Date: Sun, 21 Jul 2002 19:16:16 +0200 From: Emanuel Haupt <haupt@outof.ch> To: freebsd-mobile@freebsd.org Subject: dialup question Message-ID: <200207211916.16856.haupt@outof.ch>
next in thread | raw e-mail | index | archive | help
--------------Boundary-00=_4ZZLYU2B3GVLGCRLL3IP Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable i am using the following network/modem (all in 1) card on my dell=20 latitude cpx laptop (running fbsd 5.0-DP1 newcard kernel): 3com 3c3fem656 c the xl0 network interface works without any problems. but now i want to=20 use the included modem. i have absolutely no clue which device that would be. attached is the=20 complete dmesg output. does anyone know which device i have to configure in my ppp.conf? thanks in advance emanuel --------------Boundary-00=_4ZZLYU2B3GVLGCRLL3IP Content-Type: text/plain; charset="us-ascii"; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-DP1 #0: Sun Jul 21 17:43:29 CEST 2002 root@snood.critical.ch:/usr/src/sys/i386/compile/SNOOD2 Preloaded elf kernel "/boot/kernel/kernel" at 0xc063b000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc063b0a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 498470166 Hz CPU: Pentium III/Pentium III Xeon/Celeron (498.47-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 134066176 (130924K bytes) avail memory = 123580416 (120684K bytes) Pentium Pro MTRR support enabled Using $PIR table, 6 entries at 0xc00fbd20 npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard Timecounter "ACPI-safe" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <PCI bus> on acpi_pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pccbb0: <TI1225 PCI-CardBus Bridge> at device 3.0 on pci0 cardbus0: <CardBus bus> on pccbb0 pccard0: <16-bit PCCard bus> on pccbb0 acpi_pcib0: device is routed to IRQ 11 pccbb1: <TI1225 PCI-CardBus Bridge> at device 3.1 on pci0 cardbus1: <CardBus bus> on pccbb1 pccard1: <16-bit PCCard bus> on pccbb1 acpi_pcib0: device is routed to IRQ 11 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11 at device 7.2 on pci0 usb0: cannot stop usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pci0: <multimedia, audio> at device 8.0 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x280-0x287,0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 IPsec: Initialized Security Association Processing. IP Filter: v3.4.20 initialized. Default = pass all, Logging = enabled system power profile changed to 'economy' Product version: 5.0 Product name: 3Com Corporation | 3CXFEM656C-LAN | LAN | 1 | Manufacturer ID: 02016465 Functions: Network Adaptor, Multi-Functioned CIS reading done cardbus0: Resource not specified in CIS: id=18, size=80 xl0: <3Com 3c656C Fast Etherlink XL> port 0x1000-0x107f mem 0x84002100-0x8400217f,0x84002000-0x840020ff irq 11 at device 0.0 on cardbus0 xl0: Ethernet address: 00:01:03:9a:dd:84 miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Product version: 5.0 Product name: 3Com Corporation | 3CXFEM656C-MDM | MDM | 1 | Manufacturer ID: 02016565 Functions: Serial Port, Multi-Functioned Function Extension: 011f3f000400000400 Function Extension: 0206003f1c03030f060000ff Function Extension: 1306000f006a00ff Function Extension: 2306000f000200ff CIS reading done cardbus0: Resource not specified in CIS: id=10, size=100 cardbus0: Resource not specified in CIS: id=14, size=100 cardbus0: <unknown card> (vendor=0x10b7, dev=0x6565) at 0.1 irq 11 ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master UDMA33 acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a --------------Boundary-00=_4ZZLYU2B3GVLGCRLL3IP-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200207211916.16856.haupt>