Date: Mon, 09 Aug 1999 14:57:10 -0400 From: Dave <diacobe@megsinet.net> To: jester@frenzy.com Subject: aha2930cu Message-ID: <99080915083300.16483@Hal>
next in thread | raw e-mail | index | archive | help
mr. johnson, i apologize for contacting you in such a manner but i am unable to locate an answer from any other source. i located your name in the aic7xxx patch file on the linuxhq server and hope you can answer this question. i recently purchased an adaptec 2930 U controller card and noticed prior to installation that the 2930 U now supports scsi 3 and ultra scsi as well as scsi 1, 2, and fast scsi 2. during bootup the card is recognized and says it is an aha-2930 cu instead of just u. all installed scsi devices are properly detected and the card reports the bios is installed successfully. adaptec says this is the c revision of the 2930 U they just released. the problem is that the aic7xxx module is not recognizing the card and says scsi hosts detected 0 during my install. checking the pci data shows an adaptec card is present but has a question mark for the card information. there is no irq conflicts and i have tried several pci slots and i have come to the conclusion the problem lies in the module. i noticed the most recent patch for 2.2.10 now includes support for the 2930U2. will this patch support my 2930 cu card? any help will be greatly appreciated in this matter. -- Dave <diacobe@mesgisnet.net> Linux, for those who expect more from their computers. On a quiet night in Linux country you can hear a windows machine crash :-) ----- End of forwarded message from Dave ----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?99080915083300.16483>