Date: Tue, 14 Jun 2022 19:58:41 +0200 From: Ronald Klop <ronald-lists@klop.ws> To: bob prohaska <fbsd@www.zefox.net>, Mark Millard <marklmi@yahoo.com> Cc: freebsd-arm@freebsd.org Subject: Re: Mountroot problems on RPi3/aarch64 Message-ID: <e25fae11-2474-fbb5-71cc-6d75eb5f387b@klop.ws> In-Reply-To: <20220613153325.GA12588@www.zefox.net> References: <20220601154142.GA41835@www.zefox.net> <5FA108CF-0973-4A53-A3B7-FA7BE41EB16D@yahoo.com> <20220601214401.GA42494@www.zefox.net> <20220602045202.GA44686@www.zefox.net> <1B845A0C-EDDC-407C-96A8-AAF4E92C2A4D@yahoo.com> <20220613153325.GA12588@www.zefox.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 6/13/22 17:33, bob prohaska wrote: > On Sat, Jun 11, 2022 at 06:52:42PM -0700, Mark Millard wrote: >> There was another UFS/FFS superblock integrity-check fix today. >> Time to try again? >> >> The fix was . . . >> >> The branch main has been updated by mckusick: >> >> URL: https://cgit.FreeBSD.org/src/commit/?id=800a53b445e7eb113ba193b1ac98631299178529 >> > > There still seems to be something wrong. It looked like git picked up the > change, but after a build/install cycle I'm still seeing: > > ..... > Root mount waiting for: CAM > Root mount waiting for: CAM > da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 > da0: <ASMT ASM105x 0> Fixed Direct Access SPC-4 SCSI device > da0: Serial Number 12345678D558 > da0: 40.000MB/s transfers > da0: 953869MB (1953525168 512 byte sectors) > da0: quirks=0x2<NO_6_BYTE> > Mounting from ufs:/dev/da0s2a failed with error 22; retrying for 3 more seconds > Mounting from ufs:/dev/da0s2a failed with error 22: Invalid fstype. > > Loader variables: > vfs.root.mountfrom=ufs:/dev/da0s2a > vfs.root.mountfrom.options=rw > > Manual root filesystem specification: > <fstype>:<device> [options] > Mount <device> using filesystem <fstype> > and with the specified (optional) option list. > > eg. ufs:/dev/da0s1a > zfs:zroot/ROOT/default > cd9660:/dev/cd0 ro > (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /) > > ? List valid disk boot devices > . Yield 1 second (for background tasks) > <empty line> Abort manual input > > mountroot> ufs:/dev/da0s2a > Trying to mount root from ufs:/dev/da0s2a []... > Mounting from ufs:/dev/da0s2a failed with error 22; retrying for 3 more seconds > Mounting from ufs:/dev/da0s2a failed with error 22: Invalid fstype. > > As earlier, hitting [enter] at the mountroot> prompt starts the debugger. > > Booting a kernel from main-n255816-e26ef41f799 goes straight to single-user: > > OK boot kernel.0529 > Loading kernel... > /boot/kernel.0529/kernel text=0x2a8 text=0x82ccb0 text=0x24c4a4 data=0x1b9f38 data=0x0+0x34e000 syms=[0x8+0x132f18+0x8+0x15ac23] > Loading configured modules... > /boot/kernel.0529/filemon.ko text=0x1867 text=0x19b8 data=0x510+0x20 syms=[0x8+0xd38+0x8+0x7ea] > /boot/kernel.0529/umodem.ko text=0x20e0 text=0x1360 data=0x6d8+0x4 syms=[0x8+0xee8+0x8+0xb46] > /boot/entropy size=0x1000 > /etc/hostid size=0x25 > Using DTB provided by EFI at 0x7ef5000. > EFI framebuffer information: > addr, size 0x3eaf0000, 0x10a800 > dimensions 656 x 416 > stride 656 > masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000 > ---<<BOOT>>--- > GDB: debug ports: uart > GDB: current port: uart > KDB: debugger backends: ddb gdb > KDB: current backend: ddb > WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance > Copyright (c) 1992-2022 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 14.0-CURRENT #74 main-n255816-e26ef41f799: Wed May 25 15:05:14 PDT 2022 > bob@www.zefox.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 > FreeBSD clang version 14.0.3 (https://github.com/llvm/llvm-project.git llvmorg-14.0.3-0-g1f9140064dfb) > WARNING: WITNESS option enabled, expect reduced performance. > VT(efifb): resolution 656x416 > module firmware already present! > KLD file umodem.ko is missing dependencies > real memory = 993984512 (947 MB) > avail memory = 944148480 (900 MB) > Starting CPU 1 (1) > Starting CPU 2 (2) > Starting CPU 3 (3) > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > random: unblocking device. > random: entropy device external interface > MAP 39f34000 mode 2 pages 1 > MAP 39f38000 mode 2 pages 3 > MAP 39f3c000 mode 2 pages 4 > MAP 3b350000 mode 2 pages 16 > MAP 3f100000 mode 0 pages 1 > kbd0 at kbdmux0 > ofwbus0: <Open Firmware Device Tree> > simplebus0: <Flattened device tree simple bus> on ofwbus0 > ofw_clkbus0: <OFW clocks bus> on ofwbus0 > clk_fixed0: <Fixed clock> on ofw_clkbus0 > clk_fixed1: <Fixed clock> on ofw_clkbus0 > regfix0: <Fixed Regulator> on ofwbus0 > regfix1: <Fixed Regulator> on ofwbus0 > bcm2835_firmware0: <BCM2835 Firmware> on simplebus0 > ofw_clkbus1: <OFW clocks bus> on bcm2835_firmware0 > psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 > lintc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0 > intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 39 on simplebus0 > gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 7,8 on simplebus0 > gpiobus0: <OFW GPIO bus> on gpio0 > gpio1: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0 > gpiobus1: <GPIO bus> on gpio1 > mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 6 on simplebus0 > generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0 > Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000 > Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000 > usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 > bcm2835_clkman0: <BCM283x Clock Manager> mem 0x7e101000-0x7e102fff on simplebus0 > gpioc0: <GPIO controller> on gpio0 > uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 9 on simplebus0 > uart0: console (115200,n,8,1) > spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 11 on simplebus0 > spibus0: <OFW SPI bus> on spi0 > spibus0: <unknown card> at cs 0 mode 0 > spibus0: <unknown card> at cs 1 mode 0 > iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 19 on simplebus0 > bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 21,22 on simplebus0 > usbus1 on bcm283x_dwcotg0 > bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38 on simplebus0 > bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023 on simplebus0 > bcmrng0: <Broadcom BCM2835/BCM2838 RNG> mem 0x7e104000-0x7e10400f irq 40 on simplebus0 > sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 48 on simplebus0 > mmc0: <MMC/SD bus> on sdhci_bcm0 > gpioc1: <GPIO controller> on gpio1 > fb0: <BCM2835 VT framebuffer driver> on simplebus0 > fb0: keeping existing fb bpp of 32 > fbd0 on fb0 > WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. > VT: Replacing driver "efifb" with new "fb". > fb0: 656x416(656x416@0,0) 32bpp > fb0: fbswap: 1, pitch 2624, base 0x3eaf0000, screen_size 1091584 > pmu0: <Performance Monitoring Unit> irq 0 on ofwbus0 > cpulist0: <Open Firmware CPU Group> on ofwbus0 > cpu0: <Open Firmware CPU> on cpulist0 > bcm2835_cpufreq0: <CPU Frequency Control> on cpu0 > cpu1: <Open Firmware CPU> on cpulist0 > cpu2: <Open Firmware CPU> on cpulist0 > cpu3: <Open Firmware CPU> on cpulist0 > gpioled0: <GPIO LEDs> on ofwbus0 > gpioled0: <led0> failed to map pin > lock order reversal: (sleepable after non-sleepable) > 1st 0xffff000000c49aa0 LED mtx (LED mtx, sleep mutex) @ /usr/src/sys/dev/led/led.c:298 > 2nd 0xffffa00000dc1c10 Raspberry Pi firmware gpio (Raspberry Pi firmware gpio, sx) @ /usr/src/sys/arm/broadcom/bcm2835/raspberrypi_gpio.c:252 > lock order LED mtx -> Raspberry Pi firmware gpio attempted at: > #0 0xffff0000004c9024 at witness_checkorder+0xadc > #1 0xffff000000464638 at _sx_xlock+0x7c > #2 0xffff0000007e1e3c at rpi_fw_gpio_pin_set+0xe8 > #3 0xffff0000001c9378 at led_create_state+0x158 > #4 0xffff0000001950ec at gpioled_attach+0x290 > #5 0xffff000000494328 at device_attach+0x3f8 > #6 0xffff000000493e98 at device_probe_and_attach+0x7c > #7 0xffff0000004961e4 at bus_generic_new_pass+0xfc > #8 0xffff000000496194 at bus_generic_new_pass+0xac > #9 0xffff000000496194 at bus_generic_new_pass+0xac > #10 0xffff00000049110c at bus_set_pass+0x4c > #11 0xffff0000003e2ab0 at mi_startup+0x1fc > #12 0xffff0000000008b8 at virtdone+0x7c > uma_zalloc_debug: zone "malloc-64" with the following non-sleepable locks held: > exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000c49aa0) locked @ /usr/src/sys/dev/led/led.c:298 > stack backtrace: > #0 0xffff0000004c9470 at witness_debugger+0x5c > #1 0xffff0000004ca66c at witness_warn+0x400 > #2 0xffff0000006f8224 at uma_zalloc_debug+0x30 > #3 0xffff0000006f7d98 at uma_zalloc_arg+0x2c > #4 0xffff00000042e230 at malloc+0x94 > #5 0xffff0000007d70a8 at bcm2835_firmware_property+0x44 > #6 0xffff0000007e1e54 at rpi_fw_gpio_pin_set+0x100 > #7 0xffff0000001c9378 at led_create_state+0x158 > #8 0xffff0000001950ec at gpioled_attach+0x290 > #9 0xffff000000494328 at device_attach+0x3f8 > #10 0xffff000000493e98 at device_probe_and_attach+0x7c > #11 0xffff0000004961e4 at bus_generic_new_pass+0xfc > #12 0xffff000000496194 at bus_generic_new_pass+0xac > #13 0xffff000000496194 at bus_generic_new_pass+0xac > #14 0xffff00000049110c at bus_set_pass+0x4c > #15 0xffff0000003e2ab0 at mi_startup+0x1fc > #16 0xffff0000000008b8 at virtdone+0x7c > uma_zalloc_debug: zone "malloc-16" with the following non-sleepable locks held: > exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000c49aa0) locked @ /usr/src/sys/dev/led/led.c:298 > stack backtrace: > #0 0xffff0000004c9470 at witness_debugger+0x5c > #1 0xffff0000004ca66c at witness_warn+0x400 > #2 0xffff0000006f8224 at uma_zalloc_debug+0x30 > #3 0xffff0000006f7d98 at uma_zalloc_arg+0x2c > #4 0xffff00000042e230 at malloc+0x94 > #5 0xffff000000742d88 at bounce_bus_dmamem_alloc+0x50 > #6 0xffff0000007d9b24 at bcm2835_mbox_property+0xdc > #7 0xffff0000007d70dc at bcm2835_firmware_property+0x78 > #8 0xffff0000007e1e54 at rpi_fw_gpio_pin_set+0x100 > #9 0xffff0000001c9378 at led_create_state+0x158 > #10 0xffff0000001950ec at gpioled_attach+0x290 > #11 0xffff000000494328 at device_attach+0x3f8 > #12 0xffff000000493e98 at device_probe_and_attach+0x7c > #13 0xffff0000004961e4 at bus_generic_new_pass+0xfc > #14 0xffff000000496194 at bus_generic_new_pass+0xac > #15 0xffff000000496194 at bus_generic_new_pass+0xac > #16 0xffff00000049110c at bus_set_pass+0x4c > #17 0xffff0000003e2ab0 at mi_startup+0x1fc > uma_zalloc_debug: zone "malloc-128" with the following non-sleepable locks held: > exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000c49aa0) locked @ /usr/src/sys/dev/led/led.c:298 > stack backtrace: > #0 0xffff0000004c9470 at witness_debugger+0x5c > #1 0xffff0000004ca66c at witness_warn+0x400 > #2 0xffff0000006f8224 at uma_zalloc_debug+0x30 > #3 0xffff0000006f7d98 at uma_zalloc_arg+0x2c > #4 0xffff00000042e230 at malloc+0x94 > #5 0xffff000000742dd8 at bounce_bus_dmamem_alloc+0xa0 > #6 0xffff0000007d9b24 at bcm2835_mbox_property+0xdc > #7 0xffff0000007d70dc at bcm2835_firmware_property+0x78 > #8 0xffff0000007e1e54 at rpi_fw_gpio_pin_set+0x100 > #9 0xffff0000001c9378 at led_create_state+0x158 > #10 0xffff0000001950ec at gpioled_attach+0x290 > #11 0xffff000000494328 at device_attach+0x3f8 > #12 0xffff000000493e98 at device_probe_and_attach+0x7c > #13 0xffff0000004961e4 at bus_generic_new_pass+0xfc > #14 0xffff000000496194 at bus_generic_new_pass+0xac > #15 0xffff000000496194 at bus_generic_new_pass+0xac > #16 0xffff00000049110c at bus_set_pass+0x4c > #17 0xffff0000003e2ab0 at mi_startup+0x1fc > uma_zalloc_debug: zone "malloc-64" with the following non-sleepable locks held: > exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000c49aa0) locked @ /usr/src/sys/dev/led/led.c:298 > stack backtrace: > #0 0xffff0000004c9470 at witness_debugger+0x5c > #1 0xffff0000004ca66c at witness_warn+0x400 > #2 0xffff0000006f8224 at uma_zalloc_debug+0x30 > #3 0xffff0000006f7d98 at uma_zalloc_arg+0x2c > #4 0xffff00000042e230 at malloc+0x94 > #5 0xffff000000742e60 at bounce_bus_dmamem_alloc+0x128 > #6 0xffff0000007d9b24 at bcm2835_mbox_property+0xdc > #7 0xffff0000007d70dc at bcm2835_firmware_property+0x78 > #8 0xffff0000007e1e54 at rpi_fw_gpio_pin_set+0x100 > #9 0xffff0000001c9378 at led_create_state+0x158 > #10 0xffff0000001950ec at gpioled_attach+0x290 > #11 0xffff000000494328 at device_attach+0x3f8 > #12 0xffff000000493e98 at device_probe_and_attach+0x7c > #13 0xffff0000004961e4 at bus_generic_new_pass+0xfc > #14 0xffff000000496194 at bus_generic_new_pass+0xac > #15 0xffff000000496194 at bus_generic_new_pass+0xac > #16 0xffff00000049110c at bus_set_pass+0x4c > #17 0xffff0000003e2ab0 at mi_startup+0x1fc > armv8crypto0: CPU lacks AES instructions > Timecounters tick every 1.000 msec > usbus1: 480Mbps High Speed USB v2.0 > iicbus0: <OFW I2C bus> on iichb0 > iic0: <I2C generic I/O> on iicbus0 > ugen1.1: <DWCOTG OTG Root HUB> at usbus1 > uhub0 on usbus1 > uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 > mmcsd0: 64GB <SDHC EC2QT 3.0 SN 529453E5 MFG 08/2019 by 27 SM> at mmc0 50.0MHz/4bit/65535-block > bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF > CPU 0: ARM Cortex-A53 r0p4 affinity: 0 > Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> > Instruction Set Attributes 0 = <CRC32> > Instruction Set Attributes 1 = <> > Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> > Processor Features 1 = <> > Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> > Trying to mount root from ufs:/dev/da0s2a [rw]... > Memory Model Features 1 = <8bit VMID> > Memory Model Features 2 = <32bit CCIDX,48bit VA> > Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> > Debug Features 1 = <> > Auxiliary Features 0 = <> > Auxiliary Features 1 = <> > AArch32 Instruction Set Attributes 5 = <CRC32,SEVL> > AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD> > AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP DP Conv,SIMDHP SP Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ> > CPU 1: ARM Cortex-A53 r0p4 affinity: 1 > CPU 2: ARM Cortex-A53 r0p4 affinity: 2 > CPU 3: ARM Cortex-A53 r0p4 affinity: 3 > Release APs...done > WARNING: WITNESS option enabled, expect reduced performance. > uhub0: 1 port with 1 removable, self powered > ugen1.2: <vendor 0x0424 product 0x9514> at usbus1 > uhub1 on uhub0 > uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus1 > uhub1: MTT enabled > Root mount waiting for: usbus1 CAM > uhub1: 5 ports with 4 removable, self powered > ugen1.3: <vendor 0x0424 product 0xec00> at usbus1 > smsc0 on uhub1 > smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus1 > smsc0: chip 0xec00, rev. 0002 > miibus0: <MII bus> on smsc0 > smscphy0: <SMC LAN8700 10/100 interface> PHY 1 on miibus0 > smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > ue0: <USB Ethernet> on smsc0 > ue0: Ethernet address: b8:27:eb:71:46:4e > Root mount waiting for: usbus1 CAM > ugen1.4: <VIA Labs, Inc. USB2.0 Hub> at usbus1 > uhub2 on uhub1 > uhub2: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.70, addr 4> on usbus1 > uhub2: 4 ports with 4 removable, self powered > Root mount waiting for: usbus1 CAM > Root mount waiting for: usbus1 CAM > usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device ASMT ASM105x (0x174c:0x55aa) > ugen1.5: <ASMT ASM105x> at usbus1 > umass0 on uhub2 > umass0: <ASMT ASM105x, class 0/0, rev 2.10/1.00, addr 5> on usbus1 > umass0: SCSI over Bulk-Only; quirks = 0x0100 > umass0:0:0: Attached to scbus0 > ugen1.6: <FTDI FT232R USB UART> at usbus1 > Root mount waiting for: CAM > Root mount waiting for: CAM > Root mount waiting for: CAM > ugen1.5: <ASMT ASM105x> at usbus1 (disconnected) > umass0: at uhub2, port 4, addr 5 (disconnected) > umass0: detached > Root mount waiting for: CAM > usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device ASMT ASM105x (0x174c:0x55aa) > ugen1.5: <ASMT ASM105x> at usbus1 > umass0 on uhub2 > umass0: <ASMT ASM105x, class 0/0, rev 2.10/1.00, addr 5> on usbus1 > umass0: SCSI over Bulk-Only; quirks = 0x0100 > umass0:0:0: Attached to scbus0 > Root mount waiting for: CAM > Root mount waiting for: CAM > Root mount waiting for: CAM > Root mount waiting for: CAM > Root mount waiting for: CAM > Root mount waiting for: CAM > Root mount waiting for: CAM > Root mount waiting for: CAM > Root mount waiting for: CAM > Root mount waiting for: CAM > da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 > da0: <ASMT ASM105x 0> Fixed Direct Access SPC-4 SCSI device > da0: Serial Number 12345678D558 > da0: 40.000MB/s transfers > da0: 953869MB (1953525168 512 byte sectors) > da0: quirks=0x2<NO_6_BYTE> > Warning: no time-of-day clock registered, system time will not be set accurately > Dual Console: Serial Primary, Video Secondary > Setting hostuuid: 30303030-3030-3030-3064-626136386435. > Setting hostid: 0x5cd40a6a. > Starting file system checks: > Cannot find file system superblock > Cannot find file system superblock > Warning! Some of the devices might not be available; retrying > Restarting file system checks: > Cannot find file system superblock > Cannot find file system superblock > Unknown error 3; help! > ERROR: ABORTING BOOT (sending SIGTERM to parent)! > 2022-06-13T08:05:20.701056-07:00 - init 1 - - /bin/sh on /etc/rc terminated abnormally, going to single user mode > Enter full pathname of shell or RETURN for /bin/sh: > root@:/ # uname -a > FreeBSD 14.0-CURRENT FreeBSD 14.0-CURRENT #74 main-n255816-e26ef41f799: Wed May 25 15:05:14 PDT 2022 bob@www.zefox.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 > root@:/ # > root@:/ # fsck > Cannot find file system superblock > Cannot find file system superblock > > LOOK FOR ALTERNATE SUPERBLOCKS? no > > root@:/ # > root@:/ # fsck -y > Cannot find file system superblock > Cannot find file system superblock > > LOOK FOR ALTERNATE SUPERBLOCKS? no > > Indeed, it looks as if the -y option of fsck is now gone..... > Yet, somewhat astonishingly: > > Hi, Do you have a mix up with labels and partitions/slices on your disk? Could it be that a label was written over a filesystem and instead of mounting from the label your are mounting the corrupted filesystem. Regards, Ronald. > root@:/ # exit > Setting hostuuid: 30303030-3030-3030-3064-626136386435. > Setting hostid: 0x5cd40a6a. > Fast boot: skipping disk checks. > Mounting local filesystems:. > ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/perl5/5.32/mach/CORE /usr/local/llvm10/lib > Setting hostname: www.zefox.org. > Setting up harvesting: [CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED > Feeding entropy: . > lo0: link state changed to UP > smsc0: chip 0xec00, rev. 0002 > ue0: link state changed to DOWN > ue0: link state changed to UP > Starting Network: lo0 ue0. > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 > inet 127.0.0.1 netmask 0xff000000 > groups: lo > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=80009<RXCSUM,VLAN_MTU,LINKSTATE> > ether b8:27:eb:71:46:4e > inet 50.1.20.28 netmask 0xffffff00 broadcast 50.1.20.255 > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > Starting devd. > Autoloading module: uftdi.ko > uftdi0 on uhub1 > uftdi0: <FT232R USB UART> on usbus1 > add host 127.0.0.1: gateway lo0 fib 0: route already in table > add net default: gateway 50.1.20.1 > add host ::1: gateway lo0 fib 0: route already in table > add net fe80::: gateway ::1 > add net ff02::: gateway ::1 > add net ::ffff:0.0.0.0: gateway ::1 > add net ::0.0.0.0: gateway ::1 > Updating motd:. > Creating and/or trimming log files. > Updating /var/run/os-release done. > Starting syslogd. > Clearing /tmp (X related). > No core dumps found. > Setting date via ntp. > 13 Jun 08:22:48 ntpdate[875]: step time server 86.3.245.8 offset -24453.100209 sec > Mounting late filesystems:. > Starting powerd. > Starting sendmail. > Starting sendmail_msp_queue. > Starting cron. > Performing sanity check on sshd configuration. > Starting sshd. > Configuring vt: blanktime. > Starting background file system checks in 60 seconds. > > Mon Jun 13 08:23:00 PDT 2022 > > FreeBSD/arm64 (www.zefox.org) (ttyu0) > > login: > > at which point it's possible to run well enough to update and recompile. > Seemingly this is a local problem unique to my systems. In the meantime > I'll try another git pull and recompile.... > > Thanks for writing! > > bob prohaska > > > > > > >> commit 800a53b445e7eb113ba193b1ac98631299178529 >> Author: Kirk McKusick <mckusick@FreeBSD.org> >> AuthorDate: 2022-06-11 18:04:19 +0000 >> Commit: Kirk McKusick <mckusick@FreeBSD.org> >> CommitDate: 2022-06-11 18:05:14 +0000 >> >> Bug fix to UFS/FFS superblock integrity checks when reading a superblock. >> >> One of the checks was that the cylinder group size (fs_cgsize) >> matched that calculated by CGSIZE(). The value calculated by CGSIZE() >> has changed over time as the filesystem has evolved. Thus comparing >> the value of CGSIZE() of the current generation filesystem may not >> match the size as computed by CGSIZE() that was in effect at the >> time an older filesystem was created. Therefore the check for >> fs_cgsize is changed to simply ensure that it is not larger than >> the filesystem blocksize (fs_bsize). >> >> Reported by: Martin Birgmeier >> Tested by: Martin Birgmeier >> MFC after: 1 month (with 076002f24d35) >> PR: 264450 >> Differential Revision: https://reviews.freebsd.org/D35219 >> --- >> sys/ufs/ffs/ffs_subr.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/sys/ufs/ffs/ffs_subr.c b/sys/ufs/ffs/ffs_subr.c >> index f25a6cba12f4..3e31746c2cfc 100644 >> --- a/sys/ufs/ffs/ffs_subr.c >> +++ b/sys/ufs/ffs/ffs_subr.c >> @@ -385,7 +385,7 @@ validate_sblock(struct fs *fs, int isaltsblk) >> roundup(howmany(SBLOCKSIZE, fs->fs_fsize), fs->fs_frag) || >> fs->fs_iblkno != fs->fs_cblkno + fs->fs_frag || >> fs->fs_dblkno != fs->fs_iblkno + fs->fs_ipg / INOPF(fs) || >> - fs->fs_cgsize != fragroundup(fs, CGSIZE(fs))) >> + fs->fs_cgsize > fs->fs_bsize) >> return (ENOENT); >> if (fs->fs_csaddr != cgdmin(fs, 0) || >> fs->fs_cssize != >> >> >> === >> Mark Millard >> marklmi at yahoo.com >> >> >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?e25fae11-2474-fbb5-71cc-6d75eb5f387b>