Date: Tue, 11 Apr 2000 14:50:32 -0400 From: David David <ddavid@ican.net> To: freebsd-questions@freebsd.org Subject: Scanner and Sound setup Message-ID: <38F373F8.3B790788@ican.net>
next in thread | raw e-mail | index | archive | help
Would anyone have some idea's on setting up an HP ScannJet 5P on FreeBSD4.0? The scsi cards that came with it, is a 53c416, but from what i have been able to gather so far is there are no drivers for it in FreeBSD. Now, a dmesg show's " unknown: <SYM 53C416> at port 0x220-0x23f irq5 on isa0" So does this mean that there is support and its just not set up in the kernel, or is this just on account of the PNP probing from the kernel?. I have PNPBIOS set in the kernel, which was required for PCM, for my vibra 16 card i have. ( according to Lint ) Kernel version--> 4.0-STABLE ( from uname -a ) On a side note, unknown0: <PNP0000> at port 0x20-0x21,0xa0-0xa1 irq 2 on isa0 unknown1: <PNP0200> at port 0-0xf,0x81-0x83,0x87,0x89-0x8b,0x8f-0x91,0xc0-0xdf drq 4 on isa0 unknown2: <PNP0100> at port 0x40-0x43 irq 0 on isa0 unknown3: <PNP0b00> at port 0x70-0x71 irq 8 on isa0 unknown: <PNP0303> can't assign resources unknown: <PNP0800> can't assign resources unknown4: <PNP0c04> at port 0xf0-0xff irq 13 on isa0 unknown5: <PNP0c01> at iomem 0-0x9ffff,0xfffe0000-0xffffffff,0xfec00000-0xfec0ffff,0xfee00000-0xfee0ffff,0x100000-0xfffffff on isa0 unknown6: <PNP0c02> at iomem 0xf0000-0xf3fff,0xf4000-0xf7fff,0xf8000-0xfbfff,0xfc000-0xfffff on isa0 unknown7: <PNP0a03> at port 0x294-0x297,0x4d0-0x4d1,0xcf8-0xcff,0x480-0x48f,0x5800-0x583f,0x5000-0x501f on isa0 unknown: <PNP0f13> can't assign resources unknown8: <PNP0c02> at port 0x208-0x20f on isa0 unknown: <PNP0501> can't assign resources unknown: <PNP0700> can't assign resources unknown: <PNP0401> can't assign resources unknown9: <SYM 53C416> at port 0x220-0x23f irq 5 on isa0 I'm assuming this is because PNPBIOS is in the kernel, but is there anyway of stoping this type of output, or preventing it all together? Another issue here is that, while running Linux, the io and irq for the sound card is listed as what the SYM card above is set on, with the sound card now set as such, sbc0: <Creative ViBRA16X> at port 0x240-0x24f,0x300-0x301,0x388-0x38b irq 9 drq 0,1 on isa0 sbc0: setting card to irq 9, drq 0, 1 pcm0: <SB DSP 4.16 (ViBRA16X)> on sbc0 With the SYM card set as 0x240 and irq 10, far different than what it is here. The sound works fine for cd's right now, but with most of my MP3 there is a terrible scratching noise, which only goes away ( for some ) by restarting the playing 2 or 3 times. Not sure if any more info is required, but i can send the full dmesg, there's also some device probing going on that is not set up in the kernel ( see below ), I can also forward my conf file if required. Thanks..... David CPU: Pentium II/Pentium II Xeon/Celeron (360.86-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 268435456 (262144K bytes) config> di pcic0 No such device: pcic0 Invalid command or syntax. Type `?' for help. config> di sio1 No such device: sio1 Invalid command or syntax. Type `?' for help. config> di sn0 No such device: sn0 Invalid command or syntax. Type `?' for help. config> di lnc0 No such device: lnc0 Invalid command or syntax. Type `?' for help. config> di le0 No such device: le0 Invalid command or syntax. Type `?' for help. config> di ie0 No such device: ie0 Invalid command or syntax. Type `?' for help. config> di fe0 No such device: fe0 Invalid command or syntax. Type `?' for help. config> di ed0 No such device: ed0 Invalid command or syntax. Type `?' for help. config> di cs0 No such device: cs0 Invalid command or syntax. Type `?' for help. config> di bt0 No such device: bt0 Invalid command or syntax. Type `?' for help. config> di aic0 No such device: aic0 Invalid command or syntax. Type `?' for help. config> di aha0 No such device: aha0 Invalid command or syntax. Type `?' for help. config> di adv0 No such device: adv0 Invalid command or syntax. Type `?' for help. config> q To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38F373F8.3B790788>