Date: 21 Apr 1999 14:07:27 -0400 From: Chris Shenton <cshenton@uucom.com> To: Palle Girgensohn <girgen@partitur.se> Cc: freebsd-scsi@FreeBSD.ORG Subject: Re: seagate python taper? Message-ID: <lfyajlc0f4.fsf@Samizdat.uucom.com> In-Reply-To: Palle Girgensohn's message of "Wed, 21 Apr 1999 18:30:39 %2B0200" References: <371DFD2F.B0ED8377@partitur.se>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 21 Apr 1999 18:30:39 +0200, Palle Girgensohn <girgen@partitur.se> said: Palle> Hi! Seagate Python DDS-3. On FreeBSD 3.1 with 1542-CP? Is it Palle> OK. I read a message from a year ago that stated: >> Just for your information! Don't use any combination of Seagate >> Python DAT drives, Adaptec 2940 SCSI controller and FreeBSD or >> Linux! Palle> http://www.freebsd.org/cgi/getmsg.cgi?fetch=39897+0+/usr/local/www/db/text/1998/freebsd-scsi/19980222.freebsd-scsi Palle> On the other hand, others seem to have no problem, and this Palle> taper will run on a fresh 3.1 stable (last build this Palle> weekend). I do use a 2940-UW, but probably not for the disks Palle> and will use 1542-CP for the taper. Will this be OK? I'm using a 2940 with a Python 4xDDS2 drive on 3.1-STABLE: ahc0: <Adaptec 2940 SCSI adapter> rev 0x03 int a irq 9 on pci0.8.0 ahc0: aic7870 Single Channel A, SCSI Id=7, 16/255 SCBs sa0: <ARCHIVE Python 28849-XXX 4.CM> Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 15) ch0 at ahc0 bus 0 target 4 lun 1 ch0: <ARCHIVE Python 28849-XXX 4.CM> Removable Changer SCSI-2 device ch0: 5.000MB/s transfers (5.000MHz, offset 15) ch0: 4 slots, 1 drive, 1 picker, 0 portals Palle> tape length and other nice parameters for amanda? They would Palle> make me happy ;-) Again, I'm using DDS2 so my Amanda info wouldnb't help with tape size. I did find that the chg-chip script didn't quite work -- I had to comment out a print statement that confused Amanda when it returned: *** chg-chio.ORIG Wed Feb 24 11:48:14 1999 --- chg-chio Sat Mar 20 16:21:44 1999 *************** *** 347,353 **** $currentTape = 1; } - print STDERR "$currentTape $max_slot 1\n"; print "$currentTape $max_slot 1\n"; exit 0; } To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?lfyajlc0f4.fsf>