Date: Fri, 17 Sep 1999 14:24:19 +0100 From: graeme.n.brown@bt.com To: freebsd-mobile@freebsd.org Subject: Is 3Com Megahetz 3CCFE574BT Supported under FreeBSD-3.2-RELEASE a nd PAO3 ? Message-ID: <71DA16F18D32D2119A1D0000F8FE9A9402B5A2CE@mbtlipnt01.btlabs.bt.co.uk>
next in thread | raw e-mail | index | archive | help
Am trying to get a suitable 100BaseT/10BaseT PCMCIA Ethernet card working
under FreeBSD-3.2-RELEASE and PAO3. Just bought a 3Com card which
I thought was a 3C574-TX but its product code appears to be
3Com Megahertz 3CCFE574BT.
I get the following pccardc dumpcis output :-
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
000: 43 02 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = OFF
Speed = 150nS, Memory block size = 8Kb, 1 units
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 01 01 74 05
PCMCIA ID = 0x101, OEM ID = 0x574
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #5, code = 0x15 (Version 1 info), length = 29
000: 04 01 33 43 6f 6d 00 4d 65 67 61 68 65 72 74 7a
010: 20 35 37 34 42 00 42 00 30 30 31 00 ff
Version = 4.1, Manuf = [3Com], card vers = [Megahertz 574B]
Addit. info = [B],[001]
Tuple #6, code = 0x1a (Configuration map), length = 6
000: 02 03 00 00 01 03
Reg len = 3, config register addr = 0x10000, last config = 0x3
Registers: XX------
Tuple #7, code = 0x1b (Configuration entry), length = 15
000: c1 01 1d 71 55 35 55 54 e0 72 5d 65 30 ff ff
Config index = 0x1(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 3 x 10mA
Max current average over 10 ms: 5 x 10mA
Power down supply current: 5 x 1mA
Wait scale Speed = 7.0 x 100 ns
RDY/BSY scale Speed = 5.0 x 100 us
Card decodes 5 address lines, full 8/16 Bit I/O
IRQ modes: Level
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Tuple #8, code = 0x19 (JEDEC descr for attribute memory), length = 3
000: 00 00 ff
Tuple #9, code = 0x14 (No link), length = 0
Tuple #10, code = 0x10 (Checksum), length = 5
000: ae ff 5b 00 00
Checksum from offset 65454, length 91, value is 0x0
Tuple #11, code = 0xff (Terminator), length = 0
2 slots found
I concocted this entry in etc/pccard.conf :-
# 3Com Megahertz 3CCFE574BT (experimental)
card "3Com" "Megahertz 574B"
config default "ep0" any
insert logger -s 3Com Megahertz 3C574B inserted
insert /etc/pccard_ether $device
remove logger -s 3Com Megahertz 3C574B removed
remove /etc/pccard_ether_remove $device
I get the following /var/log/messages :-
Sep 17 14:02:51 myname /kernel: Card inserted, slot 0
Sep 17 14:02:52 myname lpd[149]: restarted
Sep 17 14:02:53 myname pccardd[54]: Card "3Com"("Megahertz 574B") [B] [001]
matched "3Com" ("Megahertz 574B") [(null)] [(null)]
Sep 17 14:02:56 myname /kernel: card0: assign ep0 iobase 0x300 irq 9
Sep 17 14:02:56 myname /kernel: ep0: failed to come ready.
Sep 17 14:02:56 myname /kernel: Return IRQ=9
Sep 17 14:02:56 myname pccardd[54]: driver allocation failed for 3Com
(Device not configured)
Sep 17 14:02:56 myname pccardd[54]: pccardd started
Has anyone had experience with this card and got it to work ?
I could have bought a D-Link DE650 card from same supplier.
Perhaps this would be a better choice as to finding a suported
100BaseT/10BaseT card.
TIA
Graeme N Brown
email: graeme.n.brown@bt.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?71DA16F18D32D2119A1D0000F8FE9A9402B5A2CE>