Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 16 Apr 2000 00:31:11 -0700 (PDT)
From:      Bhishan Hemrajani <bhishan@cytosine.dhs.org>
To:        William Freeman <wdf@picusnet.com>
Cc:        freebsd-questions@FreeBSD.ORG
Subject:   Re: SMC Thin Ethernet under 4.0
Message-ID:  <200004160731.e3G7VBE07635@cytosine.dhs.org>
In-Reply-To: <38F92CC9.B5E6292C@picusnet.com> from William Freeman at "Apr 15, 2000 11:00:26 pm"

next in thread | previous in thread | raw e-mail | index | archive | help
I suspect a problem with ipv6. Why don't you disable it, since you don't seem to
need it.

--bhishan

> Ok, we have a copy of WinNT on the other box right now to get some IRQ settings
> and stuff.  I can telnet to my NIC, but we can't ping back and forth and he can't
> telnet into me.  Think you could help out?
> 
> 
> 
> 
> Bhishan Hemrajani wrote:
> 
> > Do you have a public interface in order to do nat?
> > The first ethernet card seems fine. However, in order to do NAT, you have to
> > have an interface to be routing to.
> >
> > Once you configure your public interface, then read the manpage for natd (all
> > the way at the bottom) and it has exact instructions on how to do this.
> >
> > --bhishan
> >
> > > well, i'm not exactly sure.  we have never built a LAN before as we never had
> > > the need to do so.  I know how it should work, but my friend is having a hell
> > > of a time getting FreeBSD on his box (he has some unique configurations).
> > > when i ifconfig ed0:
> > >
> > >
> > > ed0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> > >         inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
> > >         inet6 fe80::200:c0ff:fe7d:f56%ed0 prefixlen 64 scopeid 0x2
> > >         ether 00:00:c0:7d:0f:56
> > > i don't know what it should say, so i don't know if my card is configured
> > > correctly.  I think it is, though.
> > >
> > > Bhishan Hemrajani wrote:
> > >
> > > > We need a lot more information in order for us to help you.
> > > >
> > > > First, are both of your ethernet cards configured properly? (Meaning you
> > > > can ping, telnet, etc. using both cards)
> > > >
> > > > # ifconfig -a
> > > >
> > > > Second, have you read the nat manpage? (It has step by step instructions
> > > > on how to do this)
> > > >
> > > > $ man natd
> > > >
> > > > Third, have you searched the mailing lists? (There are at least one hundred
> > > > instances of this)
> > > >
> > > > $ lynx http://www.freebsd.org/search
> > > >
> > > > --bhishan
> > > >
> > > > > My friends and I are atempting to have a network party tomorrow, how
> > > > > ever i can't make most devices i need i think.  i have an ed0 for my NIC
> > > > >
> > > > > and it's bound to 10.0.0.1 (i'll also be running NATd).  Anyone one have
> > > > >
> > > > > any advice on makeing things work correctly?  from the tests wee have
> > > > > tried, i don't think they are.  Any help on how to set up this would be
> > > > > greatly appreciated.
> > > > >
> > > > >
> > > > >
> > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > > > > with "unsubscribe freebsd-questions" in the body of the message
> > > > >
> > >
> > > --
> > > William D. Freeman [wdf@picusnet.com]
> > > http://members.xoom.com/EvilGNU
> > > -----BEGIN GEEK CODE BLOCK-----
> > > Version: 3.12
> > > GU d? s+:++ a--- C++ UB+++ P+ L- E W++ N- o-- K---- w---
> > > O---- M- V-- PS--- PE++ Y-- PGP---- t+ 5-- X++ R tv b+ DI++++ D---
> > > G- e- h! r !y+
> > > ------END GEEK CODE BLOCK------
> > >
> > >
> >
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-questions" in the body of the message
> 
> --
> William D. Freeman [wdf@picusnet.com]
> http://members.xoom.com/EvilGNU
> -----BEGIN GEEK CODE BLOCK-----
> Version: 3.12
> GU d? s+:++ a--- C++ UB+++ P+ L- E W++ N- o-- K---- w---
> O---- M- V-- PS--- PE++ Y-- PGP---- t+ 5-- X++ R tv b+ DI++++ D---
> G- e- h! r !y+
> ------END GEEK CODE BLOCK------
> 
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200004160731.e3G7VBE07635>