Date: Sat, 6 May 2000 22:45:50 -0700 (PDT) From: Matthew Jacob <mjacob@feral.com> To: alpha@freebsd.org Subject: AlphaServer 4100 Support being integrated Message-ID: <Pine.BSF.4.05.10005062244120.20474-100000@semuta.feral.com>
next in thread | raw e-mail | index | archive | help
I'm up and running. It's early days yet, but it's looking pretty good....
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #15: Sat May 6 22:36:27 PDT 2000
mjacob@farrago.feral.com:/tstsys/compile/RAWHIDE
AlphaServer 4100
AlphaServer 4100 5/533 4MB, 531MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x4000100020117
real memory = 1608482816 (1570784K bytes)
Physical memory chunk(s):
0x00722000 - 0x5ffeffff, 1603067904 bytes (195687 pages)
avail memory = 1557495808 (1520992K bytes)
Preloaded elf kernel "kernel" at 0xfffffc0000706000.
md0: Malloc disk
Creating DISK md0
mcpcia0: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 5
mcpcia0: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
found-> vendor=0x1000, dev=0x0001, revid=0x02
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=4
map[10]: type 1, range 32, base 01fffc00, size 8, enabled
map[14]: type 1, range 32, base 07fdde00, size 8, enabled
found-> vendor=0x1011, dev=0x0009, revid=0x12
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=8
map[10]: type 1, range 32, base 01fffd00, size 7, enabled
map[14]: type 1, range 32, base 07fddf00, size 7, enabled
found-> vendor=0x1077, dev=0x1020, revid=0x05
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=16
map[10]: type 1, range 32, base 01fffe00, size 8, enabled
map[14]: type 1, range 32, base 07fde000, size 12, enabled
found-> vendor=0x1077, dev=0x1020, revid=0x05
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=20
map[10]: type 1, range 32, base 01ffff00, size 8, enabled
map[14]: type 1, range 32, base 07fdf000, size 12, enabled
pci0: <PCI bus> on pcib0
sym0: <810> port 0x1fffc00-0x1fffcff mem 0x7fdde00-0x7fddeff irq 4 at device 1.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using NCR-generic firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00
sym0: Delay (GEN=11): 403 msec, 22055 KHz
sym0: Delay (GEN=11): 426 msec, 20864 KHz
sym0: Delay (GEN=11): 426 msec, 20864 KHz
sym0: interrupting at IRQ 0x10 INTA (vec 0xb40)
de0: <Digital 21140 Fast Ethernet> port 0x1fffd00-0x1fffd7f mem 0x7fddf00-0x7fddf7f irq 8 at device 2.0 on pci0
de0: interrupting at IRQ 0x0 INTA (vec 0xb80)
de0: DEC DE500-XA 21140 [10-100Mb/s] pass 1.2
de0: address 00:00:f8:01:8b:d7
de0: enabling Full Duplex 100baseTX port
de0: supplying EUI64: 00:00:f8:ff:fe:01:8b:d7
bpf: de0 attached
Qlogic ISP Driver, FreeBSD Version 5.0, Core Version 1.14
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1fffe00-0x1fffeff mem 0x7fde000-0x7fdefff irq 16 at device 4.0 on pci0
isp0: using I/O space register mapping
isp0: interrupting at IRQ 0x8 INTA (vec 0xc00)
isp0: Ultra Mode Capable
isp0: Board Revision 1040B, resident F/W Revision 5.57.1
isp0: Last F/W revision was 5.57.1
isp0: 256 max I/O commands supported
isp1: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1ffff00-0x1ffffff mem 0x7fdf000-0x7fdffff irq 20 at device 5.0 on pci0
isp1: using I/O space register mapping
isp1: interrupting at IRQ 0xc INTA (vec 0xc40)
isp1: Differential Mode
isp1: Ultra Mode Capable
isp1: Board Revision 1040B, resident F/W Revision 5.57.1
isp1: Last F/W revision was 5.57.1
isp1: 256 max I/O commands supported
mcpcia1: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 4
mcpcia1: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
found-> vendor=0x8086, dev=0x0482, revid=0x15
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
pci1: <PCI bus> on pcib1
isab0: <Intel 82375EB PCI-EISA bridge> at device 1.0 on pci1
isa0: <ISA bus> on isab0
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: interrupting at ISA irq 1
psm0: current command byte:0061
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
sc0: no video adapter is found.
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Calibrating clock(s) ... PCC clock: 532793392 Hz (firmware 531914893 Hz)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: irq maps: 0 0 0 0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio0: interrupting at ISA irq 4
sio1: reserved for low-level i/o
isa_probe_children: probing PnP devices
Timecounter "alpha" frequency 532793392 Hz
bpf: sl0 attached
bpf: ppp0 attached
bpf: lo0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: stf0 attached
bpf: faith0 attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
isp0: driver initiated bus reset of bus 0
isp1: driver initiated bus reset of bus 0
(probe5:sym0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe5:sym0:0:5:0): ILLEGAL REQUEST asc:24,0
(probe5:sym0:0:5:0): Invalid field in CDB sks:c8,1
isp0: 0.0 get user period 0xc offset 0x8 flags 0xfd00
isp0: 0.0 get current period 0x19 offset 0x0 flags 0xc500
isp0: 0.0 set current period 0xc offset 0x8 flags 0xfd00
isp0: 0.1 get user period 0xc offset 0x8 flags 0xfd00
isp0: 0.1 get current period 0x19 offset 0x0 flags 0xc500
isp0: 0.1 set current period 0xc offset 0x8 flags 0xfd00
Creating DISK cd0
Creating DISK da0
Creating DISK da1
pass0 at sym0 bus 0 target 5 lun 0
pass0: <DEC RRD46 (C) DEC 1337> Removable CD-ROM SCSI-2 device
pass0: 10.000MB/s transfers (10.000MHz, offset 8)
pass1 at sym0 bus 0 target 6 lun 0
pass1: <DEC TLZ09 (C)DEC 0173> Removable Sequential Access SCSI-2 device
pass1: Serial Number 0003203169
pass1: 10.000MB/s transfers (10.000MHz, offset 8)
pass2 at isp0 bus 0 target 0 lun 0
pass2: <SEAGATE ST34371W 0484> Fixed Direct Access SCSI-2 device
pass2: Serial Number JDB918630DTP98
isp0: 0.0 get current period 0xc offset 0x8 flags 0xfd00
pass2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
pass3 at isp0 bus 0 target 1 lun 0
pass3: <IBM DCHS04U 2929> Fixed Direct Access SCSI-2 device
pass3: Serial Number 6810CA31
isp0: 0.1 get current period 0xc offset 0x8 flags 0xfd00
pass3: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
sa0 at sym0 bus 0 target 6 lun 0
sa0: <DEC TLZ09 (C)DEC 0173> Removable Sequential Access SCSI-2 device
sa0: Serial Number 0003203169
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
da0 at isp0 bus 0 target 0 lun 0
da0: <SEAGATE ST34371W 0484> Fixed Direct Access SCSI-2 device
da0: Serial Number JDB918630DTP98
isp0: 0.0 get current period 0xc offset 0x8 flags 0xfd00
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4148MB (8496884 512 byte sectors: 255H 63S/T 528C)
da1 at isp0 bus 0 target 1 lun 0
da1: <IBM DCHS04U 2929> Fixed Direct Access SCSI-2 device
da1: Serial Number 6810CA31
isp0: 0.1 get current period 0xc offset 0x8 flags 0xfd00
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 4303MB (8813870 512 byte sectors: 255H 63S/T 548C)
Mounting root from ufs:/dev/da1a
(cd0:sym0:0:5:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:sym0:0:5:0): NOT READY asc:3a,0
(cd0:sym0:0:5:0): Medium not present
cd0 at sym0 bus 0 target 5 lun 0
cd0: <DEC RRD46 (C) DEC 1337> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da1: invalid primary partition table: no magic
start_init: trying /sbin/init
de0: starting DAD for fe80:0001::0200:f8ff:fe01:8bd7
de0: DAD complete for fe80:0001::0200:f8ff:fe01:8bd7 - no duplicates found
WARNING: run /dev/MAKEDEV before 2000-06-01 to get rid of block devices
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.10005062244120.20474-100000>