From owner-freebsd-stable  Fri Apr  5 11:20:55 2002
Delivered-To: freebsd-stable@freebsd.org
Received: from mail.communityconnect.com (mail.communityconnect.com [209.10.169.57])
	by hub.freebsd.org (Postfix) with ESMTP id 96D5237B41C
	for <freebsd-stable@freebsd.org>; Fri,  5 Apr 2002 11:20:15 -0800 (PST)
Received: from amavis by mail.communityconnect.com with scanned-ok (Exim 3.20 #1)
	id 16tZFt-00022V-00
	for freebsd-stable@freebsd.org; Fri, 05 Apr 2002 14:20:13 -0500
Received: from [192.168.101.26] (helo=utterlux.hq.communitconnect.com)
	by mail.communityconnect.com with esmtp (Exim 3.20 #1)
	id 16tZFn-0001nZ-00; Fri, 05 Apr 2002 14:20:07 -0500
Date: Fri, 5 Apr 2002 14:20:10 -0500 (EST)
From: Marius <marius@mail.communityconnect.com>
X-X-Sender:  <marius@utterlux.hq.communitconnect.com>
To: "Karsten W. Rohrbach" <karsten@rohrbach.de>
Cc: <freebsd-stable@freebsd.org>
Subject: Re: UDP problems in 4.5-STABLE
In-Reply-To: <20020405205026.A51651@mail.webmonster.de>
Message-ID: <Pine.BSF.4.33.0204051401360.58305-100000@utterlux.hq.communitconnect.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-stable@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-stable.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-stable>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-stable>
X-Loop: FreeBSD.ORG


Hmmm... I am not getting much in the way of errors from the cards.  Unless
we consider 72 a lot for a week+ of uptime.

netstat -i
Name  Mtu   Network    Address           Ipkts     Ierrs Opkts Oerrs
Coll
fxp0  1500  <Link#1>   00:e0:81:10:8a:15 353630296  0    450155519  2  0
fxp0  1500  192.168.2  cc17.internal.c   350696858  -    450143135  -  -
fxp1  1500  <Link#2>   00:90:27:5a:79:46 1043267759 72   775703449  0  0
fxp1  1500  192.168.1  cc17.communityc   1028183023 -    775682407  -  -
lp0*  1500  <Link#3>                     0          0    0          0  0
lo0   16384 <Link#4>                     24         0    24         0  0
lo0   16384 your-net   localhost.commu   0          -    0          -  -


As for a soundcard.  Were do you see a soundcard? I do not think I have
one.  And if I do have one, well, it certainly is not doing anything.
These are rack mounted machines in a data warehouse. :-)

-Marius M. Rex



On Fri, 5 Apr 2002, Karsten W. Rohrbach wrote:

> what does your 'netstat' -i say? if you see [io]errs it might be an
> autonegotiation problem of your network card.
>
> do you get stray interrupts from your ess1371 soundcard?
>
> /k
>
> Marius(marius@mail.communityconnect.com)@2002.04.05 13:43:35 +0000:
> >
> >
> > ifconfig -au
> > fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> >         inet 192.168.2.17 netmask 0xffffff00 broadcast 192.168.2.255
> >         ether 00:e0:81:10:8a:15
> >         media: Ethernet autoselect (100baseTX <full-duplex>)
> >         status: active
> > fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> >         inet 192.168.1.17 netmask 0xffffff00 broadcast 192.168.1.255
> >         ether 00:90:27:5a:79:46
> >         media: Ethernet autoselect (100baseTX <full-duplex>)
> >         status: active
> > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
> >         inet 127.0.0.1 netmask 0xff000000
> >
> >
> >
> > cat /var/run/dmesg.boot
> > Copyright (c) 1992-2002 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> >         The Regents of the University of California. All rights reserved.
> > FreeBSD 4.5-STABLE #1: Wed Mar 27 00:18:48 EST 2002
> >     root@cc17:/usr/obj/usr/src/sys/CCI_KERNEL
> > Timecounter "i8254"  frequency 1193182 Hz
> > CPU: Pentium III/Pentium III Xeon/Celeron (601.37-MHz 686-class CPU)
> >   Origin = "GenuineIntel"  Id = 0x681  Stepping = 1
> > Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> > CMOV,PAT,PSE36,MMX,FXSR,SSE>
> > real memory  = 1073741824 (1048576K bytes)
> > avail memory = 1041117184 (1016716K bytes)
> > Programming 24 pins in IOAPIC #0
> > IOAPIC #0 intpin 2 -> irq 0
> > FreeBSD/SMP: Multiprocessor motherboard
> >  cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
> >  cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
> >  io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
> > Preloaded elf kernel "kernel" at 0xc03dd000.
> > Pentium Pro MTRR support enabled
> > md0: Malloc disk
> > npx0: <math processor> on motherboard
> > npx0: INT 16 interface
> > pcib0: <Intel 82443GX host to PCI bridge> on motherboard
> > IOAPIC #0 intpin 16 -> irq 2
> > IOAPIC #0 intpin 18 -> irq 9
> > IOAPIC #0 intpin 19 -> irq 10
> > IOAPIC #0 intpin 17 -> irq 11
> > pci0: <PCI bus> on pcib0
> > pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
> > pci1: <PCI bus> on pcib2
> > isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
> > isa0: <ISA bus> on isab0
> > atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1
> > on pci0
> > ata0: at 0x1f0 irq 14 on atapci0
> > pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2
> > Timecounter "PIIX"  frequency 3579545 Hz
> > chip1: <Intel 82371AB Power management controller> port 0x440-0x44f at
> > device 7.3 on pci0
> > ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0xe000-0xe0ff mem
> > 0xffafd000-0xffafdfff irq 2 at device 11.0 on pci0
> > aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs
> > ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0xe400-0xe4ff mem
> > 0xffafe000-0xffafefff irq 2 at device 11.1 on pci0
> > aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/255 SCBs
> > pci0: <unknown card> (vendor=0x1274, dev=0x1371) at 12.0 irq 9
> > fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xee80-0xeebf mem
> > 0xff900000-0xff9fffff,0xffafc000-0xffafcfff irq 10 at device 13.0 on pci0
> > fxp0: Ethernet address 00:e0:81:10:8a:15
> > inphy0: <i82555 10/100 media interface> on miibus0
> > inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> > fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xed80-0xedbf mem
> > 0xff700000-0xff7fffff,0xffafb000-0xffafbfff irq 11 at device 15.0 on pci0
> > fxp1: Ethernet address 00:90:27:5a:79:46
> > inphy1: <i82555 10/100 media interface> on miibus1
> > inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> > pci0: <ATI Mach64-GV graphics accelerator> at 16.0 irq 2
> > pcib1: <Intel 82443GX host to AGP bridge> on motherboard
> > pci2: <PCI bus> on pcib1
> > orm0: <Option ROMs> at iomem
> > 0xc0000-0xc7fff,0xc8000-0xcd7ff,0xcd800-0xce7ff on isa0
> > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> > fdc0: FIFO enabled, 8 bytes threshold
> > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> > sc0: <System console> at flags 0x100 on isa0
> > sc0: VGA <16 virtual consoles, flags=0x300>
> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> > sio0: type 16550A
> > sio1 at port 0x2f8-0x2ff irq 3 on isa0
> > sio1: type 16550A
> > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> > ppi0: <Parallel I/O> on ppbus0
> > plip0: <PLIP network interface> on ppbus0
> > lpt0: <Printer> on ppbus0
> > lpt0: Interrupt-driven port
> > APIC_IO: Testing 8254 interrupt delivery
> > APIC_IO: routing 8254 via IOAPIC #0 intpin 2
> > Waiting 15 seconds for SCSI devices to settle
> > SMP: AP CPU #1 Launched!
> > Mounting root from ufs:/dev/da0s1a
> > da0 at ahc0 bus 0 target 0 lun 0
> > da0: <SEAGATE ST39103LW 0002> Fixed Direct Access SCSI-2 device
> > da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing
> > Enabled
> > da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
> > da1 at ahc0 bus 0 target 2 lun 0
> > da1: <SEAGATE ST39103LW 0002> Fixed Direct Access SCSI-2 device
> > da1: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing
> > Enabled
> > da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
> > cd0 at ahc1 bus 0 target 4 lun 0
> > cd0: <TOSHIBA CD-ROM XM-6401TA 1009> Removable CD-ROM SCSI-2 device
> > cd0: 20.000MB/s transfers (20.000MHz, offset 16)
> > cd0: Attempt to query device size failed: NOT READY, Medium not present
> >
> > > did you supply
> > >     options APIC_IO
> >
> > Yes, Indeed.
> >
> > -Marius M. Rex
> >
> >
> > On Fri, 5 Apr 2002, Karsten W. Rohrbach wrote:
> > > what does your
> > >     ifconfig -au
> > >     dmesg
> > > say?
> > >
> > > did you supply
> > >     options APIC_IO
> > > in your kernel config?
> > >
> > > regards,
> > > /k
> > >
> > > Marius(marius@mail.communityconnect.com)@2002.04.05 11:59:27 +0000:
> > > >
> > > > I recently upgraded a number of my machines to from 4.2-STABLE to
> > > > 4.5-STABLE.  Now I
> > > > think I am having trouble with sending/receiving large amounts of UDP
> > > > traffic.  Each system has two interfaces, one for web traffic on the front end,
> > > > and one for backend traffic.  The backend traffic is mainly UDP, NFS and a
> > > > distributed logging system called spread (http://www.spread.org/).  Spread
> > > > is multicasting out our internal access logs via mod_log Spread in apache.
> > > > (http://www.lethargy.org/mod_log_spread/index.html)
> > > >
> > > > Both NFS and spread logging are now both crawling along.  The apache error
> > > > logs are spewing out spread errors many times a second and my
> > > > daily reports are full of 'NFS
> > > > server not responding/NFS server alive again messages.'  Even with the
> > > > dumb-timer enabled (-d switch to the nfs mount)  I am still getting pages
> > > > and pages of NFS errors.
> > > >
> > > > I have searched in for a number of days for a significant change  between
> > > > STABLE 4.2 and 4.5, but have been unable to come up with a difference that would
> > > > cause this.  NFS is still working, and spread logs are still casting out
> > > > but with the vast amounts of errors...I am certainly this is hurting
> > > > performance significantly.   I can not imagine it is a card, as all four
> > > > machines were effected right after the upgrade.  No packet filters in
> > > > place, the backend interfaces are not connected to the outside.  I am
> > > > quite running out of ideas.
> > > >
> > > > Any one have a guess about what is going wrong?
> > > >
> > > >
> > > > So background info:
> > > >
> > > > uname -a
> > > > FreeBSD cc50 4.5-STABLE FreeBSD 4.5-STABLE #1: Wed Mar 27 00:03:01 EST
> > > > 2002     root@cc50:/usr/obj/usr/src/sys/CCI_KERNEL  i386
> > > >
> > > > sysctl -a |grep udp
> > > > net.inet.udp.checksum: 1
> > > > net.inet.udp.maxdgram: 9216
> > > > net.inet.udp.recvspace: 41600
> > > > net.inet.udp.log_in_vain: 0
> > > > net.inet.udp.blackhole: 0
> > > >
> > > > # netstat -m
> > > > 1567/11856/65536 mbufs in use (current/peak/max):
> > > >         1546 mbufs allocated to data
> > > >         21 mbufs allocated to packet headers
> > > > 1358/11250/16384 mbuf clusters in use (current/peak/max)
> > > > 25464 Kbytes allocated to network (51% of mb_map in use)
> > > > 0 requests for memory denied
> > > > 0 requests for memory delayed
> > > > 0 calls to protocol drain routines
> > > >
> > > > swapinfo
> > > > Device          1K-blocks     Used    Avail Capacity  Type
> > > > /dev/da0s1b       1048448     1040  1047408     0%    Interleaved
> > > > /dev/rda1s1b      3140548      852  3139696     0%    Interleaved
> > > > Total             4188996     1892  4187104     0%
> > > >
> > > > Interesting kernel parameters (IMHO):
> > > > maxusers        0
> > > > options         NMBCLUSTERS=16384
> > > > options         SMP                     # 2 500Mhz cpus
> > > >
> > > >
> > > >
> > > > Hmmm... could maxuser at '0' be biting me?  I will bet I set it to that
> > > > after upgrading to make use of the dynamic sizing.   Plenty of swap
> > > > though, so I did not think of that earlier.  Not sure how that would
> > > > factor in.
> > > >
> > > >
> > > > -Marius M. Rex
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > > > with "unsubscribe freebsd-stable" in the body of the message
> > >
> > > --
> > > > 130 Jahre Staubsauger.
> > > > Vorher hatte der Hamster quasi keine natuerlichen Feinde...
> > > KR433/KR11-RIPE -- WebMonster Community Founder -- nGENn GmbH Senior Techie
> > > http://www.webmonster.de/ -- ftp://ftp.webmonster.de/ -- http://www.ngenn.net/
> > > GnuPG 0x2964BF46 2001-03-15 42F9 9FFF 50D4 2F38 DBEE  DF22 3340 4F4E 2964 BF46
> > > My mail is GnuPG signed -- Unsigned ones are bogus -- http://www.gnupg.org/
> > > Please do not remove my address from To: and Cc: fields in mailing lists. 10x
> > >
> >
> > Do not try to solve all life's problems at once -- learn to dread each
> > day as it comes.
> >                 -- Donald Kaul
> > :wq
> >
> >
>
> --
> > Wenn in der Kueche alles stimmt, geht auch die Musik in Ordnung.
> KR433/KR11-RIPE -- WebMonster Community Founder -- nGENn GmbH Senior Techie
> http://www.webmonster.de/ -- ftp://ftp.webmonster.de/ -- http://www.ngenn.net/
> GnuPG 0x2964BF46 2001-03-15 42F9 9FFF 50D4 2F38 DBEE  DF22 3340 4F4E 2964 BF46
> My mail is GnuPG signed -- Unsigned ones are bogus -- http://www.gnupg.org/
> Please do not remove my address from To: and Cc: fields in mailing lists. 10x
>

Do not try to solve all life's problems at once -- learn to dread each
day as it comes.
                -- Donald Kaul
:wq




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message