From owner-freebsd-amd64@FreeBSD.ORG Fri Nov 3 09:31:26 2006 Return-Path: X-Original-To: freebsd-amd64@freebsd.org Delivered-To: freebsd-amd64@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2C95716A55A for ; Fri, 3 Nov 2006 09:31:26 +0000 (UTC) (envelope-from guido@gvr.org) Received: from gvr.gvr.org (gvr-gw.gvr.org [80.126.103.228]) by mx1.FreeBSD.org (Postfix) with ESMTP id C646A43D53 for ; Fri, 3 Nov 2006 09:31:24 +0000 (GMT) (envelope-from guido@gvr.org) Received: by gvr.gvr.org (Postfix, from userid 657) id 95924C0DE; Thu, 2 Nov 2006 16:17:42 +0100 (CET) Date: Thu, 2 Nov 2006 16:17:42 +0100 From: Guido van Rooij To: freebsd-amd64@freebsd.org Message-ID: <20061102151742.GA927@gvr.gvr.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Subject: Parallel port not probed on msi rs482m4 X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 03 Nov 2006 09:31:26 -0000 The port is configured in the bios as "bidirectional" and on io port 0x378. Yet I get: ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 ACPI is disabled as it hangs the boot proces. I've tried several different bios settings (ECP, EPP, both) and also different IO port ranges (0x278) to no avail. Any hints on what to do? -Guido device.hints: hint.ppc.0.at="isa" hint.ppc.0.irq="7" Full boot -v below: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-PRERELEASE #2: Thu Nov 2 14:41:03 CET 2006 guido@gvr.gvr.org:/usr/src/sys/amd64/compile/GVR Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8073b000. Preloaded elf obj module "/boot/kernel/geom_mirror.ko" at 0xffffffff8073b170. Preloaded elf obj module "/boot/kernel/cpufreq.ko" at 0xffffffff8073b7a0. Calibrating clock(s) ... i8254 clock: 1193211 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1994213198 Hz CPU: AMD Athlon(tm) 64 Processor 3200+ (1994.21-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20ff2 Stepping = 2 Features=0x78bfbff Features2=0x1 AMD Features=0xe2500800 AMD Features2=0x1 L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 1006632960 (960 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000838000 - 0x000000003a397fff, 968228864 bytes (236384 pages) avail memory = 962695168 (918 MB) random: nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: io: null: cpu0 on motherboard powernow0: on cpu0 powernow0: STATUS: 0x12040606040c0c0c powernow0: STATUS: maxfid: 0x0c powernow0: STATUS: maxvid: 0x04 powernow0: PSB: VST: 5 powernow0: PSB: RVO 2 IRT 3 MVS 0 BATT 0 powernow: 0 1990000kHz FID 0c VID 06 powernow: 1 1791000kHz FID 0a VID 08 powernow: 2 995000kHz FID 02 VID 12 pci_open(1): mode 1 addr port (0x0cf8) is 0x80012814 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=59501002) pcib0: pcibus 0 on motherboard pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1002, dev=0x5950, revid=0x10 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x5a3f, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x437a, revid=0x80 bus=0, slot=17, func=0 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message map[10]: type 4, range 32, base 0000b800, size 3, enabled map[14]: type 4, range 32, base 0000b400, size 2, enabled map[18]: type 4, range 32, base 0000b000, size 3, enabled map[1c]: type 4, range 32, base 0000a800, size 2, enabled map[20]: type 4, range 32, base 0000a400, size 4, enabled map[24]: type 1, range 32, base fe9fbc00, size 9, enabled found-> vendor=0x1002, dev=0x4379, revid=0x80 bus=0, slot=18, func=0 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message map[10]: type 4, range 32, base 0000a000, size 3, enabled map[14]: type 4, range 32, base 00009800, size 2, enabled map[18]: type 4, range 32, base 00009400, size 3, enabled map[1c]: type 4, range 32, base 00009000, size 2, enabled map[20]: type 4, range 32, base 00008800, size 4, enabled map[24]: type 1, range 32, base fe9fb800, size 9, enabled found-> vendor=0x1002, dev=0x4374, revid=0x80 bus=0, slot=19, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 MSI supports 1 message map[10]: type 1, range 32, base fe9fa000, size 12, enabled found-> vendor=0x1002, dev=0x4375, revid=0x80 bus=0, slot=19, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 MSI supports 1 message map[10]: type 1, range 32, base fe9f9000, size 12, enabled found-> vendor=0x1002, dev=0x4373, revid=0x80 bus=0, slot=19, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message map[10]: type 1, range 32, base fe9f8000, size 12, enabled found-> vendor=0x1002, dev=0x4372, revid=0x81 bus=0, slot=20, func=0 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 00000b00, size 4, enabled map[14]: type 1, range 32, base 00000000, size 10, enabled found-> vendor=0x1002, dev=0x4376, revid=0x80 bus=0, slot=20, func=1 class=01-01-82, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 MSI supports 1 message map[20]: type 4, range 32, base 0000ff00, size 4, enabled found-> vendor=0x1002, dev=0x437b, revid=0x01 bus=0, slot=20, func=2 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base fe9e8000, size 14, enabled found-> vendor=0x1002, dev=0x4377, revid=0x80 bus=0, slot=20, func=3 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4371, revid=0x80 bus=0, slot=20, func=4 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xd000-0xdfff pcib1: memory decode 0xfea00000-0xfeafffff pcib1: prefetched decode 0xf0000000-0xf7ffffff pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x5974, revid=0x00 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base f0000000, size 27, enabled pcib1: (null) requested memory range 0xf0000000-0xf7ffffff: good map[14]: type 4, range 32, base 0000d800, size 8, enabled pcib1: (null) requested I/O range 0xd800-0xd8ff: in range map[18]: type 1, range 32, base feaf0000, size 16, enabled pcib1: (null) requested memory range 0xfeaf0000-0xfeafffff: good pci1: at device 5.0 (no driver attached) atapci0: port 0xb800-0xb807,0xb400-0xb403,0xb000-0xb007,0xa800-0xa803,0xa400-0xa40f mem 0xfe9fbc00-0xfe9fbdff irq 11 at device 17.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xa400 atapci0: [MPSAFE] atapci0: Reserved 0x200 bytes for rid 0x24 type 3 at 0xfe9fbc00 ata2: on atapci0 ata2: SATA connect ready time=10ms ata2: sata_connect devices=0x1 ata2: [MPSAFE] ata3: on atapci0 ata3: SATA connect ready time=10ms ata3: sata_connect devices=0x1 ata3: [MPSAFE] atapci1: port 0xa000-0xa007,0x9800-0x9803,0x9400-0x9407,0x9000-0x9003,0x8800-0x880f mem 0xfe9fb800-0xfe9fb9ff irq 5 at device 18.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8800 atapci1: [MPSAFE] atapci1: Reserved 0x200 bytes for rid 0x24 type 3 at 0xfe9fb800 ata4: on atapci1 ata4: SATA connect status=00000000 ata4: [MPSAFE] ata5: on atapci1 ata5: SATA connect status=00000000 ata5: [MPSAFE] ohci0: mem 0xfe9fa000-0xfe9fafff irq 15 at device 19.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9fa000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ohci1: mem 0xfe9f9000-0xfe9f9fff irq 15 at device 19.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f9000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered ehci0: mem 0xfe9f8000-0xfe9f8fff irq 15 at device 19.2 on pci0 ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f8000 ehci0: [GIANT-LOCKED] ehci0: Dropped interrupts workaround enabled usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 8 ports with 8 removable, self powered pci0: at device 20.0 (no driver attached) atapci2: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00 ata0: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci2: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4 ata0: [MPSAFE] ata1: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci2: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] pci0: at device 20.2 (no driver attached) isab0: at device 20.3 on pci0 isa0: on isab0 pcib2: at device 20.4 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xe000-0xefff pcib2: memory decode 0xfeb00000-0xfebfffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: Subtractively decoded bridge. pci2: on pcib2 pci2: physical bus=2 found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=2, slot=3, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000e800, size 8, enabled pcib2: (null) requested I/O range 0xe800-0xe8ff: in range map[14]: type 1, range 32, base febffc00, size 8, enabled pcib2: (null) requested memory range 0xfebffc00-0xfebffcff: good found-> vendor=0x1106, dev=0x3044, revid=0x80 bus=2, slot=4, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) intpin=a, irq=9 powerspec 2 supports D0 D2 D3 current D0 map[10]: type 1, range 32, base febff000, size 11, enabled pcib2: (null) requested memory range 0xfebff000-0xfebff7ff: good map[14]: type 4, range 32, base 0000e400, size 7, enabled pcib2: (null) requested I/O range 0xe400-0xe47f: in range rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800 pcib2: rl0 requested I/O range 0xe800-0xe8ff: in range rl0: port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 5 at device 3.0 on pci2 pcib2: rl0 requested I/O range 0xe800-0xe8ff: in range miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached rl0: Ethernet address: 00:13:d3:bf:cd:01 rl0: [MPSAFE] fwohci0: port 0xe400-0xe47f mem 0xfebff000-0xfebff7ff irq 9 at device 4.0 on pci2 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfebff000 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:10:dc:00:00:d5:55:4a fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:10:dc:d5:55:4a fwe0: bpf attached fwe0: Ethernet address: 02:10:dc:d5:55:4a fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcefff on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: failed to reset the aux device. fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. linprocfs registered procfs registered Timecounter "TSC" frequency 1994213198 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on IXP400 chip acd0: setting UDMA33 on IXP400 chip acd0: DVDR drive at ata0 as master acd0: read 8268KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 157066MB at ata2-master SATA150 ad4: 321672960 sectors [319120C/16H/63S] 16 sectors/interrupt 1 depth queue ad4: Silicon Image check3 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad6: 157066MB at ata3-master SATA150 ad6: 321672960 sectors [319120C/16H/63S] 16 sectors/interrupt 1 depth queue ad6: Silicon Image check3 failed ad6: Adaptec check1 failed ad6: LSI (v3) check1 failed ad6: LSI (v2) check1 failed ad6: FreeBSD check1 failed GEOM: new disk ad4 (probe3:sbp0:0:2:0): error 22 (probe3:sbp0:0:2:0): Unretryable Error (probe4:sbp0:0:3:0): error 22 (probe4:sbp0:0:3:0): Unretryable Error (probe5:sbp0:0:4:0): error 22 (probe5:sbp0:0:4:0): Unretryable Error (probe1:sbp0:0:0:0): error 22 (probe1:sbp0:0:0:0): Unretryable Error (probe2:sbp0:0:1:0): error 22 (probe2:sbp0:0:1:0): Unretryable Error (probe6:sbp0:0:5:0): error 22 (probe6:sbp0:0:5:0): Unretryable Error (probe7:sbp0:0:6:0): error 22 (probe7:sbp0:0:6:0): Unretryable Error pass0 at ata0 bus 0 target 0 lun 0 pass0: <_NEC DVD_RW ND-3500AG 2.16> Removable CD-ROM SCSI-0 device pass0: Serial Number [ pass0: 33.000MB/s transfers ATA PseudoRAID loaded cd0 at ata0 bus 0 target 0 lun 0 cd0: <_NEC DVD_RW ND-3500AG 2.16> Removable CD-ROM SCSI-0 device cd0: Serial Number [ cd0: 33.000MB/s transfers cd0: cd present [2295104 x 2048 byte records] GEOM: new disk ad6 GEOM: new disk cd0 GEOM_MIRROR: Device home created (id=2277598117). GEOM_MIRROR: Device home: provider ad4s1g detected. GEOM_MIRROR: Device mp3 created (id=982366028). GEOM_MIRROR: Device mp3: provider ad4s1h detected. GEOM_MIRROR: Device home: provider ad6s1g detected. GEOM_MIRROR: Device home: provider ad6s1g activated. GEOM_MIRROR: Device home: provider ad4s1g activated. GEOM_MIRROR: Device home: provider mirror/home launched. GEOM_MIRROR: Device mp3: provider ad6s1h detected. GEOM_MIRROR: Device mp3: provider ad6s1h activated. GEOM_MIRROR: Device mp3: provider ad4s1h activated. GEOM_MIRROR: Device mp3: provider mirror/mp3 launched. Trying to mount root from ufs:/dev/ad4s1a start_init: trying /sbin/init rl0: link state changed to UP