Date: Sat, 30 Aug 2003 01:30:50 +0100 From: Pete Bentley <pete@sorted.org> To: freebsd-sparc64@freebsd.org Subject: Re: Netra X1 - Status query and stupid question Message-ID: <352D3384-DA81-11D7-8C90-000A959F6E56@sorted.org> In-Reply-To: <20030822013101.A24406@newtrinity.zeist.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday, August 22, 2003, at 12:31 AM, Marius Strobl wrote: > Just curious, could you please try the attached patch and check if the > MAC addresses get set and then set local-mac-address in the > OpenFirmware > and check again if the dc interfaces get different MAC addresses? Sorry for being a bit slow here, had other issues to deal with. I've just tried this patch - applies fine, builds fine (prevents the dc module from building, but I simply disabled that as a workaround). Tried it with and without local-mac-address set and with versions 1.0.1 and 1.0.18 of the Netra boot PROM and it works the same in all 4 instances... Works the same as Solaris 9, that is dc0 gets the hosts's MAC address and dc1 gets that address 'plus 1' (see output below). So in effect, local-mac-address is ignored but in a way that isn't likely to matter. Oh, and I guess my earlier reading of the patch was wrong too, sorry. Thanks for the patch - definitely better than hacking via an rc.d script. Pete. ------------------------------------------------- Sun Netra X1 (UltraSPARC-IIe 400MHz), No Keyboard OpenBoot 4.0, 640 MB memory installed, Serial #50735782. Ethernet address 0:3:ba:6:2a:a6, Host ID: 83062aa6. [...] dc0: <Davicom DM9102A 10/100BaseTX> port 0x10000-0x100ff at device 12.0 on pci0 dc0: Ethernet address: 00:03:ba:06:2a:a6 miibus0: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc1: <Davicom DM9102A 10/100BaseTX> port 0x10100-0x101ff mem 0x2000-0x20ff at device 5.0 on pci0 dc1: Ethernet address: 00:03:ba:06:2a:a7 miibus1: <MII bus> on dc1 ukphy1: <Generic IEEE 802.3u media interface> on miibus1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?352D3384-DA81-11D7-8C90-000A959F6E56>