Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 11 Dec 2000 13:00:18 -0600 (CST)
From:      Reverend K Kanno <presence@churchofinformationwarfare.org>
To:        David Miller <dmiller@sparks.net>
Cc:        freebsd-scsi@freebsd.org
Subject:   Re: LUN 1 on 3.2-R?
Message-ID:  <Pine.NEB.3.96.1001211125722.44019C-100000@shell-1.enteract.com>
In-Reply-To: <Pine.BSF.4.21.0012111337570.8976-100000@search.sparks.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 11 Dec 2000, David Miller wrote:

What SCSI HA are you using? It seems lots of HAs dont' properly support LUNs. 
For instance, I have yet to see an onboard Adaptec Dell SCSI HA that works
with an Infortrend or Chapparal controller.

 > Hi All:)
> 
> I'm stumped.  I have a 3.2R system with an attached external SCSI-SCSI
> RAID controller.  I had a nice 10 drive array last year with 36 GB drives,
> and this year I'm adding on another nice array.
> 
> I have this in my config file:
> 
> # SCSI peripherals
> # Only one of each of these is needed, they are dynamically allocated.
> controller      scbus0          # SCSI bus (required)
> # device                da0             # Direct Access (disks)
> disk          da0 at scbus0 target 2 unit 0
> disk          da1 at scbus0 target 2 unit 1
> device          sa0             # Sequential Access (tape etc)
> device          cd0             # CD
> device          pass0           # Passthrough device (direct SCSI)
> 
> 
> But in dmesg I get:
> 
> Waiting 5 seconds for SCSI devices to settle
> pass1 at ahc0 bus 0 target 2 lun 1
> pass1: <CHAPTEC G5312 G2.2> Fixed Processor SCSI-2 device 
> pass1: 80.000MB/s transfers (40.000MHz, offset 127, 16bit), Tagged
> Queueing Enabled
> pass2 at ahc0 bus 0 target 2 lun 2
> pass2: <JMR ELEC FORTRA SERIES. 1.00> Fixed Processor SCSI-2 device 
> pass2: 80.000MB/s transfers (40.000MHz, offset 127, 16bit)
> da0 at ahc0 bus 0 target 2 lun 0
> da0: <CHAPTEC G5312 G2.2> Fixed Direct Access SCSI-2 device 
> da0: 80.000MB/s transfers (40.000MHz, offset 127, 16bit), Tagged Queueing
> Enabled
> da0: 279097MB (571591680 512 byte sectors: 255H 63S/T 35579C)
> changing root device to wd0s1a
> 
> 
> camcontrol devlist:
> 
> su-2.03# camcontrol devlist
> <CHAPTEC G5312 G2.2>               at scbus0 target 2 lun 0 (pass0,da0)
> <CHAPTEC G5312 G2.2>               at scbus0 target 2 lun 1 (pass1)
> <JMR ELEC FORTRA SERIES. 1.00>     at scbus0 target 2 lun 2 (pass2)
> 
> 
> The associated da* and pass* devices seem to exist.
> 
> What am I missing?
> 
> Thanks in advance,
> 
> --- David
> 
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-scsi" in the body of the message
> 
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.NEB.3.96.1001211125722.44019C-100000>