size=0x11, align=0x1
PNP0200: adding io range 0x94-0x9f, size=0xc, align=0x1
PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0x1
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
pnpbios: handle 3 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
pnpbios: handle 4 device ID PNP0b00 (000bd041)
pnpbios: handle 5 device ID PNP0a03 (030ad041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 6 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
pnpbios: handle 8 device ID PNP0501 (0105d041)
PNP0c02: adding io range 0x290-0x297, size=0x8, align=0x8
pnpbios: handle 9 device ID PNP0c02 (020cd041)
INT0800: adding fixed memory32 range 0xffb00000-0xffffffff, size=0x500000
pnpbios: handle 10 device ID INT0800 (0008d425)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0c02: adding io range 0x72-0x75, size=0x4, align=0x1
PNP0c02: adding io range 0x480-0x4bf, size=0x40, align=0x1
PNP0c02: adding io range 0x800-0x87f, size=0x80, align=0x1
PNP0c02: adding io range 0x8f0-0x8ff, size=0x10, align=0x1
PNP0c02: adding io range 0x2e-0x2e, size=0x1, align=0x1
PNP0c02: adding io range 0x2f-0x2f, size=0x1, align=0x1
PNP0c02: adding fixed memory32 range 0xfed1c000-0xfed1ffff, size=0x4000
pnpbios: handle 11 device ID PNP0c02 (020cd041)
pnpbios: handle 12 device ID PNP0c02 (020cd041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcafff,0xcb000-0xcd7ff,0xcd800-0xcdfff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 56
ata1: [MPSAFE]
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0 failed to probe at port 0x3f8 irq 4 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9fbff pnpid PNP0c01 on isa0
unknown: <PNP0800> failed to probe at port 0x61 pnpid PNP0800 on isa0
uart8: <16550 or compatible> at port 0x3f8-0x3ff irq 4 pnpid PNP0501 on isa0
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
uart8: [FILTER]
uart8: fast interrupt
unknown: <INT0800> can't assign resources (memory)
unknown: <INT0800> pnpid INT0800 on isa0
ukbd0: <LITEON Technology USB Multimedia Keyboard, class 0/0, rev
1.10/1.01, addr 2> on uhub3
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 100313011 hz
Timecounter "TSC" frequency 1605008120 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad10: 152627MB <SAMSUNG HD160HJ BF100-12> at ata5-master SATA300
ad10: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad10
ad10: Intel check1 failed
ad10: Adaptec check1 failed
ad10: LSI (v3) check1 failed
ad10: LSI (v2) check1 failed
ad10: FreeBSD check1 failed
ata6: reiniting channel ..
ata6: reset tp1 mask=03 ostat0=00 ostat1=00
ata6: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata6: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata6: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata6: reinit done ..
ata6: reiniting channel ..
ata6: reset tp1 mask=03 ostat0=00 ostat1=00
ata6: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata6: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata6: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata6: reinit done ..
ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
acd0: <Optiarc DVD RW AD-7190S/1.01> DVDR drive at ata6 as master
acd0: read 8269KB/s (2067KB/s) write 8269KB/s (8269KB/s), 2048KB buffer, SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 17 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 1
ioapic0: Assigning PCI IRQ 21 to local APIC 0
ioapic0: Assigning PCI IRQ 22 to local APIC 1
ioapic0: Assigning PCI IRQ 23 to local APIC 0
Trying to mount root from ufs:/dev/ad10s1a
start_init: trying /sbin/init
sk0: link state changed to UP
Regards,
Maxim
2008/5/30 Remko Lodder <remko@freebsd.org>:
>
> Maxim Frolov wrote:
>
> Please submit a 'boot -v' or verbose boot in the boot options,
> and a pciconf -vl.
>
> Thanks.
>
> --
>
> /"\ Best regards, | remko@FreeBSD.org
> \ / Remko Lodder | remko@EFnet
> X http://www.evilcoder.org/ |
> / \ ASCII Ribbon Campaign | Against HTML Mail and News
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200806170850.m5H8o3Ic085394>