Date: Tue, 12 Aug 1997 09:35:34 -0700 From: Amancio Hasty <hasty@rah.star-gate.com> To: Kenneth Merry <ken@plutotech.com> Cc: mestery@winternet.com (Kyle Mestery), freebsd-multimedia@FreeBSD.ORG Subject: Re: Just noticed this Message-ID: <199708121635.JAA04152@rah.star-gate.com> In-Reply-To: Your message of "Tue, 12 Aug 1997 09:22:29 MDT." <199708121522.JAA16365@pluto.plutotech.com>
next in thread | previous in thread | raw e-mail | index | archive | help
The driver is okay . I have the May 22 release of current and the driver works fine on my test box (p133) ;however, on my PPRO which I am running a very recent -current as of last week the Bt848 driver does not work. I strongly suspect the vm or pci interface. Does anyone have any problems with either the matrox or bt848 card not working after getting the latest kernel? Amancio >From The Desk Of Kenneth Merry : > Kyle Mestery wrote... > > > > I have finally gotten all the software compiled and ready for my > > Wincast/TV card to work. I installed it last nite and booted up, no > > problem, the kernel found it, but here is what the dmesg output says about > > it: > > > > bktr0: <BrookTree 848> rev 0x11 int a irq 18 on pci0.18.0 > > Hauppauge WinCast/TV, Temic PAL tuner. > > ^^^ > > > > Should that really be a PAL tuner? I guess I don't know if that is right > > or not, and the PAL/ntsc difference might not affect tuners, but it is > > just a thought. Anyways, I can't get any reception on the TV. Before I > > do anything though, I am going to check my cable hookup one more time in > > my apartment. I do have an antennae I am going to try and use also. I > > will report back. One more thing Amancio, I just compiled a kernel > > without BROKEN_SB defined. I am at work now, but will report back either > > tonite or tomorrow morning as to how that works. Thanks! > > > Amancio has sent out a couple of pieces of mail on -current about > the bt848 driver being broken. I tried mine out Sunday night for the first > time in a couple of months, and it didn't work. No picture, nothing. > > So I think something is wrong with the driver. Has anyone out > there had any success with the bt848 driver and -current? > > Ken > -- > Kenneth Merry > ken@plutotech.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199708121635.JAA04152>