Date: Sat, 5 Jan 2008 17:21:09 +0200 (EET) From: Mario Pavlov <freebsd@abv.bg> To: freebsd-amd64@freebsd.org Subject: Re: ata(4) problem (unable to burn CDs) Message-ID: <2036365664.292711.1199546469974.JavaMail.nobody@mail51.abv.bg>
next in thread | raw e-mail | index | archive | help
an important detail that I forgot to mention is that my DVD burner is SATA >Hi guys, >I'm experiencing problems with my DVD burner. I can't burn CDs. >When I start k3b and load some data and start the burning it just never starts writing and I'm getting the fallowing errors in the messages log > >************************************************************************************************************************ >Jan 5 09:59:15 e-soul kernel: acd0: FAILURE - READ_DVD_STRUCTURE ILLEGAL REQUEST asc=0x30 ascq=0x02 >Jan 5 09:59:15 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >Jan 5 09:59:17 e-soul last message repeated 3 times >Jan 5 09:59:19 e-soul kernel: acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >Jan 5 09:59:19 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >Jan 5 09:59:19 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >Jan 5 10:02:45 e-soul kernel: acd0: FAILURE - WRITE_BIG timed out >Jan 5 10:06:17 e-soul kernel: acd0: FAILURE - WRITE_BIG timed out >Jan 5 10:06:25 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >Jan 5 10:06:25 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >************************************************************************************************************************ > > >and this is the k3b debug output after I hit cancel > > >************************************************************************************************************************ >System >----------------------- >K3b Version: 1.0.4 > >KDE Version: 3.5.8 >QT Version: 3.3.8 >Kernel: 7.0-PRERELEASE >Devices >----------------------- >HL-DT-ST DVDRAM GSA-H62N CL00 (/dev/cd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] > >Used versions >----------------------- >cdrecord: 2.1 > >cdrecord >----------------------- >/usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler >/usr/local/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority(). >/usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer underruns. >scsidev: '4,0,0' >scsibus: 4 target: 0 lun: 0 >SCSI buffer size: 64512 >/usr/local/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. >/usr/local/bin/cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD. >/usr/local/bin/cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/ >Cdrecord-Clone 2.01 (amd64-unknown-freebsd7.0) Copyright (C) 1995-2004 Jörg Schilling >TOC Type: 1 = CD-ROM >Using libscg version 'schily-0.8'. >Driveropts: 'burnfree' >atapi: 0 >Device type : Removable CD-ROM >Version : 0 >Response Format: 2 >Capabilities : >Vendor_info : 'HL-DT-ST' >Identifikation : 'DVDRAM GSA-H62N ' >Revision : 'CL00' >Device seems to be: Generic mmc2 DVD-R/DVD-RW. >Current: 0x0009 >Profile: 0x0012 >Profile: 0x0011 >Profile: 0x0015 >Profile: 0x0016 >Profile: 0x0014 >Profile: 0x0013 >Profile: 0x001A >Profile: 0x001B >Profile: 0x002B >Profile: 0x0010 >Profile: 0x0009 (current) >Profile: 0x000A >Profile: 0x0008 >Profile: 0x0002 >Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). >Driver flags : MMC-3 SWABAUDIO BURNFREE >Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R >Drive buf size : 1053696 = 1029 KB >Drive DMA Speed: 5634 kB/s 32x CD 4x DVD >FIFO size : 4194304 = 4096 KB >/usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler >/usr/local/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority(). >/usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer underruns. >/usr/local/bin/cdrecord: DMA speed too slow (OK for 26x). Cannot write at speed 48x. >Track 01: data 671 MB >Total size: 770 MB (76:22.93) = 343720 sectors >Lout start: 771 MB (76:24/70) = 343720 sectors >Current Secsize: 2048 >ATIP info from disk: > Indicated writing power: 4 > Is not unrestricted > Is not erasable > Disk sub type: Medium Type A, low Beta category (A-) (2) > ATIP start of lead in: -12508 (97:15/17) > ATIP start of lead out: 359845 (79:59/70) >Disk type: Short strategy type (Phthalocyanine or similar) >Manuf. index: 22 >Manufacturer: Ritek Co. >Blocks total: 359845 Blocks current: 359845 Blocks remaining: 16125 >Starting to write CD/DVD at speed 48 in real SAO mode for single session. >Last chance to quit, starting real write in 2 seconds. > 1 seconds. > 0 seconds. Operation starts. >Waiting for reader process to fill input buffer ... input buffer ready. >BURN-Free is ON. >Performing OPC... >Sending CUE sheet... >/usr/local/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150 >/usr/local/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: cmd timeout after 206.695 (200) s >CDB: 2A 00 FF FF FF 6A 00 00 1F 00 >cmd finished after 206.695s timeout 200s >/usr/local/bin/cdrecord: Input/output error. read buffer cap: scsi sendcmd: retryable error >CDB: 5C 00 00 00 00 00 00 00 0C 00 >status: 0x2 (CHECK CONDITION) >Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 80 29 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >Sense Key: 0x6 Unit Attention, Segment 0 >Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0x0 >Sense flags: Blk 0 (not valid) >cmd finished after 5.095s timeout 200s >Writing pregap for track 1 at -150 >write track pad data: error after 0 bytes >Starting new track at sector: 0 >Track 01: 0 of 671 MB written. >/usr/local/bin/cdrecord: faio_wait_on_buffer for writer timed out. >/usr/local/bin/cdrecord: Caught interrupt. >Track 01: data 671 MB >Total size: 770 MB (76:22.93) = 343720 sectors >Lout start: 771 MB (76:24/70) = 343720 sectors >Current Secsize: 2048 >ATIP info from disk: > Indicated writing power: 4 > Is not unrestricted > Is not erasable > Disk sub type: Medium Type A, low Beta category (A-) (2) > ATIP start of lead in: -12508 (97:15/17) > ATIP start of lead out: 359845 (79:59/70) >Disk type: Short strategy type (Phthalocyanine or similar) >Manuf. index: 22 >Manufacturer: Ritek Co. >Blocks total: 359845 Blocks current: 359845 Blocks remaining: 16125 >Writing time: 426.405s >/usr/local/bin/cdrecord: fifo had 64 puts and 1 gets. >/usr/local/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. > >cdrecord command: >----------------------- >/usr/local/bin/cdrecord -v gracetime=2 dev=4,0,0 speed=48 -dao driveropts=burnfree -eject -data -tsize=343720s - >************************************************************************************************************************ > > >cdrecord is complaining about permissions but I have this in /etc/devfs.conf > > >************************************************************************************************************************ >perm cdrom 0666 >own cdrom root:operator >link cd0 cdwriter >perm cdwriter 0666 >own cdwriter root:operator >perm pass0 0666 >own pass0 root:operator >perm xpt0 0666 >own xpt0 root:operator >************************************************************************************************************************ > > >and also > > >************************************************************************************************************************ >$ ls -l acd0 cd0 pass0 xpt0 >crw-rw-rw- 1 root operator 0, 101 Jan 4 20:59 acd0 >crw-rw-rw- 1 root operator 0, 104 Jan 4 20:59 cd0 >crw-rw-rw- 1 root operator 0, 100 Jan 4 20:59 pass0 >crw-rw-rw- 1 root operator 0, 81 Jan 4 20:59 xpt0 >************************************************************************************************************************ > > >I have atapicam compiled in the kernel >I've found similar problem reported in the freebsd-stable mailing list >here is the thread http://lists.freebsd.org/pipermail/freebsd-stable/2007-May/035257.html > >I'm running the latest code from RELENG_7 for amd64 > > >************************************************************************************************************************ >$ uname -a >FreeBSD e-soul.org 7.0-PRERELEASE FreeBSD 7.0-PRERELEASE #6: Fri Jan 4 12:27:16 EET 2008 root@e-soul.org:/usr/obj/usr/src/sys/Ss amd64 >************************************************************************************************************************ > > >************************************************************************************************************************ >$ dmesg >Copyright (c) 1992-2008 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD is a registered trademark of The FreeBSD Foundation. >FreeBSD 7.0-PRERELEASE #6: Fri Jan 4 12:27:16 EET 2008 > root@e-soul.org:/usr/obj/usr/src/sys/Ss >Timecounter "i8254" frequency 1193182 Hz quality 0 >CPU: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz (2206.71-MHz K8-class CPU) > Origin = "GenuineIntel" Id = 0x6fd Stepping = 13 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> > AMD Features=0x20100800<SYSCALL,NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 2 >usable memory = 4285259776 (4086 MB) >avail memory = 4084604928 (3895 MB) >ACPI APIC Table: <MSTEST OEMAPIC > >FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 >ioapic0 <Version 2.0> irqs 0-23 on motherboard >kbd1 at kbdmux0 >acpi0: <MSTEST OEMXSDT> on motherboard >acpi0: [ITHREAD] >acpi0: Power Button (fixed) >acpi0: reservation of 0, a0000 (3) failed >acpi0: reservation of 100000, 7ff00000 (3) failed >Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 >acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 >Timecounter "HPET" frequency 14318180 Hz quality 900 >cpu0: <ACPI CPU> on acpi0 >ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - EB, should be E6 [20070320] >est0: <Enhanced SpeedStep Frequency Control> on cpu0 >est: CPU supports Enhanced Speedstep, but is not recognized. >est: cpu_vendor GenuineIntel, msr b280b2806000b28 >device_attach: est0 attach returned 6 >p4tcc0: <CPU Frequency Thermal Control> on cpu0 >cpu1: <ACPI CPU> on acpi0 >est1: <Enhanced SpeedStep Frequency Control> on cpu1 >est: CPU supports Enhanced Speedstep, but is not recognized. >est: cpu_vendor GenuineIntel, msr b280b2806000b28 >device_attach: est1 attach returned 6 >p4tcc1: <CPU Frequency Thermal Control> on cpu1 >pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >pci0: <ACPI PCI bus> on pcib0 >pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 >pci1: <ACPI PCI bus> on pcib1 >vgapci0: <VGA-compatible display> port 0x8c00-0x8c7f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1 >uhci0: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 16 at device 26.0 on pci0 >uhci0: [GIANT-LOCKED] >uhci0: [ITHREAD] >usb0: <UHCI (generic) USB controller> on uhci0 >usb0: USB revision 1.0 >uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 >uhub0: 2 ports with 2 removable, self powered >uhci1: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 17 at device 26.1 on pci0 >uhci1: [GIANT-LOCKED] >uhci1: [ITHREAD] >usb1: <UHCI (generic) USB controller> on uhci1 >usb1: USB revision 1.0 >uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 >uhub1: 2 ports with 2 removable, self powered >ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 18 at device 26.7 on pci0 >ehci0: [GIANT-LOCKED] >ehci0: [ITHREAD] >usb2: waiting for BIOS to give up control >usb2: EHCI version 1.0 >usb2: companion controllers, 2 ports each: usb0 usb1 >usb2: <EHCI (generic) USB 2.0 controller> on ehci0 >usb2: USB revision 2.0 >uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 >uhub2: 4 ports with 4 removable, self powered >pcm0: <Intel 82801H High Definition Audio Controller> mem 0xfebf8000-0xfebfbfff irq 22 at device 27.0 on pci0 >pcm0: [ITHREAD] >pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 >pci4: <ACPI PCI bus> on pcib2 >pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 >pci3: <ACPI PCI bus> on pcib3 >re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xa800-0xa8ff mem 0xfe9ff000-0xfe9fffff irq 19 at device 0.0 on pci3 >re0: Using 2 MSI messages >miibus0: <MII bus> on re0 >rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 >rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto >re0: Ethernet address: 00:1d:60:2a:4f:56 >re0: [FILTER] >re0: [FILTER] >pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 >pci2: <ACPI PCI bus> on pcib4 >atapci0: <JMicron JMB363 SATA300 controller> port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x940f mem 0xfe8fe000-0xfe8fffff irq 16 at device 0.0 on pci2 >atapci0: [ITHREAD] >atapci0: AHCI called from vendor specific driver >atapci0: AHCI Version 01.00 controller with 2 ports detected >ata2: <ATA channel 0> on atapci0 >ata2: [ITHREAD] >ata3: <ATA channel 1> on atapci0 >ata3: [ITHREAD] >ata4: <ATA channel 2> on atapci0 >ata4: [ITHREAD] >uhci2: <UHCI (generic) USB controller> port 0xd480-0xd49f irq 23 at device 29.0 on pci0 >uhci2: [GIANT-LOCKED] >uhci2: [ITHREAD] >usb3: <UHCI (generic) USB controller> on uhci2 >usb3: USB revision 1.0 >uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 >uhub3: 2 ports with 2 removable, self powered >uhci3: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 19 at device 29.1 on pci0 >uhci3: [GIANT-LOCKED] >uhci3: [ITHREAD] >usb4: <UHCI (generic) USB controller> on uhci3 >usb4: USB revision 1.0 >uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 >uhub4: 2 ports with 2 removable, self powered >uhci4: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 18 at device 29.2 on pci0 >uhci4: [GIANT-LOCKED] >uhci4: [ITHREAD] >usb5: <UHCI (generic) USB controller> on uhci4 >usb5: USB revision 1.0 >uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 >uhub5: 2 ports with 2 removable, self powered >ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebff800-0xfebffbff irq 23 at device 29.7 on pci0 >ehci1: [GIANT-LOCKED] >ehci1: [ITHREAD] >usb6: EHCI version 1.0 >usb6: companion controllers, 2 ports each: usb3 usb4 usb5 >usb6: <EHCI (generic) USB 2.0 controller> on ehci1 >usb6: USB revision 2.0 >uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6 >uhub6: 6 ports with 6 removable, self powered >pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >pci5: <ACPI PCI bus> on pcib5 >dc0: <Davicom DM9102A 10/100BaseTX> port 0xb800-0xb8ff mem 0xfeaffc00-0xfeaffcff irq 22 at device 1.0 on pci5 >miibus1: <MII bus> on dc0 >amphy0: <DM9102 10/100 media interface> PHY 1 on miibus1 >amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >dc0: Ethernet address: 00:08:a1:27:88:1c >dc0: [ITHREAD] >rl0: <RealTek 8139 10/100BaseTX> port 0xb400-0xb4ff mem 0xfeaff800-0xfeaff8ff irq 23 at device 2.0 on pci5 >miibus2: <MII bus> on rl0 >rlphy0: <RealTek internal media interface> PHY 0 on miibus2 >rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >rl0: Ethernet address: 00:19:e0:0e:a7:fa >rl0: [ITHREAD] >isab0: <PCI-ISA bridge> at device 31.0 on pci0 >isa0: <ISA bus> on isab0 >atapci1: <Intel ICH8 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f,0xe080-0xe08f irq 19 at device 31.2 on pci0 >atapci1: [ITHREAD] >ata5: <ATA channel 0> on atapci1 >ata5: [ITHREAD] >ata6: <ATA channel 1> on atapci1 >ata6: [ITHREAD] >pci0: <serial bus, SMBus> at device 31.3 (no driver attached) >atapci2: <Intel ICH8 SATA300 controller> port 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f,0xc800-0xc80f irq 19 at device 31.5 on pci0 >atapci2: [ITHREAD] >ata7: <ATA channel 0> on atapci2 >ata7: [ITHREAD] >ata8: <ATA channel 1> on atapci2 >ata8: [ITHREAD] >acpi_button0: <Power Button> on acpi0 >sio0: configured irq 4 not in bitmap of probed irqs 0 >sio0: port may not be enabled >sio0: configured irq 4 not in bitmap of probed irqs 0 >sio0: port may not be enabled >sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >sio0: type 16550A >sio0: [FILTER] >atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 >atkbd0: <AT Keyboard> irq 1 on atkbdc0 >kbd0 at atkbd0 >atkbd0: [GIANT-LOCKED] >atkbd0: [ITHREAD] >psm0: <PS/2 Mouse> irq 12 on atkbdc0 >psm0: [GIANT-LOCKED] >psm0: [ITHREAD] >psm0: model IntelliMouse, device ID 3 >sc0: <System console> at flags 0x100 on isa0 >sc0: VGA <16 virtual consoles, flags=0x300> >sio1: configured irq 3 not in bitmap of probed irqs 0 >sio1: port may not be enabled >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 2> on uhub3 >kbd2 at ukbd0 >uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 2> on uhub3 >Timecounters tick every 1.000 msec >ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimited >ad10: 476940MB <Seagate ST3500320AS SD15> at ata5-master SATA150 >acd0: DVDR <HL-DT-ST DVDRAM GSA-H62N/CL00> at ata6-master SATA150 >pcm0: <HDA Codec: Analog Devices AD1988> >pcm0: <HDA Driver Revision: 20071129_0050> >SMP: AP CPU #1 Launched! >acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01 >cd0 at ata4 bus 0 target 0 lun 0 >cd0: <HL-DT-ST DVDRAM GSA-H62N CL00> Removable CD-ROM SCSI-0 device >cd0: 3.300MB/s transfers >cd0: cd present [325318 x 2048 byte records] >GEOM_LABEL: Label for provider acd0 is iso9660/BROODWAR. >Trying to mount root from ufs:/dev/ad10s2a >re0: link state changed to UP >dc0: link state changed to DOWN >dc0: link state changed to UP >acd0: FAILURE - READ_DVD_STRUCTURE ILLEGAL REQUEST asc=0x30 ascq=0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - WRITE_BIG timed out >acd0: FAILURE - WRITE_BIG timed out >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - READ_DVD_STRUCTURE ILLEGAL REQUEST asc=0x30 ascq=0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - WRITE_BIG timed out >acd0: FAILURE - WRITE_BIG timed out >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >************************************************************************************************************************ > >this was all working on my previous machine running 7.0 BETA-3 for i386 > >I've tested this DVD burner on windows and it's working > >anyone having the same problem ? > >Regards >MGP
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2036365664.292711.1199546469974.JavaMail.nobody>