Date: Sun, 11 Mar 2001 18:17:37 -0000 From: "Simon Dick" <simond@irrelevant.org> To: <freebsd-questions@freebsd.org> Subject: Problem with ATA code detecting drive size Message-ID: <002801c0aa57$b0c808b0$fb587ec2@SIDLAPTOP>
next in thread | raw e-mail | index | archive | help
Since sometime in 4.1-STABLE I've been having problems getting FreeBSD
working with my 20gb IBM HD, I've enclosed output from an old boot -v from
when it worked and a more recent boot -v from 4.2-STABLE (I get the same
result when trying with the latest 4.3-BETA so it's not been fixed yet.
For some reason unknown to me this problem first started when I removed the
primary slave drive (which was only ATA33 capable) and put a new cable in to
enable ATA66 on the drive, from then on FreeBSD has seen the drive as a 2gb
drive despite me even trying replacing the old cable, FreeBSD still seemed
to be
setting the drive to ATA66 despite the old ATA33 only cable.
Since Win98SE still works fine with the correct setting (and the bios even
says ATA33
with the old cable) I'm guessing that it's something in the IDE code but
having no time
to look at the problem yet I may well have to install NetBSD or OpenBSD just
to get
a working "proper" OS installed :(
Here's the old boot -v output:
Sep 17 15:47:51 adsl /kernel.old: Copyright (c) 1992-2000 The FreeBSD
Project.
Sep 17 15:47:51 adsl /kernel.old: Copyright (c) 1979, 1980, 1983, 1986,
1988, 1989, 1991, 1992, 1993, 1994
Sep 17 15:47:51 adsl /kernel.old: The Regents of the University of
California. All rights reserved.
Sep 17 15:47:51 adsl /kernel.old: FreeBSD 4.1-STABLE #0: Wed Sep 6 15:08:28
BST 2000
Sep 17 15:47:51 adsl /kernel.old:
root@adsl.irrelevant.org:/usr/obj/usr/src/sys/SIMOND
Sep 17 15:47:51 adsl /kernel.old: Calibrating clock(s) ... TSC clock:
655808681 Hz, i8254 clock: 1193124 Hz
Sep 17 15:47:51 adsl /kernel.old: CLK_USE_I8254_CALIBRATION not specified -
using default frequency
Sep 17 15:47:51 adsl /kernel.old: Timecounter "i8254" frequency 1193182 Hz
Sep 17 15:47:51 adsl /kernel.old: CLK_USE_TSC_CALIBRATION not specified -
using old calibration method
Sep 17 15:47:51 adsl /kernel.old: CPU: AMD Athlon(tm) Processor (655.85-MHz
686-class CPU)
Sep 17 15:47:51 adsl /kernel.old: Origin = "AuthenticAMD" Id = 0x630
Stepping = 0
Sep 17 15:47:51 adsl /kernel.old:
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
Sep 17 15:47:51 adsl /kernel.old: AMD
Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
Sep 17 15:47:51 adsl /kernel.old: Data TLB: 24 entries, fully associative
Sep 17 15:47:51 adsl /kernel.old: Instruction TLB: 16 entries, fully
associative
Sep 17 15:47:51 adsl /kernel.old: L1 data cache: 64 kbytes, 64 bytes/line, 1
lines/tag, 2-way associative
Sep 17 15:47:51 adsl /kernel.old: L1 instruction cache: 64 kbytes, 64
bytes/line, 1 lines/tag, 2-way associative
Sep 17 15:47:51 adsl /kernel.old: L2 internal cache: 1 kbytes, 64
bytes/line, 1 lines/tag, 8-way associative
Sep 17 15:47:51 adsl /kernel.old: real memory = 268353536 (262064K bytes)
Sep 17 15:47:51 adsl /kernel.old: Physical memory chunk(s):
Sep 17 15:47:51 adsl /kernel.old: 0x00001000 - 0x0009efff, 647168 bytes (158
pages)
Sep 17 15:47:51 adsl /kernel.old: 0x0035b000 - 0x0ffe3fff, 264802304 bytes
(64649 pages)
Sep 17 15:47:51 adsl /kernel.old: avail memory = 258048000 (252000K bytes)
Sep 17 15:47:51 adsl /kernel.old: bios32: Found BIOS32 Service Directory
header at 0xc00f92a0
Sep 17 15:47:51 adsl /kernel.old: bios32: Entry = 0xf0ef0 (c00f0ef0) Rev = 0
Len = 1
Sep 17 15:47:51 adsl /kernel.old: pcibios: PCI BIOS entry at 0x10f0
Sep 17 15:47:51 adsl /kernel.old: pnpbios: Found PnP BIOS data at 0xc00fc2b0
Sep 17 15:47:51 adsl /kernel.old: pnpbios: Entry = f0000:c2e0 Rev = 1.0
Sep 17 15:47:51 adsl /kernel.old: pnpbios: OEM ID cd041
Sep 17 15:47:51 adsl /kernel.old: Other BIOS signatures found:
Sep 17 15:47:51 adsl /kernel.old: ACPI: 000f6730
Sep 17 15:47:51 adsl /kernel.old: Pentium Pro MTRR support enabled
Sep 17 15:47:51 adsl /kernel.old: pci_open(1): mode 1 addr port (0x0cf8) is
0x80000060
Sep 17 15:47:51 adsl /kernel.old: pci_open(1a): mode1res=0x80000000
(0x80000000)
Sep 17 15:47:51 adsl /kernel.old: pci_cfgcheck: device 0 [class=060000]
[hdr=00] is there (id=03051106)
Sep 17 15:47:51 adsl /kernel.old: pcib-: pcib0 exists, using next available
unit number
Sep 17 15:47:51 adsl /kernel.old: apm0: <APM BIOS> on motherboard
Sep 17 15:47:51 adsl /kernel.old: apm: found APM BIOS v1.2, connected at
v1.2
Sep 17 15:47:51 adsl /kernel.old: npx0: <math processor> on motherboard
Sep 17 15:47:51 adsl /kernel.old: npx0: INT 16 interface
Sep 17 15:47:51 adsl /kernel.old: pci_open(1): mode 1 addr port (0x0cf8) is
0x00000000
Sep 17 15:47:51 adsl /kernel.old: pci_open(1a): mode1res=0x80000000
(0x80000000)
Sep 17 15:47:51 adsl /kernel.old: pci_cfgcheck: device 0 [class=060000]
[hdr=00] is there (id=03051106)
Sep 17 15:47:51 adsl /kernel.old: pcib0: <Host to PCI bridge> on motherboard
Sep 17 15:47:51 adsl /kernel.old: found-> vendor=0x1106, dev=0x0305,
revid=0x02
Sep 17 15:47:51 adsl /kernel.old: class=06-00-00, hdrtype=0x00, mfdev=0
Sep 17 15:47:51 adsl /kernel.old: subordinatebus=0 secondarybus=0
Sep 17 15:47:51 adsl /kernel.old: map[10]: type 1, range 32, base d0000000,
size 28
Sep 17 15:47:51 adsl /kernel.old: found-> vendor=0x1106, dev=0x8305,
revid=0x00
Sep 17 15:47:51 adsl /kernel.old: class=06-04-00, hdrtype=0x01, mfdev=0
Sep 17 15:47:51 adsl /kernel.old: subordinatebus=1 secondarybus=1
Sep 17 15:47:51 adsl /kernel.old: found-> vendor=0x1106, dev=0x0686,
revid=0x22
Sep 17 15:47:51 adsl /kernel.old: class=06-01-00, hdrtype=0x00, mfdev=1
Sep 17 15:47:51 adsl /kernel.old: subordinatebus=0 secondarybus=0
Sep 17 15:47:51 adsl /kernel.old: found-> vendor=0x1106, dev=0x0571,
revid=0x10
Sep 17 15:47:51 adsl /kernel.old: class=01-01-8a, hdrtype=0x00, mfdev=0
Sep 17 15:47:51 adsl /kernel.old: subordinatebus=0 secondarybus=0
Sep 17 15:47:51 adsl /kernel.old: map[20]: type 1, range 32, base 0000d800,
size 4
Sep 17 15:47:51 adsl /kernel.old: found-> vendor=0x1106, dev=0x3038,
revid=0x10
Sep 17 15:47:51 adsl /kernel.old: class=0c-03-00, hdrtype=0x00, mfdev=0
Sep 17 15:47:51 adsl /kernel.old: subordinatebus=0 secondarybus=0
Sep 17 15:47:51 adsl /kernel.old: intpin=d, irq=9
Sep 17 15:47:51 adsl /kernel.old: map[20]: type 1, range 32, base 0000d400,
size 5
Sep 17 15:47:51 adsl /kernel.old: found-> vendor=0x1106, dev=0x3038,
revid=0x10
Sep 17 15:47:51 adsl /kernel.old: class=0c-03-00, hdrtype=0x00, mfdev=0
Sep 17 15:47:51 adsl /kernel.old: subordinatebus=0 secondarybus=0
Sep 17 15:47:51 adsl /kernel.old: intpin=d, irq=9
Sep 17 15:47:51 adsl /kernel.old: map[20]: type 1, range 32, base 0000d000,
size 5
Sep 17 15:47:51 adsl /kernel.old: found-> vendor=0x1106, dev=0x3057,
revid=0x30
Sep 17 15:47:51 adsl /kernel.old: class=06-00-00, hdrtype=0x00, mfdev=0
Sep 17 15:47:51 adsl /kernel.old: subordinatebus=0 secondarybus=0
Sep 17 15:47:51 adsl /kernel.old: found-> vendor=0x10b8, dev=0x0005,
revid=0x06
Sep 17 15:47:51 adsl /kernel.old: class=02-00-00, hdrtype=0x00, mfdev=0
Sep 17 15:47:51 adsl /kernel.old: subordinatebus=0 secondarybus=0
Sep 17 15:47:51 adsl /kernel.old: intpin=a, irq=5
Sep 17 15:47:51 adsl /kernel.old: map[10]: type 1, range 32, base 0000a400,
size 8
Sep 17 15:47:51 adsl /kernel.old: map[14]: type 1, range 32, base cc000000,
size 12
Sep 17 15:47:51 adsl /kernel.old: found-> vendor=0x1274, dev=0x1371,
revid=0x06
Sep 17 15:47:51 adsl /kernel.old: class=04-01-00, hdrtype=0x00, mfdev=0
Sep 17 15:47:51 adsl /kernel.old: subordinatebus=0 secondarybus=0
Sep 17 15:47:51 adsl /kernel.old: intpin=a, irq=10
Sep 17 15:47:51 adsl /kernel.old: map[10]: type 1, range 32, base 0000a000,
size 6
Sep 17 15:47:51 adsl /kernel.old: found-> vendor=0x9004, dev=0x6178,
revid=0x03
Sep 17 15:47:51 adsl /kernel.old: class=01-00-00, hdrtype=0x00, mfdev=0
Sep 17 15:47:51 adsl /kernel.old: subordinatebus=0 secondarybus=0
Sep 17 15:47:51 adsl /kernel.old: intpin=a, irq=11
Sep 17 15:47:51 adsl /kernel.old: map[10]: type 1, range 32, base 00009800,
size 8
Sep 17 15:47:51 adsl /kernel.old: map[14]: type 1, range 32, base cb800000,
size 12
Sep 17 15:47:51 adsl /kernel.old: found-> vendor=0x105a, dev=0x0d30,
revid=0x02
Sep 17 15:47:51 adsl /kernel.old: class=01-80-00, hdrtype=0x00, mfdev=0
Sep 17 15:47:51 adsl /kernel.old: subordinatebus=0 secondarybus=0
Sep 17 15:47:51 adsl /kernel.old: intpin=a, irq=10
Sep 17 15:47:51 adsl /kernel.old: map[10]: type 1, range 32, base 00009400,
size 3
Sep 17 15:47:51 adsl /kernel.old: map[14]: type 1, range 32, base 00009000,
size 2
Sep 17 15:47:51 adsl /kernel.old: map[18]: type 1, range 32, base 00008800,
size 3
Sep 17 15:47:51 adsl /kernel.old: map[1c]: type 1, range 32, base 00008400,
size 2
Sep 17 15:47:51 adsl /kernel.old: map[20]: type 1, range 32, base 00008000,
size 6
Sep 17 15:47:51 adsl /kernel.old: map[24]: type 1, range 32, base cb000000,
size 17
Sep 17 15:47:51 adsl /kernel.old: pci0: <PCI bus> on pcib0
Sep 17 15:47:51 adsl /kernel.old: agp0: <VIA Generic host to PCI bridge> mem
0xd0000000-0xdfffffff at device 0.0 on pci0
Sep 17 15:47:51 adsl /kernel.old: agp0: allocating GATT for aperture of size
256M
Sep 17 15:47:51 adsl /kernel.old: pcib2: <PCI to PCI bridge (vendor=1106
device=8305)> at device 1.0 on pci0
Sep 17 15:47:51 adsl /kernel.old: found-> vendor=0x102b, dev=0x0525,
revid=0x04
Sep 17 15:47:51 adsl /kernel.old: class=03-00-00, hdrtype=0x00, mfdev=0
Sep 17 15:47:51 adsl /kernel.old: subordinatebus=0 secondarybus=0
Sep 17 15:47:51 adsl /kernel.old: intpin=a, irq=11
Sep 17 15:47:51 adsl /kernel.old: map[10]: type 1, range 32, base ce000000,
size 25
Sep 17 15:47:51 adsl /kernel.old: map[14]: type 1, range 32, base cd000000,
size 14
Sep 17 15:47:51 adsl /kernel.old: map[18]: type 1, range 32, base cc800000,
size 23
Sep 17 15:47:51 adsl /kernel.old: pci1: <PCI bus> on pcib2
Sep 17 15:47:51 adsl /kernel.old: pci1: <Matrox MGA G400 AGP graphics
accelerator> (vendor=0x102b, dev=0x0525) at 0.0 irq 11
Sep 17 15:47:51 adsl /kernel.old: isab0: <VIA 82C686 PCI-ISA bridge> at
device 4.0 on pci0
Sep 17 15:47:51 adsl /kernel.old: isa0: <ISA bus> on isab0
Sep 17 15:47:51 adsl /kernel.old: atapci0: <VIA 82C686 ATA66 controller>
port 0xd800-0xd80f at device 4.1 on pci0
Sep 17 15:47:51 adsl /kernel.old: ata0: iobase=0x01f0 altiobase=0x03f6
bmaddr=0xd800
Sep 17 15:47:51 adsl /kernel.old: ata0: mask=03 status0=50 status1=50
Sep 17 15:47:51 adsl /kernel.old: ata0: mask=03 status0=50 status1=50
Sep 17 15:47:51 adsl /kernel.old: ata0: devices = 0x3
Sep 17 15:47:51 adsl /kernel.old: ata0: at 0x1f0 irq 14 on atapci0
Sep 17 15:47:51 adsl /kernel.old: ata1: iobase=0x0170 altiobase=0x0376
bmaddr=0xd808
Sep 17 15:47:51 adsl /kernel.old: ata1: mask=03 status0=50 status1=00
Sep 17 15:47:51 adsl /kernel.old: ata1: mask=03 status0=00 status1=00
Sep 17 15:47:51 adsl /kernel.old: ata1: devices = 0x4
Sep 17 15:47:51 adsl /kernel.old: ata1: at 0x170 irq 15 on atapci0
Sep 17 15:47:51 adsl /kernel.old: uhci0: <VIA 83C572 USB controller> port
0xd400-0xd41f irq 9 at device 4.2 on pci0
Sep 17 15:47:51 adsl /kernel.old: usb0: <VIA 83C572 USB controller> on uhci0
Sep 17 15:47:51 adsl /kernel.old: usb0: USB revision 1.0
Sep 17 15:47:51 adsl /kernel.old: uhub0: VIA UHCI root hub, class 9/0, rev
1.00/1.00, addr 1
Sep 17 15:47:51 adsl /kernel.old: uhub0: 2 ports with 2 removable, self
powered
Sep 17 15:47:51 adsl /kernel.old: uhci1: <VIA 83C572 USB controller> port
0xd000-0xd01f irq 9 at device 4.3 on pci0
Sep 17 15:47:51 adsl /kernel.old: using shared irq9.
Sep 17 15:47:51 adsl /kernel.old: usb1: <VIA 83C572 USB controller> on uhci1
Sep 17 15:47:51 adsl /kernel.old: usb1: USB revision 1.0
Sep 17 15:47:51 adsl /kernel.old: uhub1: VIA UHCI root hub, class 9/0, rev
1.00/1.00, addr 1
Sep 17 15:47:51 adsl /kernel.old: uhub1: 2 ports with 2 removable, self
powered
Sep 17 15:47:51 adsl /kernel.old: uhub2: ALCOR Generic USB Hub, class 9/0,
rev 1.10/1.00, addr 2
Sep 17 15:47:51 adsl /kernel.old: uhub2: 4 ports with 4 removable, self
powered
Sep 17 15:47:51 adsl /kernel.old: tx0: <SMC 83c170> port 0xa400-0xa4ff mem
0xcc000000-0xcc000fff irq 5 at device 10.0 on pci0
Sep 17 15:47:51 adsl /kernel.old: tx0: address 00:e0:29:0b:d5:31, type
SMC9432TX, Auto-Neg 10Mbps bpf: tx0 attached
Sep 17 15:47:51 adsl /kernel.old:
Sep 17 15:47:51 adsl /kernel.old: tx0: driver is using old-style
compatability shims
Sep 17 15:47:51 adsl /kernel.old: pcm0: <AudioPCI ES1371> port 0xa000-0xa03f
irq 10 at device 11.0 on pci0
Sep 17 15:47:51 adsl /kernel.old: pcm0: ac97 codec id 0x54524102
Sep 17 15:47:51 adsl /kernel.old: pcm0: ac97 codec features 6 bit master
volume, Binaura 3D Audio Enhancement
Sep 17 15:47:51 adsl /kernel.old: pcm: setmap fcbb000, 1000; 0xc0c3d000 ->
fcbb000
Sep 17 15:47:51 adsl /kernel.old: pcm: setmap fcb0000, 1000; 0xc0c48000 ->
fcb0000
Sep 17 15:47:51 adsl /kernel.old: ahc0: <Adaptec 2940A Ultra SCSI adapter>
port 0x9800-0x98ff mem 0xcb800000-0xcb800fff irq 11 at device 12.0 on pci0
Sep 17 15:47:51 adsl /kernel.old: ahc0: Reading SEEPROM...done.
Sep 17 15:47:51 adsl /kernel.old: ahc0: internal 50 cable is present,
internal 68 cable not present
Sep 17 15:47:51 adsl /kernel.old: ahc0: external cable not present
Sep 17 15:47:51 adsl /kernel.old: ahc0: BIOS eeprom not present
Sep 17 15:47:51 adsl /kernel.old: ahc0: Low byte termination Enabled
Sep 17 15:47:51 adsl /kernel.old: ahc0: aic7860 Single Channel A, SCSI Id=7,
3/255 SCBs
Sep 17 15:47:51 adsl /kernel.old: ahc0: Downloading Sequencer Program... 413
instructions downloaded
Sep 17 15:47:51 adsl /kernel.old: atapci1: <Promise ATA100 controller> port
0x8000-0x803f,0x8400-0x8403,0x8800-0x8807,0x9000-0x9003,0x9400-0x9407 mem
0xcb000000-0xcb01ffff irq 10 at device 17.0 on pci0
Sep 17 15:47:51 adsl /kernel.old: ata-: ata2 exists, using next available
unit number
Sep 17 15:47:51 adsl /kernel.old: ata2: iobase=0x9400 altiobase=0x9000
bmaddr=0x8000
Sep 17 15:47:51 adsl /kernel.old: ata2: mask=03 status0=08 status1=08
Sep 17 15:47:51 adsl /kernel.old: ata2: mask=03 status0=08 status1=08
Sep 17 15:47:51 adsl /kernel.old: ata2: devices = 0x3
Sep 17 15:47:51 adsl /kernel.old: ata2: at 0x9400 on atapci1
Sep 17 15:47:51 adsl /kernel.old: using shared irq10.
Sep 17 15:47:51 adsl /kernel.old: ata3: iobase=0x8800 altiobase=0x8400
bmaddr=0x8008
Sep 17 15:47:51 adsl /kernel.old: ata3: mask=03 status0=08 status1=08
Sep 17 15:47:51 adsl /kernel.old: ata3: mask=03 status0=08 status1=08
Sep 17 15:47:51 adsl /kernel.old: ata3: devices = 0x3
Sep 17 15:47:51 adsl /kernel.old: ata3: at 0x8800 on atapci1
Sep 17 15:47:51 adsl /kernel.old: pci_open(1): mode 1 addr port (0x0cf8) is
0x00000000
Sep 17 15:47:51 adsl /kernel.old: pci_open(1a): mode1res=0x80000000
(0x80000000)
Sep 17 15:47:51 adsl /kernel.old: pci_cfgcheck: device 0 [class=060000]
[hdr=00] is there (id=03051106)
Sep 17 15:47:51 adsl /kernel.old: pci-: pci1 exists, using next available
unit number
Sep 17 15:47:51 adsl /kernel.old: pcib1: <Host to PCI bridge> on motherboard
Sep 17 15:47:51 adsl /kernel.old: pci2: <PCI bus> on pcib1
Sep 17 15:47:51 adsl /kernel.old: Trying Read_Port at 203
Sep 17 15:47:51 adsl /kernel.old: Trying Read_Port at 243
Sep 17 15:47:51 adsl /kernel.old: Trying Read_Port at 283
Sep 17 15:47:51 adsl /kernel.old: Trying Read_Port at 2c3
Sep 17 15:47:51 adsl /kernel.old: Trying Read_Port at 303
Sep 17 15:47:51 adsl /kernel.old: Trying Read_Port at 343
Sep 17 15:47:51 adsl /kernel.old: Trying Read_Port at 383
Sep 17 15:47:51 adsl /kernel.old: Trying Read_Port at 3c3
Sep 17 15:47:51 adsl /kernel.old: isa_probe_children: disabling PnP devices
Sep 17 15:47:51 adsl /kernel.old: isa_probe_children: probing non-PnP
devices
Sep 17 15:47:51 adsl /kernel.old: atkbdc0: <Keyboard controller (i8042)> at
port 0x60,0x64 on isa0
Sep 17 15:47:51 adsl /kernel.old: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Sep 17 15:47:51 adsl /kernel.old: kbd0: atkbd0, generic (0), config:0x0,
flags:0x3f0000
Sep 17 15:47:51 adsl /kernel.old: psm0: current command byte:0047
Sep 17 15:47:51 adsl /kernel.old: kbdc: TEST_AUX_PORT status:0000
Sep 17 15:47:51 adsl /kernel.old: kbdc: RESET_AUX return code:00fa
Sep 17 15:47:51 adsl /kernel.old: kbdc: RESET_AUX status:00aa
Sep 17 15:47:51 adsl /kernel.old: kbdc: RESET_AUX ID:0000
Sep 17 15:47:51 adsl /kernel.old: psm: status 00 02 64
Sep 17 15:47:52 adsl /kernel.old: psm: status 00 00 64
Sep 17 15:47:52 adsl /kernel.old: psm: status 00 03 64
Sep 17 15:47:52 adsl /kernel.old: psm: status 00 03 64
Sep 17 15:47:52 adsl /kernel.old: psm: data 08 00 00
Sep 17 15:47:52 adsl /kernel.old: psm: status 10 00 64
Sep 17 15:47:52 adsl /kernel.old: psm: status 00 02 64
Sep 17 15:47:52 adsl /kernel.old: psm: data 08 00 00
Sep 17 15:47:52 adsl /kernel.old: psm: status 00 02 64
Sep 17 15:47:52 adsl /kernel.old: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Sep 17 15:47:52 adsl /kernel.old: psm0: model Generic PS/2 mouse, device ID
0-00, 2 buttons
Sep 17 15:47:52 adsl /kernel.old: psm0: config:00000000, flags:00000000,
packet size:3
Sep 17 15:47:52 adsl /kernel.old: psm0: syncmask:c0, syncbits:00
Sep 17 15:47:52 adsl /kernel.old: vga0: <Generic ISA VGA> at port
0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Sep 17 15:47:52 adsl /kernel.old: fb0: vga0, vga, type:VGA (5),
flags:0x7007f
Sep 17 15:47:52 adsl /kernel.old: fb0: port:0x3c0-0x3df, crtc:0x3d4,
mem:0xa0000 0x20000
Sep 17 15:47:52 adsl /kernel.old: fb0: init mode:24, bios mode:3, current
mode:24
Sep 17 15:47:52 adsl /kernel.old: fb0: window:0xc00b8000 size:32k gran:32k,
buf:0 size:32k
Sep 17 15:47:52 adsl /kernel.old: VGA parameters upon power-up
Sep 17 15:47:52 adsl /kernel.old: 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82
55 81
Sep 17 15:47:52 adsl /kernel.old: bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28
1f 96
Sep 17 15:47:52 adsl /kernel.old: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a
3b 3c
Sep 17 15:47:52 adsl /kernel.old: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e
00 ff
Sep 17 15:47:52 adsl /kernel.old: VGA parameters in BIOS for mode 24
Sep 17 15:47:52 adsl /kernel.old: 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82
55 81
Sep 17 15:47:52 adsl /kernel.old: bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28
1f 96
Sep 17 15:47:52 adsl /kernel.old: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a
3b 3c
Sep 17 15:47:52 adsl /kernel.old: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e
00 ff
Sep 17 15:47:52 adsl /kernel.old: EGA/VGA parameters to be used for mode 24
Sep 17 15:47:52 adsl /kernel.old: 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82
55 81
Sep 17 15:47:52 adsl /kernel.old: bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28
1f 96
Sep 17 15:47:52 adsl /kernel.old: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a
3b 3c
Sep 17 15:47:52 adsl /kernel.old: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e
00 ff
Sep 17 15:47:52 adsl /kernel.old: sc0: <System console> on isa0
Sep 17 15:47:52 adsl /kernel.old: sc0: VGA <16 virtual consoles,
flags=0x200>
Sep 17 15:47:52 adsl /kernel.old: sc0: fb0, kbd0, terminal emulator: sc
(syscons terminal)
Sep 17 15:47:52 adsl /kernel.old: fdc0: <NEC 72065B or clone> at port
0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Sep 17 15:47:52 adsl /kernel.old: fdc0: FIFO enabled, 8 bytes threshold
Sep 17 15:47:52 adsl /kernel.old: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Sep 17 15:47:52 adsl /kernel.old: sio0: irq maps: 0x1 0x11 0x1 0x1
Sep 17 15:47:52 adsl /kernel.old: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10
on isa0
Sep 17 15:47:52 adsl /kernel.old: sio0: type 16550A
Sep 17 15:47:52 adsl /kernel.old: sio1: irq maps: 0x1 0x9 0x1 0x1
Sep 17 15:47:52 adsl /kernel.old: sio1 at port 0x2f8-0x2ff irq 3 on isa0
Sep 17 15:47:52 adsl /kernel.old: sio1: type 16550A
Sep 17 15:47:52 adsl /kernel.old: ppc0: parallel port found at 0x378
Sep 17 15:47:52 adsl /kernel.old: ppc0: using extended I/O port range
Sep 17 15:47:52 adsl /kernel.old: ppc0: ECP SPP ECP+EPP SPP
Sep 17 15:47:52 adsl /kernel.old: ppc0: <Parallel port> at port 0x378-0x37f
irq 7 on isa0
Sep 17 15:47:52 adsl /kernel.old: ppc0: SMC-like chipset
(ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Sep 17 15:47:52 adsl /kernel.old: ppc0: FIFO with 16/16/8 bytes threshold
Sep 17 15:47:52 adsl /kernel.old: lpt0: <Printer> on ppbus0
Sep 17 15:47:52 adsl /kernel.old: lpt0: Interrupt-driven port
Sep 17 15:47:52 adsl /kernel.old: isa_probe_children: probing PnP devices
Sep 17 15:47:52 adsl /kernel.old: BIOS Geometries:
Sep 17 15:47:52 adsl /kernel.old: 0:03fffe3f 0..1023=1024 cylinders,
0..254=255 heads, 1..63=63 sectors
Sep 17 15:47:52 adsl /kernel.old: 1:03fffe3f 0..1023=1024 cylinders,
0..254=255 heads, 1..63=63 sectors
Sep 17 15:47:52 adsl /kernel.old: 0 accounted for
Sep 17 15:47:52 adsl /kernel.old: Device configuration finished.
Sep 17 15:47:52 adsl /kernel.old: bpf: ppp0 attached
Sep 17 15:47:52 adsl /kernel.old: bpf: ppp1 attached
Sep 17 15:47:52 adsl /kernel.old: new masks: bio 68c640, tty 63149a, net
6714ba
Sep 17 15:47:52 adsl /kernel.old: bpf: ds0 attached
Sep 17 15:47:52 adsl /kernel.old: bpf: lo0 attached
Sep 17 15:47:52 adsl /kernel.old: IP Filter: v3.4.8 initialized. Default =
pass all, Logging = enabled
Sep 17 15:47:52 adsl /kernel.old: ata2-slave: ata_command: timeout waiting
for intr
Sep 17 15:47:52 adsl /kernel.old: ata2-slave: identify failed
Sep 17 15:47:52 adsl /kernel.old: ata2-master: ata_command: timeout waiting
for intr
Sep 17 15:47:52 adsl /kernel.old: ata2-master: identify failed
Sep 17 15:47:52 adsl /kernel.old: ata3-slave: ata_command: timeout waiting
for intr
Sep 17 15:47:52 adsl /kernel.old: ata3-slave: identify failed
Sep 17 15:47:52 adsl /kernel.old: ata3-master: ata_command: timeout waiting
for intr
Sep 17 15:47:52 adsl /kernel.old: ata3-master: identify failed
Sep 17 15:47:52 adsl /kernel.old: ata0-master: DMA limited to UDMA33,
non-ATA66 compliant cable
Sep 17 15:47:52 adsl /kernel.old: ata0-master: success setting UDMA2 on VIA
chip
Sep 17 15:47:52 adsl /kernel.old: ad0: <IBM-DPTA-372050/P76OA30A> ATA-4 disk
at ata0 as master
Sep 17 15:47:52 adsl /kernel.old: ad0: 19574MB (40088160 sectors), 39770
cyls, 16 heads, 63 S/T, 512 B/S
Sep 17 15:47:52 adsl /kernel.old: ad0: 16 secs/int, 32 depth queue, UDMA33
Sep 17 15:47:52 adsl /kernel.old: ad0: piomode=4 dmamode=2 udmamode=4
cblid=0
Sep 17 15:47:52 adsl /kernel.old: Creating DISK ad0
Sep 17 15:47:52 adsl /kernel.old: Creating DISK wd0
Sep 17 15:47:52 adsl /kernel.old: ata0-slave: success setting UDMA2 on VIA
chip
Sep 17 15:47:52 adsl /kernel.old: ad1: <Maxtor 91080D5/GAS6C712> ATA-4 disk
at ata0 as slave
Sep 17 15:47:52 adsl /kernel.old: ad1: 10300MB (21095424 sectors), 20928
cyls, 16 heads, 63 S/T, 512 B/S
Sep 17 15:47:52 adsl /kernel.old: ad1: 16 secs/int, 1 depth queue, UDMA33
Sep 17 15:47:52 adsl /kernel.old: ad1: piomode=4 dmamode=2 udmamode=2
cblid=0
Sep 17 15:47:52 adsl /kernel.old: Creating DISK ad1
Sep 17 15:47:52 adsl /kernel.old: Creating DISK wd1
Sep 17 15:47:52 adsl /kernel.old: ata1-master: piomode=4 dmamode=2
udmamode=2 dmaflag=1
Sep 17 15:47:52 adsl /kernel.old: ata1-master: success setting UDMA2 on VIA
chip
Sep 17 15:47:52 adsl /kernel.old: acd0: <Pioneer DVD-ROM ATAPIModel DVD-104S
0123/E1.23> DVD-ROM drive at ata1 as master
Sep 17 15:47:52 adsl /kernel.old: acd0: 512KB buffer, UDMA33
Sep 17 15:47:52 adsl /kernel.old: acd0: Reads: CD-R, CD-RW, CD-DA stream,
DVD-ROM, DVD-R
Sep 17 15:47:52 adsl /kernel.old: acd0: Audio: play, 256 volume levels
Sep 17 15:47:52 adsl /kernel.old: acd0: Mechanism: ejectable tray
Sep 17 15:47:52 adsl /kernel.old: acd0: Medium: no/blank disc inside,
unlocked
Sep 17 15:47:52 adsl /kernel.old: Waiting 8 seconds for SCSI devices to
settle
Sep 17 15:47:52 adsl /kernel.old: (noperiph:ahc0:0:-1:-1): SCSI bus reset
delivered. 0 SCBs aborted.
Sep 17 15:47:52 adsl /kernel.old: (probe5:ahc0:0:5:0): INQUIRY. CDB: 12 1 80
0 ff 0
Sep 17 15:47:52 adsl /kernel.old: (probe5:ahc0:0:5:0): ILLEGAL REQUEST
asc:24,0
Sep 17 15:47:52 adsl /kernel.old: (probe5:ahc0:0:5:0): Invalid field in CDB
Sep 17 15:47:52 adsl /kernel.old: ahc0: target 5 synchronous at 8.0MHz,
offset = 0xf
Sep 17 15:47:52 adsl /kernel.old: Creating DISK cd0
Sep 17 15:47:52 adsl /kernel.old: Mounting root from ufs:ad0s3a
Sep 17 15:47:52 adsl /kernel.old: ad0s1: type 0xc, start 11358018, end =
23840459, size 12482442 : OK
Sep 17 15:47:52 adsl /kernel.old: ad0s3: type 0xa5, start 63, end =
11357954, size 11357892 : OK
Sep 17 15:47:52 adsl /kernel.old: (cd0:ahc0:0:5:0): READ CD RECORDED
CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
Sep 17 15:47:52 adsl /kernel.old: (cd0:ahc0:0:5:0): NOT READY asc:3a,1
Sep 17 15:47:52 adsl /kernel.old: (cd0:ahc0:0:5:0): Medium not present -
tray closed
Sep 17 15:47:52 adsl /kernel.old: cd0 at ahc0 bus 0 target 5 lun 0
Sep 17 15:47:52 adsl /kernel.old: cd0: <YAMAHA CRW4416S 1.0j> Removable
CD-ROM SCSI-2 device
Sep 17 15:47:52 adsl /kernel.old: cd0: 8.333MB/s transfers (8.333MHz, offset
15)
Sep 17 15:47:52 adsl /kernel.old: cd0: Attempt to query device size failed:
NOT READY, Medium not present - tray closed
Sep 17 15:47:52 adsl /kernel.old: start_init: trying /sbin/init
Sep 17 15:47:52 adsl /kernel.old: ad1s1: type 0xc, start 63, end = 21093344,
size 21093282 : OK
Sep 17 15:47:52 adsl /kernel.old: ad1s3: type 0x0, start 0, end =
4294967295, size 0
Sep 17 15:47:52 adsl /kernel.old: ad1s3: C/H/S start 1022/254/63 (16434494)
!= start 0: invalid
Sep 17 15:47:52 adsl /kernel.old: ad1s3: C/H/S end 1022/254/63 (16434494) !=
end 4294967295: invalid
and here's the current output:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-BETA #0: Sun Nov 12 18:09:34 GMT 2000
root@not.irrelevant.org:/usr/obj/usr/src/sys/SIMOND
Calibrating clock(s) ... TSC clock: 655788420 Hz, i8254 clock: 1193089 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD Athlon(tm) Processor (655.85-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x630 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
associative
L2 internal cache: 1 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 268353536 (262064K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00361000 - 0x0ffe3fff, 264777728 bytes (64643 pages)
avail memory = 258023424 (251976K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f92a0
bios32: Entry = 0xf0ef0 (c00f0ef0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x10f0
pnpbios: Found PnP BIOS data at 0xc00fc2b0
pnpbios: Entry = f0000:c2e0 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
ACPI: 000f6730
Preloaded elf kernel "kernel" at 0xc0348000.
Pentium Pro MTRR support enabled
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106)
pcib-: pcib0 exists, using next available unit number
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1106, dev=0x0305, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e0000000, size 27
found-> vendor=0x1106, dev=0x8305, revid=0x00
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x1106, dev=0x0686, revid=0x22
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0x0571, revid=0x10
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000d800, size 4
found-> vendor=0x1106, dev=0x3038, revid=0x10
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=9
map[20]: type 1, range 32, base 0000d400, size 5
found-> vendor=0x1106, dev=0x3038, revid=0x10
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=9
map[20]: type 1, range 32, base 0000d000, size 5
found-> vendor=0x1106, dev=0x3057, revid=0x30
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x10b8, dev=0x0005, revid=0x06
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base 0000a400, size 8
map[14]: type 1, range 32, base dc000000, size 12
found-> vendor=0x1274, dev=0x1371, revid=0x06
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000a000, size 6
found-> vendor=0x9004, dev=0x6178, revid=0x03
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 00009800, size 8
map[14]: type 1, range 32, base db800000, size 12
found-> vendor=0x105a, dev=0x0d30, revid=0x02
class=01-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 00009400, size 3
map[14]: type 1, range 32, base 00009000, size 2
map[18]: type 1, range 32, base 00008800, size 3
map[1c]: type 1, range 32, base 00008400, size 2
map[20]: type 1, range 32, base 00008000, size 6
map[24]: type 1, range 32, base db000000, size 17
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at device
0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib2: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0
found-> vendor=0x102b, dev=0x0525, revid=0x04
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base de000000, size 25
map[14]: type 1, range 32, base dd000000, size 14
map[18]: type 1, range 32, base dc800000, size 23
pci1: <PCI bus> on pcib2
pci1: <Matrox MGA G400 AGP graphics accelerator> (vendor=0x102b, dev=0x0525)
at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on
pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd800
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x1
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd808
ata1: mask=00 status0=50 status1=00
ata1: probe allocation failed
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 4.2 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device 4.3 on
pci0
using shared irq9.
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
tx0: <SMC EtherPower II 10/100> port 0xa400-0xa4ff mem 0xdc000000-0xdc000fff
irq 5 at device 10.0 on pci0
miibus0: <MII bus> on tx0
nsphy0: <QS6612 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tx0: address 00:e0:29:0b:d5:31, type SMC9432TX
bpf: tx0 attached
pcm0: <AudioPCI ES1371> port 0xa000-0xa03f irq 10 at device 11.0 on pci0
pcm0: ac97 codec id 0x54524102
pcm0: ac97 codec features 6 bit master volume, Binaura 3D Audio Enhancement
pcm: setmap fcd0000, 1000; 0xc0c3c000 -> fcd0000
pcm: setmap fc9b000, 1000; 0xc0c47000 -> fc9b000
ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0x9800-0x98ff mem
0xdb800000-0xdb800fff irq 11 at device 12.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable is present, internal 68 cable not present
ahc0: external cable not present
ahc0: BIOS eeprom not present
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 436 instructions downloaded
aic7860: Single Channel A, SCSI Id=7, 3/255 SCBs
atapci1: <Promise ATA100 controller> port
0x8000-0x803f,0x8400-0x8403,0x8800-0x8807,0x9000-0x9003,0x9400-0x9407 mem
0xdb000000-0xdb01ffff irq 10 at device 17.0 on pci0
ata-: ata2 exists, using next available unit number
ata2: iobase=0x9400 altiobase=0x9002 bmaddr=0x8000
ata2: mask=03 status0=50 status1=00
ata2: mask=03 status0=50 status1=00
ata2: devices = 0x1
ata2: at 0x9400 on atapci1
using shared irq10.
ata3: iobase=0x8800 altiobase=0x8402 bmaddr=0x8008
ata3: mask=00 status0=ff status1=ff
ata3: probe allocation failed
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106)
pci-: pci1 exists, using next available unit number
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: ds0 attached
bpf: lo0 attached
bpf: ppp0 attached
bpf: ppp1 attached
new masks: bio 684640, tty 63149a, net 6714ba
Linux-ELF exec handler installed
IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled
ata0-master: success setting UDMA4 on VIA chip
Creating DISK ad0
Creating DISK wd0
ad0: <IBM-DPTA-372050/P76OA30A> ATA-4 disk at ata0-master
ad0: 2016MB (4128768 sectors), 4096 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad0: 2016MB <IBM-DPTA-372050> [4096/16/63] at ata0-master UDMA66
ata2-master: success setting UDMA5 on Promise chip
Creating DISK ad4
Creating DISK wd4
ad4: <IBM-DTLA-307045/TX6OA50C> ATA-5 disk at ata2-master
ad4: 43979MB (90069840 sectors), 89355 cyls, 16 heads, 63 S/T, 512 B/S
ad4: 16 secs/int, 1 depth queue, UDMA100
ad4: piomode=4 dmamode=2 udmamode=5 cblid=1
Promise check1 failed
ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master UDMA100
Waiting 8 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(probe5:ahc0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe5:ahc0:0:5:0): ILLEGAL REQUEST asc:24,0
(probe5:ahc0:0:5:0): Invalid field in CDB
(ahc0:A:5:0): Sending SDTR period c, offset f
(ahc0:A:5:0): Received SDTR period 1e, offset f
Filtered to period 1e, offset f
ahc0: target 5 synchronous at 8.0MHz, offset = 0xf
(ahc0:A:5:0): Sending SDTR period 1e, offset f
(ahc0:A:5:0): Received SDTR period 1e, offset f
Filtered to period 1e, offset f
Creating DISK cd0
pass0 at ahc0 bus 0 target 5 lun 0
pass0: <YAMAHA CRW4416S 1.0j> Removable CD-ROM SCSI-2 device
pass0: 8.333MB/s transfers (8.333MHz, offset 15)
Mounting root from ufs:/dev/ad0s3a
(ahc0:A:5:0): Sending SDTR period 1e, offset f
(ahc0:A:5:0): Received SDTR period 1e, offset f
Filtered to period 1e, offset f
(ahc0:A:5:0): Sending SDTR period 1e, offset f
(ahc0:A:5:0): Received SDTR period 1e, offset f
Filtered to period 1e, offset f
(cd0:ahc0:0:5:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ahc0:0:5:0): NOT READY asc:3a,1
(cd0:ahc0:0:5:0): Medium not present - tray closed
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <YAMAHA CRW4416S 1.0j> Removable CD-ROM SCSI-2 device
cd0: 8.333MB/s transfers (8.333MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
ad0s1: type 0xc, start 11358018, end = 32499494, size 21141477 : OK
ad0s3: type 0xa5, start 63, end = 11357954, size 11357892 : OK
ad0s1: slice starts beyond end of the disk: rejecting it
ad0s3: slice extends beyond end of disk: truncating from 11357892 to 4128705
sectors
ad0: raw partition size != slice size
ad0: start 63, end 4128767, size 4128705
ad0c: start 63, end 11357954, size 11357892
ad0: truncating raw partition
ad0: rejecting partition in BSD label: it isn't entirely within the slice
ad0: start 63, end 4128767, size 4128705
ad0f: start 819263, end 11357954, size 10538692
start_init: trying /sbin/init
ad4s1: type 0xc, start 63, end = 90060389, size 90060327 : OK
Thanks if anyone can help me with this!
--
Simon Dick
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002801c0aa57$b0c808b0$fb587ec2>