Date: Mon, 24 Mar 2014 02:00:25 -0700 From: Adrian Chadd <adrian.chadd@gmail.com> To: Milan Obuch <freebsd-mips@dino.sk> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: db120 (mips74k) boot messages; further help wanted Message-ID: <CAJ-Vmomt%2BZPRjXwNR8RkQwfNCxBx-tjPE0twMuM6DP2jSK7L6g@mail.gmail.com> In-Reply-To: <20140323232304.6ac5c205@zeta.dino.sk> References: <CAJ-VmonWofHESnSAMxD2F0K65R7OP0Z%2BgK8R_tcM=b=Q15YdYw@mail.gmail.com> <CAB=2f8yjtETregRVOuV5Wtper7hApOag4V3cY4Nw1AJeWM=4sw@mail.gmail.com> <20140323232304.6ac5c205@zeta.dino.sk>
next in thread | previous in thread | raw e-mail | index | archive | help
Noone has yet. I'd pay attention to the MDIO reset, MDIO configuration stuff in if_arge.c and how the clocking is setup. It's possible I'm missing some initialisation code form openwrt. I think i have the MDIO register read/write working fine. The RB2011 kernel in question is correctly being built as a mips74k kernel, right? -a On 23 March 2014 15:23, Milan Obuch <freebsd-mips@dino.sk> wrote: > On Mon, 17 Mar 2014 10:03:53 -0300 > Luiz Otavio O Souza <lists.br@gmail.com> wrote: > >> On 16 March 2014 05:46, Adrian Chadd wrote: >> > Hi, >> > >> > Now that I've mostly finished the DB120 port and Sean's working on >> > the DIR-825 (rev C1) port, I thought I'd just give a boot example >> > of this platform. >> > >> > It's quite a sweet mips board. I haven't yet booted a full rootfs >> > via USB; that's what I'll do tomorrow or Monday. I'll start stress >> > testing the userland and VM then. But it works great as an AP. >> > >> > https://code.google.com/p/freebsd-wifi-build/wiki/AtherosReferenceDB120 >> > >> > I'm hoping the DIR-825 C1 port will be just as stable as the DB120 >> > is for me. >> > >> > Now, the missing bits: >> > >> > * NAND flash controller - I'm making a start on this now; >> > * I2S - I'll port this over afterward, so we can have sound on >> > boards that ship with sound; >> > * AR8327 VLAN (tagged and per-port) support - someone else will have >> > to crime this from openwrt. I may eventually get around to it, but >> > it'll take some time. I don't currently use the VLAN stuff at home >> > and I haven't yet set this up as a router gateway so I don't need >> > the LAN/WAN port distinction. >> >> I'll get there eventually... if nobody beats me here... >> >> I have one RB2011 (the one with a gbic option) and i want to see it >> working soon (but i have a few things to finish before that happen :/) >> >> Luiz >> > > Hi, > > I was able to build a kernel for RB2011 and it works quite well, just > one, but really important thing does not work for me - ethernet switch. > It looks like something wrong with MDIO, so I can't configure correctly > the switches, and as there is no port connected directly to CPU, I > can't currently do any network traffic. If I could reliably read/write > switch registers, then I eventually would play with vlan support. > > Did someone achieve success with RB2011 ethernet? > > Regards, > Milan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmomt%2BZPRjXwNR8RkQwfNCxBx-tjPE0twMuM6DP2jSK7L6g>