Date: Tue, 13 May 2008 15:53:24 -0700 From: Greg Himes <greg@laaco.net> To: freebsd-questions@freebsd.org Subject: Troubleshooting Qlogic isp Panic Message-ID: <FA0C7158-3EBB-4C95-8A09-AF9BFE81970C@laaco.net>
next in thread | raw e-mail | index | archive | help
Hello All,
Last week, one half of my dual port Qlogic fibre channel interface
started causing a page fault panic while probing the second port at
boot time.
I was able to get the system back up by disabling the BIOS on the
second port. The system still sees the 2nd port, but politely
displays a few errors, then continues on.
This all started after I powered the system down for maintenance.
System is running FreeBSD 6.3-RELEASE i386
What is the proper way to help debug this problem?
Listed below is the current dmesg.boot info:
FreeBSD 6.3-RELEASE #6: Fri Feb 29 19:39:26 PST 2008
greg@mail2.laaco.net:/usr/obj/usr/src/sys/LAACO
module_register: module pci/bce already exists!
Module pci/bce failed to register: 17
module_register: module bce/miibus already exists!
Module bce/miibus failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (3000.12-MHz 686-
class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM
,DCA>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 3487916032 (3326 MB)
avail memory = 3409035264 (3251 MB)
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
...
isp0: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0x5000-0x50ff mem
0xfdff0000-0xfd
ff3fff irq 19 at device 0.0 on pci19
isp0: [GIANT-LOCKED]
isp0: Board Type 2422, Chip Revision 0x2, resident F/W Revision 4.0.70
isp1: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0x5400-0x54ff mem
0xfdfe0000-0xfd
fe3fff irq 16 at device 0.1 on pci19
isp1: [GIANT-LOCKED]
isp1: Polled Mailbox Command (0x8) Timeout (100000us)
isp1: Polled Mailbox Command (0x8) Timeout (100000us)
isp1: Mailbox Command 'ABOUT FIRMWARE' failed (TIMEOUT)
device_attach: isp1 attach returned 6
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?FA0C7158-3EBB-4C95-8A09-AF9BFE81970C>