From owner-freebsd-alpha Sat May 6 22:46:33 2000 Delivered-To: freebsd-alpha@freebsd.org Received: from feral.com (feral.com [192.67.166.1]) by hub.freebsd.org (Postfix) with ESMTP id 13A0E37B9BC for ; Sat, 6 May 2000 22:46:28 -0700 (PDT) (envelope-from mjacob@feral.com) Received: from semuta.feral.com (semuta [192.67.166.70]) by feral.com (8.9.3/8.9.3) with ESMTP id WAA19860; Sat, 6 May 2000 22:45:29 -0700 Date: Sat, 6 May 2000 22:45:50 -0700 (PDT) From: Matthew Jacob Reply-To: mjacob@feral.com To: alpha@freebsd.org Subject: AlphaServer 4100 Support being integrated Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-alpha@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I'm up and running. It's early days yet, but it's looking pretty good.... Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #15: Sat May 6 22:36:27 PDT 2000 mjacob@farrago.feral.com:/tstsys/compile/RAWHIDE AlphaServer 4100 AlphaServer 4100 5/533 4MB, 531MHz 8192 byte page size, 1 processor. CPU: EV56 (21164A) major=7 minor=2 extensions=0x1 OSF PAL rev: 0x4000100020117 real memory = 1608482816 (1570784K bytes) Physical memory chunk(s): 0x00722000 - 0x5ffeffff, 1603067904 bytes (195687 pages) avail memory = 1557495808 (1520992K bytes) Preloaded elf kernel "kernel" at 0xfffffc0000706000. md0: Malloc disk Creating DISK md0 mcpcia0: at mcbus0 gid 7 mid 5 mcpcia0: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2 found-> vendor=0x1000, dev=0x0001, revid=0x02 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=4 map[10]: type 1, range 32, base 01fffc00, size 8, enabled map[14]: type 1, range 32, base 07fdde00, size 8, enabled found-> vendor=0x1011, dev=0x0009, revid=0x12 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=8 map[10]: type 1, range 32, base 01fffd00, size 7, enabled map[14]: type 1, range 32, base 07fddf00, size 7, enabled found-> vendor=0x1077, dev=0x1020, revid=0x05 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=16 map[10]: type 1, range 32, base 01fffe00, size 8, enabled map[14]: type 1, range 32, base 07fde000, size 12, enabled found-> vendor=0x1077, dev=0x1020, revid=0x05 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=20 map[10]: type 1, range 32, base 01ffff00, size 8, enabled map[14]: type 1, range 32, base 07fdf000, size 12, enabled pci0: on pcib0 sym0: <810> port 0x1fffc00-0x1fffcff mem 0x7fdde00-0x7fddeff irq 4 at device 1.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: open drain IRQ line driver sym0: using NCR-generic firmware. sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00 sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00 sym0: Delay (GEN=11): 403 msec, 22055 KHz sym0: Delay (GEN=11): 426 msec, 20864 KHz sym0: Delay (GEN=11): 426 msec, 20864 KHz sym0: interrupting at IRQ 0x10 INTA (vec 0xb40) de0: port 0x1fffd00-0x1fffd7f mem 0x7fddf00-0x7fddf7f irq 8 at device 2.0 on pci0 de0: interrupting at IRQ 0x0 INTA (vec 0xb80) de0: DEC DE500-XA 21140 [10-100Mb/s] pass 1.2 de0: address 00:00:f8:01:8b:d7 de0: enabling Full Duplex 100baseTX port de0: supplying EUI64: 00:00:f8:ff:fe:01:8b:d7 bpf: de0 attached Qlogic ISP Driver, FreeBSD Version 5.0, Core Version 1.14 isp0: port 0x1fffe00-0x1fffeff mem 0x7fde000-0x7fdefff irq 16 at device 4.0 on pci0 isp0: using I/O space register mapping isp0: interrupting at IRQ 0x8 INTA (vec 0xc00) isp0: Ultra Mode Capable isp0: Board Revision 1040B, resident F/W Revision 5.57.1 isp0: Last F/W revision was 5.57.1 isp0: 256 max I/O commands supported isp1: port 0x1ffff00-0x1ffffff mem 0x7fdf000-0x7fdffff irq 20 at device 5.0 on pci0 isp1: using I/O space register mapping isp1: interrupting at IRQ 0xc INTA (vec 0xc40) isp1: Differential Mode isp1: Ultra Mode Capable isp1: Board Revision 1040B, resident F/W Revision 5.57.1 isp1: Last F/W revision was 5.57.1 isp1: 256 max I/O commands supported mcpcia1: at mcbus0 gid 7 mid 4 mcpcia1: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2 found-> vendor=0x8086, dev=0x0482, revid=0x15 class=00-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 pci1: on pcib1 isab0: at device 1.0 on pci1 isa0: on isab0 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: interrupting at ISA irq 6 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 atkbd0: irq 1 on atkbdc0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000 atkbd0: interrupting at ISA irq 1 psm0: current command byte:0061 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. sc0: no video adapter is found. mcclock0: at port 0x70-0x71 on isa0 Calibrating clock(s) ... PCC clock: 532793392 Hz (firmware 531914893 Hz) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: irq maps: 0 0 0 0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A sio0: interrupting at ISA irq 4 sio1: reserved for low-level i/o isa_probe_children: probing PnP devices Timecounter "alpha" frequency 532793392 Hz bpf: sl0 attached bpf: ppp0 attached bpf: lo0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: stf0 attached bpf: faith0 attached Waiting 15 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. isp0: driver initiated bus reset of bus 0 isp1: driver initiated bus reset of bus 0 (probe5:sym0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe5:sym0:0:5:0): ILLEGAL REQUEST asc:24,0 (probe5:sym0:0:5:0): Invalid field in CDB sks:c8,1 isp0: 0.0 get user period 0xc offset 0x8 flags 0xfd00 isp0: 0.0 get current period 0x19 offset 0x0 flags 0xc500 isp0: 0.0 set current period 0xc offset 0x8 flags 0xfd00 isp0: 0.1 get user period 0xc offset 0x8 flags 0xfd00 isp0: 0.1 get current period 0x19 offset 0x0 flags 0xc500 isp0: 0.1 set current period 0xc offset 0x8 flags 0xfd00 Creating DISK cd0 Creating DISK da0 Creating DISK da1 pass0 at sym0 bus 0 target 5 lun 0 pass0: Removable CD-ROM SCSI-2 device pass0: 10.000MB/s transfers (10.000MHz, offset 8) pass1 at sym0 bus 0 target 6 lun 0 pass1: Removable Sequential Access SCSI-2 device pass1: Serial Number 0003203169 pass1: 10.000MB/s transfers (10.000MHz, offset 8) pass2 at isp0 bus 0 target 0 lun 0 pass2: Fixed Direct Access SCSI-2 device pass2: Serial Number JDB918630DTP98 isp0: 0.0 get current period 0xc offset 0x8 flags 0xfd00 pass2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled pass3 at isp0 bus 0 target 1 lun 0 pass3: Fixed Direct Access SCSI-2 device pass3: Serial Number 6810CA31 isp0: 0.1 get current period 0xc offset 0x8 flags 0xfd00 pass3: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled sa0 at sym0 bus 0 target 6 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: Serial Number 0003203169 sa0: 10.000MB/s transfers (10.000MHz, offset 8) da0 at isp0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: Serial Number JDB918630DTP98 isp0: 0.0 get current period 0xc offset 0x8 flags 0xfd00 da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4148MB (8496884 512 byte sectors: 255H 63S/T 528C) da1 at isp0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: Serial Number 6810CA31 isp0: 0.1 get current period 0xc offset 0x8 flags 0xfd00 da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 4303MB (8813870 512 byte sectors: 255H 63S/T 548C) Mounting root from ufs:/dev/da1a (cd0:sym0:0:5:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:sym0:0:5:0): NOT READY asc:3a,0 (cd0:sym0:0:5:0): Medium not present cd0 at sym0 bus 0 target 5 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 8) cd0: Attempt to query device size failed: NOT READY, Medium not present da1: invalid primary partition table: no magic start_init: trying /sbin/init de0: starting DAD for fe80:0001::0200:f8ff:fe01:8bd7 de0: DAD complete for fe80:0001::0200:f8ff:fe01:8bd7 - no duplicates found WARNING: run /dev/MAKEDEV before 2000-06-01 to get rid of block devices To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message