From owner-freebsd-alpha Mon May 21 8:50:29 2001 Delivered-To: freebsd-alpha@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id E0E3D37B424 for ; Mon, 21 May 2001 08:50:19 -0700 (PDT) (envelope-from wkb@freebie.demon.nl) Received: from [195.11.243.26] (helo=Debug) by post.mail.nl.demon.net with smtp (Exim 3.22 #1) id 151rwo-000GPN-00; Mon, 21 May 2001 15:50:18 +0000 To: freebsd-alpha@freebsd.org From: Wilko Bulte Subject: 4.3R on big hulking Tlaser.. Date: Mon, 21 May 2001 15:50:18 GMT X-Mailer: www.webmail.nl.demon.net X-Sender: postmaster@freebie.demon.nl X-Originating-IP: 161.114.88.76 Message-Id: Sender: owner-freebsd-alpha@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Hi, Finally found some time to 'dd' the 2 Mbyte floppy image to a SCSI disk and boot the 8-cpu AS8400 from that disk. As you can see below that worked fine. It is currently installing from CDROM. I'll have it do a buildworld overnight. I hope to go to -current pretty soon, as the other 7 CPUs feel so bored ;) It is currently only 256MB of RAM, the other 3 memory modules are 4GB a piece and therefore too big for FreeBSD's taste. I have to check on the KZPAA (NCR810), the console also has problems using the CDROM attached to it. cheers, Wilko Script started on Mon May 21 15:04:19 2001 chuck#telnet dsrv2 2001 Trying 172.16.10.51... Connected to dsrv2. Escape character is '^]'. e8.e7.e6.e5.e3. F E D C B A 9 8 7 6 5 4 3 2 1 0 NODE # A . . M . P P P P TYP o . . + . ++ ++ ++ ++ ST1 . . . . . EE EE EE EB BPD o . . + . ++ ++ ++ ++ ST2 . . . . . EE EE EE EB BPD c3.e2.e0.ce.cd.cb.de.ca.c9.c8. c7.c5.c4.c3.dd.dc.db.da.d9. + . . + . ++ ++ ++ ++ ST3 . . . . . EE EE EE EB BPD d8.d7.d6.d5.d4. . . . + + + + . + . . . C0 PCI + . . . . . . . . + . . . C1 PCI + . + . . . . . . + . . . C2 PCI + . + . . . . . . + . . . C3 PCI + . . . A0 . . . . . ILV . . . 256 . . . . . 256MB AlphaServer 8400 8-5/625/4, Console V5.8-2 21-JUL-2000 16:30:31 SROM V3.1, OpenVMS PALcode V1.21-1, Tru64 UNIX PALcode V1.23-1 System Serial = AY60323611, OS = UNIX, 15:01:17 May 21, 2001 Configuring I/O adapters... isp0, slot 3, bus 0, hose0 tulip0, slot 5, bus 0, hose0 kzpaa0, slot 6, bus 0, hose0 isp1, slot 7, bus 0, hose0 tulip1, slot 8, bus 0, hose0 isp2, slot 3, bus 0, hose1 kzpsa0, slot 3, bus 0, hose2 kgpsa0, slot 10, bus 0, hose2 kzpsa1, slot 3, bus 0, hose3 kgpsa1, slot 10, bus 0, hose3 Configuration completed Checking system information P00>>>sho dev polling for units on isp0, slot 3, bus 0, hose0... pka.7.0.3.0 pka term on Bus ID 7 5.57 polling for units on kzpaa0, slot 6, bus 0, hose0... pkb.7.0.6.0 pkb Bus ID 7 polling for units on isp1, slot 7, bus 0, hose0... pkc.7.0.7.0 pkc term on Bus ID 7 5.57 dkc100.1.0.7.0 DKC100 RZ29B 0014 polling for units on isp2, slot 3, bus 0, hose1... pkd.7.0.3.1 pkd term off Bus ID 7 5.57 dkd100.1.0.3.1 DKD100 RZ29B 0014 dkd200.2.0.3.1 DKD200 RZ29B 0014 dkd300.3.0.3.1 DKD300 RZ29B 0014 dkd400.4.0.3.1 DKD400 RZ29B 0014 dkd500.5.0.3.1 DKD500 RZ28D 0008 polling for units on kzpsa0, slot 3, bus 0, hose2... pke.7.0.3.2 pke TPwr 1 Fast 1 Bus ID 7 N01 A12 polling for units on kgpsa0, slot 10, bus 0, hose2... kgpsaa0.0.0.10.2 - LINK_DOWN timeout kgpsaa0.0.0.10.2 PGA0 WWN 1000-0000-c921-7fa8 kgpsaa0.0.0.10.2 Link is down. polling for units on kzpsa1, slot 3, bus 0, hose3... pkf.7.0.3.3 pkf TPwr 1 Fast 1 Bus ID 7 N01 A12 polling for units on kgpsa1, slot 10, bus 0, hose3... kgpsab0.0.0.10.3 - LINK_DOWN timeout kgpsab0.0.0.10.3 PGB0 WWN 1000-0000-c921-7ea0 kgpsab0.0.0.10.3 Link is down. P00>>>boot dkc100 (boot dkc100.1.0.7.0 -flags a) SRM boot identifier: scsi 0 7 0 1 100 ef00 10201077 boot adapter: isp1 rev 5 in bus slot 7 off of kftha0 in TLSB slot 8 block 0 of dkc100.1.0.7.0 is a valid boot block reading 15 blocks from dkc100.1.0.7.0 bootstrap code read in Building FRU table....... FRU table size = 3997(14743) base = 200000, image_start = 0, image_bytes = 1e00 initializing HWRPB at 2000 initializing page table at 1f0000 initializing machine state setting affinity to the primary CPU Switch to OSF PAL code succeeded. FreeBSD/alpha SRM disk boot, Revision 1.0 (root@jkh101.osd.bsdi.com, Sat Apr 21 20:20:13 GMT 2001) Memory: 262144 k |/-\|/-\|/-\|/-\|/-\| Hit [Enter] to boot immediately, or any other key for command prompt. Booting [kernel] in 9 seconds... Booting [kernel]... /-\|/-Entering kernel at 0xfffffc000032b8c0... Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-RELEASE #1: Sun Apr 22 02:16:27 GMT 2001 root@jkh101.osd.bsdi.com:/usr/src/sys/compile/BOOTMFS AlphaServer 8400 AlphaServer 8400 5/625, 612MHz 8192 byte page size, 8 processors. CPU: EV56 (21164A) major=7 minor=2 extensions=0x1 OSF PAL rev: 0x10000100020117 real memory = 265650176 (259424K bytes) avail memory = 250814464 (244936K bytes) Preloaded elf kernel "kernel" at 0xfffffc0000924000. md1: Malloc disk tlsbcpu0: at tlsb0 node 0 gbus0 on tlsbcpu0 zsc0: on gbus0 offset 0x10000000 zs0 on zsc0 channel A zs1 on zsc0 channel B mcclock0: on gbus0 offset 0x20000000 tlsbcpu1: at tlsb0 node 0 tlsbcpu2: at tlsb0 node 1 tlsbcpu3: at tlsb0 node 1 tlsbcpu4: at tlsb0 node 2 tlsbcpu5: at tlsb0 node 2 tlsbcpu6: at tlsb0 node 3 tlsbcpu7: at tlsb0 node 3 tlsbmem0: at tlsb0 node 5 kft0: at tlsb0 node 8 dwlpx0: on kft0 hose 0 pci0: on pcib0 isp0: port 0x87fffb00-0x87fffbff mem 0x87f9e000-0x87f9efff irq 12 at device 3.0 on pci0 isp0: Node 8 Hose 0 Slot 3 interrupting at TLSB vector 0x8403 intpin 1 de0: port 0x87fffc00-0x87fffc7f mem 0x87f9dd00-0x87f9dd7f irq 20 at device 5.0 on pci0 de0: Node 8 Hose 0 Slot 5 interrupting at TLSB vector 0x8405 intpin 1 de0: DEC 21040 [10Mb/s] pass 2.3 de0: address 00:00:f8:20:3b:7b sym0: <810> port 0x87fffd00-0x87fffdff mem 0x87f9de00-0x87f9deff irq 24 at device 6.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking CACHE TEST FAILED: host wrote 1, chip read 38275456. CACHE TEST FAILED: chip wrote 2, host read 0. sym0: CACHE INCORRECTLY CONFIGURED. device_probe_and_attach: sym0 attach returned 6 isp1: port 0x87fffe00-0x87fffeff mem 0x87f9f000-0x87f9ffff irq 28 at device 7.0 on pci0 isp1: Node 8 Hose 0 Slot 7 interrupting at TLSB vector 0x8407 intpin 1 de1: port 0x87ffff00-0x87ffff7f mem 0x87f9df00-0x87f9df7f irq 32 at device 8.0 on pci0 de1: Node 8 Hose 0 Slot 8 interrupting at TLSB vector 0x8408 intpin 1 de1: DEC DE500-AA 21140A [10-100Mb/s] pass 2.2 de1: address 00:00:f8:1a:9a:68 de1: enabling 100baseTX port dwlpx1: on kft0 hose 1 pci16: on pcib1 isp2: port 0x8fffff00-0x8fffffff mem 0x8ffef000-0x8ffeffff irq 12 at device 3.0 on pci16 isp2: Node 8 Hose 1 Slot 3 interrupting at TLSB vector 0x8413 intpin 1 dwlpx2: on kft0 hose 2 pci32: on pcib2 pci32: (vendor=0x1011, dev=0x0008) at 3.0 irq 12 pci32: (vendor=0x10df, dev=0xf700) at 10.0 irq 40 dwlpx3: on kft0 hose 3 pci48: on pcib3 pci48: (vendor=0x1011, dev=0x0008) at 3.0 irq 12 pci48: (vendor=0x10df, dev=0xf700) at 10.0 irq 40 Timecounter "alpha" frequency 611787624 Hz Waiting 15 seconds for SCSI devices to settle de0: autosense failed: cable problem? Mounting root from ufs:/dev/md0c da0 at isp1 bus 0 target 1 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) da1 at isp2 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) da4 at isp2 bus 0 target 4 lun 0 da4: Fixed Direct Access SCSI-2 device da4: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da4: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) da5 at isp2 bus 0 target 5 lun 0 da5: Fixed Direct Access SCSI-2 device da5: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da5: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C) da3 at isp2 bus 0 target 3 lun 0 da3: Fixed Direct Access SCSI-2 device da3: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da3: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) da2 at isp2 bus 0 target 2 lun 0 da2: Fixed Direct Access SCSI-2 device da2: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da2: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) WARNING: clock lost 17561 days -- CHECK AND RESET THE DATE! /stand/sysinstall running as init on serial console These are the predefined terminal types available to sysinstall when running stand-alone. Please choose the closest match for your particular terminal. 1 ...................... Standard ANSI terminal. -- | / o / / _ Arnhem, The Netherlands email: wilko@freebsd.org |/|/ / / /( (_) Bulte http://www.freebsd.org http://www.nlfug.nl To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message