From owner-freebsd-mobile Thu Apr 30 11:50:51 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id LAA27162 for freebsd-mobile-outgoing; Thu, 30 Apr 1998 11:50:51 -0700 (PDT) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from uni4nn.gn.iaf.nl (osmium.gn.iaf.nl [193.67.144.12]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id LAA27132 for ; Thu, 30 Apr 1998 11:50:40 -0700 (PDT) (envelope-from wilko@yedi.iaf.nl) Received: by uni4nn.gn.iaf.nl with UUCP id AA06663 (5.67b/IDA-1.5 for freebsd-mobile@freebsd.org); Thu, 30 Apr 1998 20:50:38 +0200 Received: (from wilko@localhost) by yedi.iaf.nl (8.8.7/8.6.12) id UAA25384 for freebsd-mobile@freebsd.org; Thu, 30 Apr 1998 20:54:01 +0200 (MET DST) From: Wilko Bulte Message-Id: <199804301854.UAA25384@yedi.iaf.nl> Subject: DEPCM ethernet refuses to work To: freebsd-mobile@FreeBSD.ORG Date: Thu, 30 Apr 1998 20:54:01 +0200 (MET DST) X-Organisation: Private FreeBSD site - Arnhem, The Netherlands X-Pgp-Info: PGP public key at 'finger wilko@freefall.freebsd.org' X-Mailer: ELM [version 2.4ME+ PL32 (25)] Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi I've been playing around with my DEPCM ethernet card in the 2.2.5R with latest PAO patches. Sofar, no luck. The pccardd sees the card entering the system, but then says: "device not configured". An Adaptec 1460 SCSI card works OK in the same system so it looks like the problem is specific to the DEPCM. Laptop is a DEC Hinote VP P120 with 40Mb DRAM. Below is the dumpcis of the DEPCM, I hope that a knowledgeable person might be able to see what causes the problem. Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: dc 03 ff Common memory device information: Device number 1, type Function specific, WPS = ON Speed = 100nS, Memory block size = 32Kb, 1 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3 000: 53 01 ff Attribute memory device information: Device number 1, type FLASH EEPROM, WPS = OFF Speed = 150nS, Memory block size = 2Kb, 1 units Tuple #3, code = 0x21 (Functional ID), length = 2 000: 06 03 Network/LAN adapter - POST initialize - Card has ROM Tuple #4, code = 0x15 (Version 1 info), length = 39 000: 04 01 44 49 47 49 54 41 4c 00 44 45 50 43 4d 2d 010: 58 58 00 31 39 39 34 30 35 33 31 00 41 30 31 2e 020: 30 30 2e 30 31 00 ff Version = 4.1, Manuf = [DIGITAL],card vers = [DEPCM-XX] Addit. info = [19940531],[A01.00.01] Tuple #5, code = 0x1a (Configuration map), length = 5 000: 01 08 00 01 01 Reg len = 2, config register addr = 0x100, last config = 0x8 Registers: X------- Tuple #6, code = 0x1b (Configuration entry), length = 21 000: c1 81 1d 3f 55 4d 5d 06 86 46 26 fc 24 ca 60 00 010: 03 1f 30 38 9e Config index = 0x1(default) Interface byte = 0x81 (I/O) wait signal supported Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4.5 x 1V Maximum operating supply voltage: 5.5 x 1V Continuous supply current: 1 x 100mA Max current average over 1 second: 1 x 100mA, ext = 0x46 Max current average over 10 ms: 2 x 100mA Wait scale Speed = 1.5 x 10 us Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x300 block length = 0x20 IRQ modes: Level IRQs: 3 4 5 9 10 11 12 15 Tuple #7, code = 0x1b (Configuration entry), length = 7 000: 02 08 ca 60 20 03 1f Config index = 0x2 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x320 block length = 0x20 Tuple #8, code = 0x1b (Configuration entry), length = 7 000: 03 08 ca 60 40 03 1f Config index = 0x3 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x340 block length = 0x20 Tuple #9, code = 0x1b (Configuration entry), length = 7 000: 04 08 ca 60 60 03 1f Config index = 0x4 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x360 block length = 0x20 Tuple #10, code = 0x1b (Configuration entry), length = 7 000: 05 08 ca 60 00 02 1f Config index = 0x5 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x200 block length = 0x20 Tuple #11, code = 0x1b (Configuration entry), length = 7 000: 06 08 ca 60 40 7f 1f Config index = 0x6 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x7f40 block length = 0x20 Tuple #12, code = 0x1b (Configuration entry), length = 7 000: ff ff ff ff ff ff ff Config index = 0x3f(default) Interface byte = 0xff (reserved) BVD1/2 active, card WP active, +RDY/-BSY active, wait signal supported Vcc pwr: Nominal operating supply voltage: 9 x 100V, ext = 0xff, ext = 0xff, ext = 0x0 Minimum operating supply voltage: 1 x 10uV Maximum operating supply voltage: 1 x 10uV Continuous supply current: 1 x 10nA Max current average over 1 second: 1 x 10nA Max current average over 10 ms: 1 x 10nA Power down supply current: 1 x 10nA Reserved: 1 x 10nA Vpp1 pwr: Vpp2 pwr: Wait scale Speed = Reserved x 1 ns RDY/BSY scale Speed = Reserved x 1 ns External scale Speed = 8.0 x 10 ms Card provides address decode IRQ modes: IRQ level = 0 Memory descriptor 1 Max twin cards = 0 Misc attr: Tuple #13, code = 0xff (Terminator), length = 0 2 slots found _ ______________________________________________________________________ | / o / / _ Bulte email: wilko @ yedi.iaf.nl |/|/ / / /( (_) Arnhem, The Netherlands WWW: http://www.tcja.nl ______________________________________________ Powered by FreeBSD __________ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message