From owner-freebsd-current Sat Apr 1 12:57:13 2000 Delivered-To: freebsd-current@freebsd.org Received: from rtp.tfd.com (rtp.tfd.com [198.79.53.206]) by hub.freebsd.org (Postfix) with ESMTP id 72E4B37B655 for ; Sat, 1 Apr 2000 12:57:00 -0800 (PST) (envelope-from kent@lab1.tfd.com) Received: from lab1.tfd.com (lab1.tfd.com [10.9.200.31]) by rtp.tfd.com (8.9.3/8.9.3) with SMTP id PAA06275 for ; Sat, 1 Apr 2000 15:57:30 -0500 (EST) Received: by lab1.tfd.com id AA24992 (5.67b/IDA-1.5 for current@freebsd.org); Sat, 1 Apr 2000 15:54:57 -0500 Date: Sat, 1 Apr 2000 15:54:57 -0500 From: Kent Hauser Message-Id: <200004012054.AA24992@lab1.tfd.com> To: current@freebsd.org Subject: no audio with newpcm driver on TP600E Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I'm having problems with the newpcm driver. Basically, I can't get audio from the speakers. This while trying to play a cd. The output of mixer looks reasonable. Hardware is a ThinkPad 600E. "audio" portions of the config attached along with the output of dmesg. Help would be greatly appreciated. Thanks, Kent =============== # For PnP/PCI sound cards #device pcm #device sbc #device csa # For non-PnP cards: device pcm0 at isa? irq 10 drq 1 flags 0x0 device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15 device csa device gusc0 at isa? port 0x220 irq 5 drq 1 flags 0x13 # Not controlled by `snd' device pca0 at isa? port IO_TIMER1 device matcd0 at isa? port 0x230 ============= Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 5.0-20000331-SNAP #5: Sat Apr 1 20:32:28 GMT 2000 kent@kent.tfd.com:/usr/src/sys/compile/TP Calibrating clock(s) ... TSC clock: 297777462 Hz, i8254 clock: 1193150 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (297.79-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff real memory = 66912256 (65344K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x003ce000 - 0x03fc7fff, 62889984 bytes (15354 pages) avail memory = 61317120 (59880K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fd800 bios32: Entry = 0xfd820 (c00fd820) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x0 pnpbios: Found PnP BIOS data at 0xc00fe700 pnpbios: Entry = f0000:e724 Rev = 1.0 pnpbios: Event flag at 415 Other BIOS signatures found: ACPI: 000fd6e0 Preloaded elf kernel "kernel" at 0xc03b5000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x000038c8 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) npx0: on motherboard npx0: INT 16 interface apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcib0: on motherboard found-> vendor=0x8086, dev=0x7190, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base 40000000, size 26, enabled found-> vendor=0x8086, dev=0x7191, revid=0x02 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x104c, dev=0xac1d, revid=0x00 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=4 secondarybus=2 intpin=a, irq=11 map[10]: type 1, range 32, base 50102000, size 12, enabled found-> vendor=0x104c, dev=0xac1d, revid=0x00 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=7 secondarybus=5 intpin=b, irq=11 map[10]: type 1, range 32, base 50101000, size 12, enabled found-> vendor=0x1013, dev=0x6001, revid=0x01 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 50100000, size 12, enabled map[14]: type 1, range 32, base 50000000, size 20, enabled found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000fcf0, size 4, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=11 map[20]: type 1, range 32, base 00008400, size 5, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 0000efa0, size 4, enabled pci0: on pcib0 pcib1: at device 1.0 on pci0 found-> vendor=0x10c8, dev=0x0005, revid=0x12 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base d0000000, size 24, enabled map[14]: type 1, range 32, base 70000000, size 22, enabled map[18]: type 1, range 32, base 70400000, size 20, enabled pci1: on pcib1 pci1: (vendor=0x10c8, dev=0x0005) at 0.0 irq 11 pcic-pci0: mem 0x50102000-0x50102fff irq 11 at device 2.0 on pci0 pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC parallel isa irq] pcic-pci0: Legacy address set to 0x3e0 PCI Config space: 00: ac1d104c 02100007 06070000 0082a808 10: 50102000 020000a0 b0040200 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c0010b 40: 00eb1014 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 00449060 00000000 09818948 fba97543 90: 606282c0 00000000 00000000 00000000 Cardbus Socket registers: 00: 0000000f: 00000000: 30000710: 00000000: 10: 00000000: 00000000: 00000000: 00000000: ExCa registers: 00: 83 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 pcic-pci1: mem 0x50101000-0x50101fff irq 11 at device 2.1 on pci0 pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC parallel isa irq] PCI Config space: 00: ac1d104c 02100007 06070000 0082a808 10: 50101000 020000a0 b0070500 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c0020b 40: 00eb1014 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 00449060 00000000 09818948 fba97543 90: 606282c0 00000000 00000000 00000000 Cardbus Socket registers: 00: 00000000: 00000000: 30000306: 00000000: 10: 00000000: 00000000: 00000000: 00000000: ExCa registers: 00: 83 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 csa0: mem 0x50000000-0x500fffff,0x50100000-0x50100fff irq 11 at device 6.0 on pci0 pcm0: on csa0 pcm0: ac97 codec id 0x 0 pcm0: ac97 codec features 5 bit master volume, pcm0: ac97 codec reports dac not ready pcm: setmap 3e73000, 1000; 0xc08bf000 -> 3e73000 pcm: setmap 3e60000, 1000; 0xc08cc000 -> 3e60000 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xfcf0-0xfcff at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8 ata1: mask=03 status0=50 status1=01 ata1: mask=03 status0=00 status1=01 ata1: devices = 0x4 ata1: at 0x170 irq 15 on atapci0 pci0: (vendor=0x8086, dev=0x7112) at 7.2 irq 11 chip1: port 0xefa0-0xefaf at device 7.3 on pci0 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number pcm-: pcm0 exists, using next available unit number ex_isa_identify() isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x54ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: status 10 00 64 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0: at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic0: management irq 10 pccard0: on pcic0 pccard1: on pcic0 pcic1: not probed (disabled) sio0: irq maps: 0x445 0x455 0x445 0x445 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A ppc0: parallel port found at 0x3bc ppc0: cannot reserve I/O port range isa_compat: didn't get irq for lnc mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) sbc0: at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0 pcm2: on sbc0 pcm: setmap 6000, 2000; 0xc577e000 -> 6000 pcm: setmap 8000, 2000; 0xc5780000 -> 8000 pca0 at port 0x40 on isa0 isa_probe_children: probing PnP devices BIOS Geometries: 0:033fef3f 0..831=832 cylinders, 0..239=240 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: sl0 attached bpf: ppp0 attached new masks: bio 4008c040, tty 40031832, net 40071832 bpf: lo0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: stf0 attached bpf: faith0 attached IPsec: Initialized Security Association Processing. ata0-master: success setting up UDMA2 mode on PIIX4 chip ad0: ATA-4 disk at ata0 as master ad0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 Creating DISK ad0 Creating DISK wd0 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting up PIO4 mode on generic chip acd0: DVD-ROM drive at ata1 as master acd0: read 1031KB/s (3437KB/s), 512KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, packet acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked Mounting root from ufs:/dev/ad0s2a pccard: card inserted, slot 0 ad0s1: type 0x6, start 63, end = 4188239, size 4188177 : OK ad0s2: type 0xa5, start 4188240, end = 12594959, size 8406720 : OK start_init: trying /sbin/init pcic: I/O win 0 flags 11 2e8-2ef pcic: I/O win 0 flags 1 2e8-2ef sio2 at port 0x2e8-0x2ef irq 3 slot 0 on pccard0 pcic: I/O win 0 flags 11 2e8-2ef sio2: type 16550A bpf: tun0 attached To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message