Date: Wed, 7 Dec 2005 11:53:44 +0000 From: Scott Mitchell <scott+lists.freebsd@fishballoon.org> To: Lakshminarayanan Sundareswaran <csnarain@gmail.com> Cc: freebsd-mobile@freebsd.org Subject: Re: Xircom Driver Issue Message-ID: <20051207115343.GA19574@llama.fishballoon.org> In-Reply-To: <94b55680512062328y14b39c3dofcff725516796e30@mail.gmail.com> References: <94b55680512062328y14b39c3dofcff725516796e30@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Dec 06, 2005 at 11:28:03PM -0800, Lakshminarayanan Sundareswaran wrote: > Hi All, > > I'm new to FreeBSD. I recently installed FreeBSD 6.0 in my Laptop. The > installation completed successfully, but I was not able to configure the > network. Later on I found that my xe driver was not loading properly. The xe > driver is compiled into the kernel. During boot I'm getting the following > error message: > > module_register: module pccard/xe already exists! > Module pccard/xe failed to register already exists > > ed1: <Xircom 10/100 Network PC Card> at port 0x100-0x10f iomem > 0x88000000-0x88000fff irq 11 function 0 config 1 on pccard0 > device _attach: ed1 attach returned 6 > > I'm using a Xircom (XE2000) 32bit PCMCIA 10/100 Ethernet only card. > > Can anyone pls help mein resolveing the issue? I don't think I can help with the real problem, but this is nothing to do with xe - your card is a CardBus device that wants to work with the ed driver. That said, I know there are some outstanding annoyances with xe I need to look at... Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott at fishballoon.org | 0xAA775B8B | -- Anon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051207115343.GA19574>