Date: Thu, 01 Mar 2001 19:23:46 -0800 (PST) From: Jonathan Hanna <pangolin@home.com> To: freebsd-stable@FreeBSD.ORG Subject: Re: "cannot find label (no disk label)" Message-ID: <200103020323.f223NlD03436@cr222190-a.crdva1.bc.wave.home.com> In-Reply-To: <3A9893BD.22E9AD77@uiowa.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] On 25-Feb-01 Scott Allendorf wrote: > I think I am seeing the same thing on an old 486/66. I believe I > have found the commit that caused the problem, but have not had time to > take this further (it takes about 27 hours to do build/installworld on > this system). The kernel from 2000.10.25.06.00.00 boots correctly. > One built from 2000.10.25.06.55.00 sources exhibits the problem. The > only kernel-related commit during that window is: > > http://docs.freebsd.org/cgi/getmsg.cgi?fetch=564525+0+archive/2000/cvs-all/20001029.cvs-all > > I was just about to email Soren with the details, but it might make more > sense for someone with a faster machine to actually help debug this (I > am > willing but it will be slow going on this machine). > > I can also add that if I attempt to install 4.2-RELEASE from the CD > onto this disk, everything looks normal until sysinstall goes to write > to the disk. At that point, I get the message: > > panic: Going nowhere without my init! I have confirmed that this particular change causes my problem. With a recent 4.2-STABLE and the ata/* files backed up to just before this change things work. With it it fails. I also tried the ata files from the recent (Feb 25) MFC, same failure. For the ATA command on ad0 with params unit=0 cmd=0x20 cy=0 head=1 sec=2 cnt=1 I get HARD READ ERROR blk#64 status=59 error=10 when reading the label. I am including a verbose boot dmesg (from a working kernel). Unfortunately, I had to put the box back to work, so I cannot debug the problem, which is why I am sending this note. Jonathan Hanna <pangolin@home.com> [-- Attachment #2 --] Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-STABLE #4: Wed Feb 28 12:47:25 PST 2001 root@:/home/obj/home/src/sys/MGFW Calibrating clock(s) ... TSC clock: 66479494 Hz, i8254 clock: 1240950 Hz 1240950 Hz differs from default of 1193182 Hz by more than 1% Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P5 (65.81-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x515 Stepping = 5 Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 33554432 (32768K bytes) Physical memory chunk(s): 0x00001000 - 0x0009ffff, 651264 bytes (159 pages) 0x00449000 - 0x01ff7fff, 29028352 bytes (7087 pages) config> en ed0 config> ir ed0 5 config> f ed0 0 avail memory = 28581888 (27912K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f93a0 bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x0 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel" at 0xc0423000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc04230ac. Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk Creating DISK md0 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x00000000 (0x80000000) pci_open(1b): mode1res=0x00000000 (0xff000001) pci_open(2): mode 2 enable port (0x0cf8) is 0x00 pci_open(2a): mode2res=0x0e (0x0e) pci_open(2a): now trying mechanism 2 pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=04a38086) npx0: <math processor> on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 189897455 bytes/sec bzero() bandwidth = 2016129032 bytes/sec pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x00000000 (0x80000000) pci_open(1b): mode1res=0x00000000 (0xff000001) pci_open(2): mode 2 enable port (0x0cf8) is 0x00 pci_open(2a): mode2res=0x0e (0x0e) pci_open(2a): now trying mechanism 2 pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=04a38086) pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x04a3, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x0484, revid=0x03 class=00-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x1c1c, dev=0x0001, revid=0x00 class=00-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=14 found-> vendor=0x5333, dev=0x8811, revid=0x00 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 80800000, size 23 pci0: <PCI bus> on pcib0 CPU: Pentium, 66MHz, CPU->Memory posting ON Warning: Cache parity disabled! Cache: 256KB writeback, cache clocks=3-2-2-2/4-2-2-2 Cache flags: byte-control DRAM: page mode memory clocks=X-4-4-4 (70ns), CAS-wait CPU->PCI: posting ON, burst mode ON, PCI clocks=2-1-1-1 PCI->Memory: posting ON Refresh: RAS#Only BurstOf4 isab0: <Intel 82378ZB PCI to ISA bridge> at device 2.0 on pci0 Bus Modes: Resource Lock, Coprocessor errors enabled Keyboard controller: 60h,62h,64h,66h RTC: 70h-77h Port 92: enabled isa0: <ISA bus> on isab0 pci0: <unknown card> (vendor=0x1c1c, dev=0x0001) at 3.0 irq 14 pci0: <S3 Trio graphics accelerator> (vendor=0x5333, dev=0x8811) at 15.0 irq 11 Trying Read_Port at 203 RTL8019: adding io range 0x220-0x39f, size=0x20, align=0x20 RTL8019: adding irq mask 0x9e38 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fd1: <1200-KB 5.25" drive> on fdc0 drive 1 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000 ata0: mask=03 status0=50 status1=50 ata0: mask=03 status0=50 status1=50 ata0: devices = 0x3 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000 ata1: mask=00 status0=ff status1=ff ata1: probe allocation failed ata1 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0 adv0 failed to probe at port 0x330 on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0045 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0045 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio0: irq maps: 0xa41 0xa51 0xa41 0xa41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0xa41 0xa49 0xa41 0xa41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc_detect_fifo: PWord not supported ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ed0 at port 0x280-0x29f iomem 0xd8000-0xd9fff irq 5 drq 0 on isa0 bpf: ed0 attached ed0: address 02:60:8c:da:c8:d3, type 3c503 (16 bit) fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 isa_compat: didn't get ports for lnc lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 cs0 failed to probe at port 0x300-0x31f on isa0 sn0 failed to probe at port 0x300-0x30f irq 10 on isa0 isa_probe_children: probing PnP devices adv1: Invalid baseport of 0x220 specified. Nearest valid baseport is 0x230. Failing probe. ed1: <Realtek Plug & Play Ethernet Card> at port 0x220-0x23f irq 9 on isa0 bpf: ed1 attached ed1: address 00:c0:a8:4e:59:62, type NE2000 (16 bit) BIOS Geometries: 0:026a1f3f 0..618=619 cylinders, 0..31=32 heads, 1..63=63 sectors 1:03fd3f3f 0..1021=1022 cylinders, 0..63=64 heads, 1..63=63 sectors 0 accounted for Device configuration finished. IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 1000 packets/entry by default bpf: faith0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached bpf: ppp0 attached new masks: bio 684040, tty 63009a, net 6702ba bpf: sl0 attached IPv6 packet filtering initialized, unlimited logging ad0: <WDC AC2635F/27.25C38> ATA-0 disk at ata0 as master ad0: 610MB (1249920 sectors), 1240 cyls, 16 heads, 63 S/T, 512 B/S ad0: 1 secs/int, 1 depth queue, BIOSPIO ad0: piomode=3 dmamode=1 udmamode=-1 cblid=0 Creating DISK ad0 Creating DISK wd0 ad1: <WDC AC22100H/10.07H11> ATA-0 disk at ata0 as slave ad1: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S ad1: 1 secs/int, 1 depth queue, BIOSPIO ad1: piomode=4 dmamode=2 udmamode=-1 cblid=0 Creating DISK ad1 Creating DISK wd1 Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 1249919, size 1249857 : OK start_init: trying /sbin/init ad1s1: type 0xa5, start 63, end = 4124735, size 4124673 : OK
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200103020323.f223NlD03436>